Chat with us, powered by LiveChat

Sabra Dipping Co. Processing and Filling Facility

Featured Auction

AUCTION  |  ONSITE & ONLINE  |  TUESDAY, JULY 25, 2017  |  10AM
535 Smith St., Long Island (Farmingdale), NY, 11735                                                                                                                                       

Lease Ending Everything Must Go!!!

(2) Complete Pack Line Cup Filling Lines – Previously Filling Humus, Salsa, Dips @ 50-70 CPM (RECENT UPGRADES!), 2016 HVAC System, (20+) Lee & Mueller Kettles, High Shear Mixers & Processors From 50 – 1,000 Gall, (2) Breddo 50 Gall Likwifiers, Complete 5,000 LBs/Hr HTST System, APV 25 HP 3-Piston 2-Stage Homogenizer Type 24-3B, Quadro Ytron Inline High-Shear Emulsifier Mixer, (25+) WCB Positive Displacement, Centrifugal and Other Pumps (AS NEW AS 2015!), 3-Tank Skid Mounted Approx. 300 Gallon CIP System (BEAUTIFUL SYSTEM!) (2) Jet Spray COP Tanks, Urschel Grinder, Conveyorized Continuous Fryer (ALL S/S!), Videojet 1520 Ink Jet Date Coder, Fulton Vertical Natural Gas Boiler – Model FB-030-A, Complete R&D Laboratory (EXTENSIVE!), 2014 Micro-Motion Mass Flow Meter / Sensor, X-Ray System, Wide Array of Additional General Plant: Allen Bradley Electrical (Control Cabinets Equipped with PLCs & VFDs), Material Handling (Pallet Racking, Forklifts & Pallet Jacks), Machine Shop, Support Equipment, AND MUCH MORE!!!

Small items which can be carried out by hand may be removed by the purchaser at no charge on July 25th, 26th, 27th and 28th. Please schedule your appointment to remove the items with Thomas Paulone Jr at 724-771-7721 or tommy@mdavisgroup.com.
All installed items and small hand carryables after July 28th will be rigged by Aversa Bros Rigging. Frank Aversa can be reached at aversabros@aol.com 646-879-7218

 

5,000 LBs/Hr. HTST Pasteurize System


  • WCB S/S Plate Press, M/N T13CH-AL-1, S/N 5057, Test PSI 200, Design PSI 150,  Built by UDMC, (2) Dividers, 145 Plates, Includes Flow Diversion Valve, 2” Holding Tube, 16” Tall x 27.5” Dia. S/S Balance Tank, Hinge Lid
  • APV 25 hp Homogenizer, Type 24-3B, S/N 1-01,624, Max. Pressure 210
  • Hot Water Set Mounted on S/S Skid, Nat’l Bd. 88536, Part No. BY526006024001, S/N 789526-01, 29” L x 8 ½” Dia. with SPX WCB 7.5 hp S/S Centrifugal Pump, Aprox. 1 ½” x 1 ½” S/S Clamp Type Head, 3520 RPM, 208-230/460 Volts
  • WCB 10 hp Centrifugal Pump, M/N 2085LV, S/N 384115-05, with Aprox. 1” x 2” Clamp Type S/S Head, with Baldor 3450 RPM Motor, 208-230/460 Volts
  • WCB 1.5 hp Centrifugal Pump, M/N 2065LV, S/N 384116-05, with Aprox. 1” x 1” Clamp Type S/S Head, with Baldor 1755 RPM Motor, 208-230/460 Volts

Cooking Kettles


  • Lee 300 Gal. S/S Kettle, M/N 250U9MS, S/N 19108-1-1, MAWP Jacket 100 PSI @ 338 F, MDMT Jacket -20 F @ 100 PSI, NAT’L BD 8643, Cone Bottom, with Sweep/Scrape Agitation, with 5 hp SEW Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 17” Deep x 72” Dia., Overall Dims.:  71” Tall x 76” Wide
  • Lee 300 Gal. S/S Kettle, Lee S/S Kettle, M/N 250U9MS, S/N 19108-1-3, MAWP Jacket 100 PSI @ 338 F, MDMT Jacket -20 F @ 100 PSI, NAT’L BD 8645, Cone Bottom, with Sweep/Scrape Agitation, with 5 hp SEW Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 17” Deep x 72” Dia., Overall Dims.:  71” Tall x 76” Wide
  • Lee 300 Gal. S/S Kettle, M/N 250U9MS, S/N 19108-1-2, MAWP Jacket 100 PSI @ 338 F, MDMT Jacket -20 F @ 100 PSI, NAT’L BD 8644, Cone Bottom, with Sweep/Scrape Agitation, with 5 hp SEW Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 17” Deep x 72” Dia., Overall Dims.:  71” Tall x 76” Wide
  • Lee 140 Gal. S/S Kettle, M/N 100D7T, S/N 1699A2, Jacket 90 PSI @ 332 F, Test Pressure 140 PSI, NAT’L BD 3692, with Sweep/Scrape Agitation, SEW 1 hp Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.:  31” Deep x 36” Dia., Overall Dims.:  72” Tall x 58” Wide
  • Lee S/S Kettle, M/N 100D9MT. S/N A7863-2, Jacket 90 PSI @ 332 F, Test Pressure 155 PSI, NAT’L BD 2962, with Sweep/Scrape Agitation, SEW 1 hp Agitation Motor, Pressure Sealed Lid, S/S Legs, Overall Dims.:  78” Tall x 62” W
  • Lee S/S Kettle, M/N 100D9MT. S/N A7863-1, Jacket 90 PSI @ 332 F, Test Pressure 155 PSI, NAT’L BD 2961, with Sweep/Scrape Agitation, SEW 1 hp Agitation Motor, Pressure Sealed Lid, S/S Legs, Overall Dims.:  78” Tall x 62” W

Processing & Mixing Tanks 


  • Mueller 1,000 Gal. S/S Fermentation/Processing Tank, Cone Bottom, Sweep/Scrape Agitation, Dual CIP Spray Balls, SEW 11/23 hp Agitator Motor, S/S Legs, with Anderson AJ-300 Chart Recorders. Internal Dims.:  47” Deep x 80” Dia., Overall Dims.:  126” Tall x 86” Wide
  • Mueller 1,000 Gal. S/S Fermentation/Processing Tank, Cone Bottom, Sweep/Scrape Agitation, Dual CIP Spray Balls, SEW 11/23 hp Agitator Motor, S/S Legs, with Anderson AJ-300 Chart Recorder. Internal Dims.: 47” Deep x 80” Dia., Overall Dims.:  126” Tall x 86” Wide
  • Regis 450 Gal. S/S Fermentation/Processing Tank, S/N 9932 Heat Exchange Jacket 50 PSIG, CIP Spray Ball, NORD Agitation Motor, S/S Legs, with Anderson AJ-300 Chart Recorder, Internal Dims.: 29” Deep x 69” Dia., Overall Dims.:  118” Tall x 72” Wide

MIXING TANKS 

  • Walker 600 Gal. Mix Tank, S/N 298, Mounted on S/S Skid, with Anderson AJ-300 Chart Recorder, Overall Dims. 91” Tall x 71” Dia.
  • Walker 600 Gal. Jacketed Mix Tank, Mounted on S/S Legs, with Anderson AJ-300 Chart Recorder, Overall Dims. 91” Tall x 71” Dia.
  • Walker 600 Gal. Mix Tank, Mounted on S/S Skid, with Anderson AJ-300 Chart Recorder, Overall Dims. 91” Tall x 71” Dia.

Breddo Likwifiers


  • Breddo 50 Gal. Likwifier, S/N 263445 2 01037, with Breddo 15 hp Motor, 1765 RPM, 203-230/460 Volts, Internal Dims.: 24” L x 24” W x 23” H, Overall Dims.:  57” Tall x 26” Wide
  • Breddo 50 Gal. Likiwifier, M/N LDT, S/N D32545-2 88173, with Breddo 10 hp Motor, with Allen-Bradley Starter, Internal Dims.:  24” L x 24” W x 23” H, Overall Dims.: 57” Tall x 26” Wide

Horizontal S/S Holding Tanks


  • 4,000 Gal. S/S Horizontal Tank, with CIP Dual Spray Ball, Top Mounted Single Prop Agitation, with Thermometer and Air Valve, Internal Dims.: 12’ 4” (148”) Long x 7’ 10” (94”) Dia.
  • 4,000 Gal. S/S Horizontal Tank, with CIP Dual Spray Ball, Top Mounted Single Prop Agitation, with Thermometer and Air Valve, Internal Dims.: 12’ 4” (148”) Long x 7’ 10” (94”) Dia.

Cup Filling Lines


  • Pack Line 2-Wide Cup Filling Line, Model PXM-4, S/N PL 710045, Currently Set Up to Run Approx 4-1/2″ Dia 10 Oz Cups @ 60 Cups Per Minute, Believed Capable of 70 Cups Per Minute, Previously Filled 10 & 24 Oz Cups, 3-Door S/S Electrical Control Panel Equipped with Allen Bradley 13-Slot SLC 5/03 CPU PLC Controller,Operator Touch Screen Controls, Portable COP Cart Equipped with 7-1/2 HP WCB Centrifugal Pump (3450 RPM) for Parts Cleaning & (2) Operator Platforms
  • Pack Line 2-Wide Cup Filling Line, Model PXG-2, S/N PL 700289, Currently Set Up to Run Approx 4-1/2″ Dia 10 Oz Cups @ 50 Cups Per Minute, Believed Capable of 70 Cups Per Minute, Previously Filled 10, 14 & 28 Oz Cup

Additional Equipment on Processing Room Floor


  • Quadro Ytron 7.5 hp All S/S Shear Pump, S/N Z100 2004, Mounted on S/S Portable Cart
  • (5+) SPX Positive Displacement Pumps
  • (8+) Tri-Clover Centrifugal Pumps
  • Air Valve Manifolds
  • (2) 80″ X 27″ COP Tanks with Centrifugal Pump
  • SPX Tri Blender (Like New)
  • SPX Positive Pump 045/U2 (Like New)

CIP, COP and Chemical Dosing Systems


  • United Dairy Machinery Corporation (UDMC) 3-Tank Skid Mounted Approx 300 Gallon CIP System, All S/S Shell and Tube Heat Exchanger, WCB 20-HP Centrifugal Pump, 3525 RPM, Anderson AJ-300 Onboard Chart Recorder, Associated Valves, Meters, Filters, & Fittings (Approx Tank Dimensions: 38″ D x 65″ H)
  • Jet Spray S/S COP Tank. Approx 78″ L x 24″ W 17″ D, Tri-Clover Centrifugal Pump, Anderson AJ-300 Chart Recorder. Anderson Temp Probe
  • Chemical / Sterilizer Dosing System, Diversey Conductivity Control Unit, DWC-1000 Concentration Computer, Diversey P-6100T, DWC-1000 Cencentration Computer, DiverseyP-6100T.

Stein Continuous Fryer


  • Stein Conveyorized Fryer, Model FB-20, S/N 445 Flow Through Conveyorized Oil Fryer with Oil Reclaim System

Urschel Shlicer


  • Urschel All S/S Slicer, Model G, S/N 695, 2-Cutting Wheels System, 2 HP, 1735 RPM, Portable Unit Mounted on Casters, Previously Used to Slice Vegetables (Onion, Carrot, Garlic, Eggplant & More)

2016 10-Ton Aaon Air Handler


  • 2016 AAON 10-Ton Air Handler, Model RN-010-8-0-EB09-121, S/N 201604-ANEJ13939, 3500 RPM, Design Pressure Low Side 255, Design Prssure High Side 475, 208V, 3 Ph

Air Compressors


  • 2015 Hydrovane Air Compressor, Model HVFR 2B, S/N D145748, Max Pressure 115, 1775 RPM, 200/3/60, WEG 22 kW Motor, 200-230/400- (Installed New 2016)
  • 2015 Beko Drypoint RA Air Dryer, S/N 150015141/15,150 SCFM,203 PSI, 2.3 L
  • Quincy 30 HP Air Compressor, Model 0MT30ACA12SF, 87470

Boiler Room


  • Fulton Vertical Natural Gas Boiler. Model FB-030-A, S/N 99535, 150 MWP, 1035 MD Lbs Steam/Hr, 5/16 SH, 5/8 HD, 90 HS, Gas Supply Pressure 7 IN WC Min & 13 IN Max, 120V/60Hz/1, National Board No 99535
  • Industrial Boiler Company Natural Gas Boiler, Model MIIPFDHI 60 G02, S/N S 6062, 150 MWP, 300 SQ Ft Heating Surface, 5/16″ Shell Thickness
  • Lockwood Products Condensate Accumulation Tank, (2) Condensate Pumps
  • Shell and Tube Heat Exchanger, Approx 72″ Long
  • Shell and Tube Heat Exchanger, Approx 62″ Long
  • (2) Vertical Receivers

Laboratory and Analytical Equipment


  • TA XT Plus Texture Analyzer
  • Ohaus MB45
  • Sartorius MA100
  • Polystat Water Bath
  • (5) Lab fridges

Please Check Back For Complete Equipment List