CEMENT SAWS

• Husqvarna Walk-Behind Concrete Saw (LOCATED IN MONROEVILLE, PA)
• Husqvarna Walk-Behind Concrete Saw (LOCATED IN MONROEVILLE, PA)
• Miller Sturdi-Saw Walk-Behind Concrete Saw(LOCATED IN MONROEVILLE, PA)
• Miller Sturdi-Saw Walk-Behind Concrete Saw(LOCATED IN MONROEVILLE, PA)

MAN LIFTS & MATERIAL LIFTS

• 2010 Genie SuperLift Advantage Material Lift, M/N SLA-20, with Hand Crank, Mounted on Portable Frame (LOCATED IN MONROEVILLE, PA)
• 2010 Genie SuperLift Advantage Material Lift, M/N SLA-20, with Hand Crank, Mounted on Portable Frame (LOCATED IN MONROEVILLE, PA)
• Pittsburgh Heavy Duty 1-Ton Gantry Crane, Weight Capacity: 2,000 lbs., Height Range: 99” to 147-1/2”, Overall Dims. in Current State: Aprox. 110” L x 59” W x 99” H (LOCATED IN MONROEVILLE, PA)
• Pittsburgh Heavy Duty 1-Ton Gantry Crane, Weight Capacity: 2,000 lbs., Height Range: 99” to 147-1/2”, Overall Dims. in Current State: Aprox. 110” L x 59” W x 99” H (LOCATED IN MONROEVILLE, PA)

INSPECTION & LEVELERS

• Pentax Automatic Level, M/N AL-220, S/N 515457, with Hard Case (LOCATED IN MONROEVILLE, PA)
• David White Automatic Level, M/N AL8-26, with Hard Case (LOCATED IN MONROEVILLE, PA)
• Pacific Laser Systems PLS5 Point Laser Level, with Hard Case (LOCATED IN MONROEVILLE, PA)

WELDING & SUPPORT

• Lincoln Electric Idealarc 250 Welder, M/N AC/DC 250, Rated Output 250 AMPs, Mounted on Wheels (LOCATED IN MONROEVILLE, PA)
• Lincoln Arc Welder, M/N IDEALARC 250, S/N AC-46948, Mounted on Wheels (LOCATED IN MONROEVILLE, PA)
• Lincoln Arc Welder, M/N IDEALARC 250, S/N AC-627550, Mounted on Wheels (LOCATED IN MONROEVILLE, PA)
• Dayton 8 hp Medium Duty Generator Set, M/N 3ZC12B, S/N 1401842, 120/240 Volts, 1 Phase, Mounted on Frame & Portable Skate (LOCATED IN MONROEVILLE, PA)
• Campbell Hausefeld 20 Gal. Air Compressor, 125 Max. PSI, 110 Volts, On Wheels (LOCATED IN MONROEVILLE, PA)

AIR COMPRESSORS

• Campbell Hausefeld 20 Gal. Air Compressor, 125 Max. PSI, 110 Volts, On Wheels (LOCATED IN MONROEVILLE, PA)

GANG BOXES

• Large Assortment Including Clam Shell & Upright Boxes
• Portable Cubby Hole Jobsite Box, Opens Up to (2) Section of Cubby Holes, Closed Overall Dins.: Aprox. 48” L x 25” W x 55” H (LOCATED IN MONROEVILLE, PA)
• Portable Cubby Hole Jobsite Box, Opens Up to (2) Section of Cubby Holes, Closed Overall Dins.: Aprox. 48” L x 25” W x 55” H (LOCATED IN MONROEVILLE, PA)
• Portable Cubby Hole Jobsite Box, Opens Up to (2) Section of Cubby Holes, Closed Overall Dins.: Aprox. 48” L x 25” W x 55” H (LOCATED IN MONROEVILLE, PA)
• Rigid 300 Threader, M/N 300, Includes 1/2”-2” Dies, with Job Box, Overall Dims.: Aprox. 48” L x 30” W x 39” H, Mounted on Casters (LOCATED IN MONROEVILLE, PA)

CEMENT SAWS

• Husqvarna Walk-Behind Concrete Saw (LOCATED IN MONROEVILLE, PA)
• Husqvarna Walk-Behind Concrete Saw (LOCATED IN MONROEVILLE, PA)
• Miller Sturdi-Saw Walk-Behind Concrete Saw(LOCATED IN MONROEVILLE, PA)
• Miller Sturdi-Saw Walk-Behind Concrete Saw(LOCATED IN MONROEVILLE, PA)

MAN LIFTS & MATERIAL LIFTS

• 2010 Genie SuperLift Advantage Material Lift, M/N SLA-20, with Hand Crank, Mounted on Portable Frame (LOCATED IN MONROEVILLE, PA)
• 2010 Genie SuperLift Advantage Material Lift, M/N SLA-20, with Hand Crank, Mounted on Portable Frame (LOCATED IN MONROEVILLE, PA)
• Pittsburgh Heavy Duty 1-Ton Gantry Crane, Weight Capacity: 2,000 lbs., Height Range: 99” to 147-1/2”, Overall Dims. in Current State: Aprox. 110” L x 59” W x 99” H (LOCATED IN MONROEVILLE, PA)
• Pittsburgh Heavy Duty 1-Ton Gantry Crane, Weight Capacity: 2,000 lbs., Height Range: 99” to 147-1/2”, Overall Dims. in Current State: Aprox. 110” L x 59” W x 99” H (LOCATED IN MONROEVILLE, PA)

INSPECTION & LEVELERS

• Pentax Automatic Level, M/N AL-220, S/N 515457, with Hard Case (LOCATED IN MONROEVILLE, PA)
• David White Automatic Level, M/N AL8-26, with Hard Case (LOCATED IN MONROEVILLE, PA)
• Pacific Laser Systems PLS5 Point Laser Level, with Hard Case (LOCATED IN MONROEVILLE, PA)

WELDING & SUPPORT

• Lincoln Electric Idealarc 250 Welder, M/N AC/DC 250, Rated Output 250 AMPs, Mounted on Wheels (LOCATED IN MONROEVILLE, PA)
• Lincoln Arc Welder, M/N IDEALARC 250, S/N AC-46948, Mounted on Wheels (LOCATED IN MONROEVILLE, PA)
• Lincoln Arc Welder, M/N IDEALARC 250, S/N AC-627550, Mounted on Wheels (LOCATED IN MONROEVILLE, PA)
• Dayton 8 hp Medium Duty Generator Set, M/N 3ZC12B, S/N 1401842, 120/240 Volts, 1 Phase, Mounted on Frame & Portable Skate (LOCATED IN MONROEVILLE, PA)
• Campbell Hausefeld 20 Gal. Air Compressor, 125 Max. PSI, 110 Volts, On Wheels (LOCATED IN MONROEVILLE, PA)

AIR COMPRESSORS

• Campbell Hausefeld 20 Gal. Air Compressor, 125 Max. PSI, 110 Volts, On Wheels (LOCATED IN MONROEVILLE, PA)

GANG BOXES

• Large Assortment Including Clam Shell & Upright Boxes
• Portable Cubby Hole Jobsite Box, Opens Up to (2) Section of Cubby Holes, Closed Overall Dins.: Aprox. 48” L x 25” W x 55” H (LOCATED IN MONROEVILLE, PA)
• Portable Cubby Hole Jobsite Box, Opens Up to (2) Section of Cubby Holes, Closed Overall Dins.: Aprox. 48” L x 25” W x 55” H (LOCATED IN MONROEVILLE, PA)
• Portable Cubby Hole Jobsite Box, Opens Up to (2) Section of Cubby Holes, Closed Overall Dins.: Aprox. 48” L x 25” W x 55” H (LOCATED IN MONROEVILLE, PA)
• Rigid 300 Threader, M/N 300, Includes 1/2”-2” Dies, with Job Box, Overall Dims.: Aprox. 48” L x 30” W x 39” H, Mounted on Casters (LOCATED IN MONROEVILLE, PA)

Machine Shop Equipment

• MegaPunch Metal Punch, S/N G 13P E518- 359, Maximum Material Capacity 1/4” Thick (LOCATED IN PITTSBURGH, PA)
• GMC Heavy Duty Bending Roll, with (3) S/S Rolls, Aprox. 5 ft. L Rolls, with Foot Control Station (LOCATED IN PITTSBURGH, PA)
• Delta 10” Contractor’s Table Saw, S/N 92L75089, 115 Volts, 1 Phase, with Delta 1-1/2 hp Motor, with Safety Guard (LOCATED IN PITTSBURGH, PA)
• Pedrazzoli Super Brown 350 Cold Saw, with Angle Adjustments & Blade (LOCATED IN PITTSBURGH, PA)
• Delta Circular Chop Saw, S/N 121424, with 3 hp Motor (LOCATED IN PITTSBURGH, PA)
• Shepard Niles Electric Hoist, Type: H25, S/N FNN131, 230 Volts, with 3 hp Motor, with Coffing Hoist 5-Ton Trolley (Note: Does Not Include Cross Beam) (LOCATED IN PITTSBURGH, PA)
• Burr King Vertical Sander, with Dayton 2 hp Motor, 115/ 230 Volts, 1 Phase (LOCATED IN PITTSBURGH, PA)
• Hypertherm PowerMax350 Plasma Cutter, No. 070050, S/N 350-019615, 115 Volts (LOCATED IN PITTSBURGH, PA)

Welding & Hand Tools

• Miller Syncrowave 300 Welder, AC/DC Gas Tungsten Arc or Shielded Metal Arc Welding Power Source, with Coolmate 4 Water Coolant System (LOCATED IN PITTSBURGH, PA)
• Assorted Hand Tools

Material Handling & Rolling Stock

• Datsun 6,000 lb. Sit-Down Propane Forklift, M/N FG006, S/N 6023, Fork Length: Aprox. 130” L, with Double Stage Mast, Engine Model: FG006, with 1,313 Hrs. (LOCATED IN PITTSBURGH, PA)
• 2004 Chevrolet Silverado 2500 HD Pick-Up Truck, VIN #: 1GCHK24U75E153345, with S/S Rack, 2-Seat Cab (LOCATED IN PITTSBURGH, PA)
• (4) Single Wall Steel Dumpster Tote, Overall Dims. Aprox. 4 ft. 5” L x 32” W x 26” Deep (LOCATED IN PITTSBURGH, PA)

Shop Support

• Emglo 25 hp Air Compressor, M/N T, S/N B01196152, with Marathon Motor 1725 RPM, 230/460 Volts, 3 Phase (LOCATED IN PITTSBURGH, PA)
• Double Door Flammable Cabinet, Overall Dims. Aprox. 4-1/2 ft. L x 15” W x 5-1/2 ft. H (LOCATED IN PITTSBURGH, PA)

Assorted Metals

• Lot of Assorted (4) Rails, Aprox. 13 ft. L, with Assorted Sheet Metal & Sheets of Wood (LOCATED IN PITTSBURGH, PA)
• (2) 15-Slot Steel Sheet Metal Rack with Assorted Sheet Metal, Overall Dims. of Rack: Aprox. 6 ft. 8” L x 4 ft. 2” W x 6 ft. 10” H, Metals Include Sheets Aluminum, Some Colored Pieces, Assorted Quantity (LOCATED IN PITTSBURGH, PA)

Oden Tube Filling Line

• Oden In-Line Tube Filler, Model S/FHDMOD, S/N 3280, with (2) Waukesha Cherry Burrell Positive Displacement Pumps

Ross In-line High Shear Mixer

• Ross In-Line High Shear Mixer, 2 Gallon Cap, hydro Tested at 600 PSI, 400 PSI @ 100 Degree F MAWP, MDMT -20 Degree F @ 400 PSI, Portable Skid-Mounted Mixer with Explosion Proof Nema 25 HP 3540/2925 RPM Motor, 230/460 & 190/380 V, Lenz’s AC Type VFD, Type M12300B, 30 HP, 200/240 V Input, 0-200/230 V Output

(5+) Kettles Up to 1,000 Gallons

• Lee 1,000 Gal. S/S Kettle, M/N 1000D9MS, S/N B9422A3, 58 PSI @ 306 F, -20 F @ 58 PSI, with Lenze AC Tech SMV Vector, with General Electric Safety Switch, with Top Mounted Agitation Motor, with S/S Agitation with Side Sweep, with Hinge S/S Lids, Mounted on S/S Legs
• Hamilton 300 Gal. S/S Kettle, Style: SA, S/N B-7113-2, 320 PSI @ 320 F, NAT’L Board Number: 398, with SEW 5.5 hp Top Mounted Motor, with S/S Hinge Lids, with Wall Mounted Safety Switch, Mounted on S/S Legs
• (2) Aprox. 120 Gal. S/S Kettle, M/N LS-100, S/N 920264, MDMT 32 F @ 25 PSI, MAWP 25 PSI @ 267 F, with S/S Agitation with 5 hp S/S Clad Motor, with Lenze AC Tech SMV Vector VFD, with Agitation Framing, with General Electric Safety Switch, Mounted on S/S Legs
• Lee 50 Gal. S/S Kettle, M/N 50 CD9MT, S/N A-7002, Pressure: Internal 25-FV PSI @ 250 F, Jacket 60 PSI @ 308 F 0.75 hp Top Mounted Agitation Motor, with S/S Hinge Lid, with (1) ABB VFDs (NOTE: Agitation Uninstalled & In Kettle–See Photographs)
• Aprox. 10 Gal. S/S Counter Top Kettle, Mounted on HaulMaster Scissor Lift Portable Cart & Stool, Kettle Internal Dims.: Aprox. 22-1/2″ Tall x 13-1/2″ Dia., with Discharge

Air Compressors, Mokon Chillers & Plant Support

• Kaesar 30 HP Air Compressor, Model AS 30 T, S/N 1083, 3555 RPM, 125 PSI, 124 CFM, 208/120 V, 230/133, 460/266, 3 Phase, 60 Hz

Cooking Kettles

• Lee 300 Gal. S/S Kettle, M/N 250U9MS, S/N 19108-1-1, MAWP Jacket 100 PSI @ 338 F, MDMT Jacket -20 F @ 100 PSI, NAT’L BD 8643, Cone Bottom, with Sweep/Scrape Agitation, with 5 hp SEW Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 17” Deep x 72” Dia., Overall Dims.: 71” Tall x 76” Wide
• Lee 300 Gal. S/S Kettle, Lee S/S Kettle, M/N 250U9MS, S/N 19108-1-3, MAWP Jacket 100 PSI @ 338 F, MDMT Jacket -20 F @ 100 PSI, NAT’L BD 8645, Cone Bottom, with Sweep/Scrape Agitation, with 5 hp SEW Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 17” Deep x 72” Dia., Overall Dims.: 71” Tall x 76” Wide
• Lee 300 Gal. S/S Kettle, M/N 250U9MS, S/N 19108-1-2, MAWP Jacket 100 PSI @ 338 F, MDMT Jacket -20 F @ 100 PSI, NAT’L BD 8644, Cone Bottom, with Sweep/Scrape Agitation, with 5 hp SEW Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 17” Deep x 72” Dia., Overall Dims.: 71” Tall x 76” Wide
• Lee 140 Gal. S/S Kettle, M/N 100D7T, S/N 1699A2, Jacket 90 PSI @ 332 F, Test Pressure 140 PSI, NAT’L BD 3692, with Sweep/Scrape Agitation, SEW 1 hp Agitation Motor, Hinge Lid, S/S Legs, Internal Dims.: 31” Deep x 36” Dia., Overall Dims.: 72” Tall x 58” Wide
• Lee S/S Kettle, M/N 100D9MT. S/N A7863-2, Jacket 90 PSI @ 332 F, Test Pressure 155 PSI, NAT’L BD 2962, with Sweep/Scrape Agitation, SEW 1 hp Agitation Motor, Pressure Sealed Lid, S/S Legs, Overall Dims.: 78” Tall x 62” W
• Lee S/S Kettle, M/N 100D9MT. S/N A7863-1, Jacket 90 PSI @ 332 F, Test Pressure 155 PSI, NAT’L BD 2961, with Sweep/Scrape Agitation, SEW 1 hp Agitation Motor, Pressure Sealed Lid, S/S Legs, Overall Dims.: 78” Tall x 62” W

Processing & Mixing Tanks

• Mueller 1,000 Gal. S/S Fermentation/Processing Tank, Cone Bottom, Sweep/Scrape Agitation, Dual CIP Spray Balls, SEW 11/23 hp Agitator Motor, S/S Legs, with Anderson AJ-300 Chart Recorders. Internal Dims.: 47” Deep x 80” Dia., Overall Dims.: 126” Tall x 86” Wide
• Mueller 1,000 Gal. S/S Fermentation/Processing Tank, Cone Bottom, Sweep/Scrape Agitation, Dual CIP Spray Balls, SEW 11/23 hp Agitator Motor, S/S Legs, with Anderson AJ-300 Chart Recorder. Internal Dims.: 47” Deep x 80” Dia., Overall Dims.: 126” Tall x 86” Wide
• Regis 450 Gal. S/S Fermentation/Processing Tank, S/N 9932 Heat Exchange Jacket 50 PSIG, CIP Spray Ball, NORD Agitation Motor, S/S Legs, with Anderson AJ-300 Chart Recorder, Internal Dims.: 29” Deep x 69” Dia., Overall Dims.: 118” Tall x 72” Wide
• MIXING TANKS
• Walker 600 Gal. Mix Tank, S/N 298, Mounted on S/S Skid, with Anderson AJ-300 Chart Recorder, Overall Dims. 91” Tall x 71” Dia.
• Walker 600 Gal. Jacketed Mix Tank, Mounted on S/S Legs, with Anderson AJ-300 Chart Recorder, Overall Dims. 91” Tall x 71” Dia.
• Walker 600 Gal. Mix Tank, Mounted on S/S Skid, with Anderson AJ-300 Chart Recorder, Overall Dims. 91” Tall x 71” Dia.

Breddo Likwifiers

• Breddo 50 Gal. Likwifier, S/N 263445 2 01037, with Breddo 15 hp Motor, 1765 RPM, 203-230/460 Volts, Internal Dims.: 24” L x 24” W x 23” H, Overall Dims.: 57” Tall x 26” Wide
• Breddo 50 Gal. Likiwifier, M/N LDT, S/N D32545-2 88173, with Breddo 10 hp Motor, with Allen-Bradley Starter, Internal Dims.: 24” L x 24” W x 23” H, Overall Dims.: 57” Tall x 26” Wide

Horizontal S/S Holding Tanks

• 4,000 Gal. S/S Horizontal Tank, with CIP Dual Spray Ball, Top Mounted Single Prop Agitation, with Thermometer and Air Valve, Internal Dims.: 12’ 4” (148”) Long x 7’ 10” (94”) Dia.
• 4,000 Gal. S/S Horizontal Tank, with CIP Dual Spray Ball, Top Mounted Single Prop Agitation, with Thermometer and Air Valve, Internal Dims.: 12’ 4” (148”) Long x 7’ 10” (94”) Dia.

Cup Filling Lines

• Pack Line 2-Wide Cup Filling Line, Model PXM-4, S/N PL 710045, Currently Set Up to Run Approx 4-1/2″ Dia 10 Oz Cups @ 60 Cups Per Minute, Believed Capable of 70 Cups Per Minute, Previously Filled 10 & 24 Oz Cups, 3-Door S/S Electrical Control Panel Equipped with Allen Bradley 13-Slot SLC 5/03 CPU PLC Controller,Operator Touch Screen Controls, Portable COP Cart Equipped with 7-1/2 HP WCB Centrifugal Pump (3450 RPM) for Parts Cleaning & (2) Operator Platforms
• Pack Line 2-Wide Cup Filling Line, Model PXG-2, S/N PL 700289, Currently Set Up to Run Approx 4-1/2″ Dia 10 Oz Cups @ 50 Cups Per Minute, Believed Capable of 70 Cups Per Minute, Previously Filled 10, 14 & 28 Oz Cup

Additional Equipment on Processing Room Floor

• Quadro Ytron 7.5 hp All S/S Shear Pump, S/N Z100 2004, Mounted on S/S Portable Cart
• (5+) SPX Positive Displacement Pumps
• (8+) Tri-Clover Centrifugal Pumps
• Air Valve Manifolds
• (2) 80″ X 27″ COP Tanks with Centrifugal Pump
• SPX Tri Blender (Like New)
• SPX Positive Pump 045/U2 (Like New)

CIP, COP and Chemical Dosing Systems

• United Dairy Machinery Corporation (UDMC) 3-Tank Skid Mounted Approx 300 Gallon CIP System, All S/S Shell and Tube Heat Exchanger, WCB 20-HP Centrifugal Pump, 3525 RPM, Anderson AJ-300 Onboard Chart Recorder, Associated Valves, Meters, Filters, & Fittings (Approx Tank Dimensions: 38″ D x 65″ H)
• Jet Spray S/S COP Tank. Approx 78″ L x 24″ W 17″ D, Tri-Clover Centrifugal Pump, Anderson AJ-300 Chart Recorder. Anderson Temp Probe
• Chemical / Sterilizer Dosing System, Diversey Conductivity Control Unit, DWC-1000 Concentration Computer, Diversey P-6100T, DWC-1000 Cencentration Computer, DiverseyP-6100T.

Stein Continuous Fryer

Stein Conveyorized Fryer, Model FB-20, S/N 445 Flow Through Conveyorized Oil Fryer with Oil Reclaim System

Urschel Shlicer

Urschel All S/S Slicer, Model G, S/N 695, 2-Cutting Wheels System, 2 HP, 1735 RPM, Portable Unit Mounted on Casters, Previously Used to Slice Vegetables (Onion, Carrot, Garlic, Eggplant & More)

2016 10-Ton Aaon Air Handler

• 2016 AAON 10-Ton Air Handler, Model RN-010-8-0-EB09-121, S/N 201604-ANEJ13939, 3500 RPM, Design Pressure Low Side 255, Design Prssure High Side 475, 208V, 3 Ph

Air Compressors

• 2015 Hydrovane Air Compressor, Model HVFR 2B, S/N D145748, Max Pressure 115, 1775 RPM, 200/3/60, WEG 22 kW Motor, 200-230/400- (Installed New 2016)
• 2015 Beko Drypoint RA Air Dryer, S/N 150015141/15,150 SCFM,203 PSI, 2.3 L
• Quincy 30 HP Air Compressor, Model 0MT30ACA12SF, 87470

Boiler Room

• Fulton Vertical Natural Gas Boiler. Model FB-030-A, S/N 99535, 150 MWP, 1035 MD Lbs Steam/Hr, 5/16 SH, 5/8 HD, 90 HS, Gas Supply Pressure 7 IN WC Min & 13 IN Max, 120V/60Hz/1, National Board No 99535
• Industrial Boiler Company Natural Gas Boiler, Model MIIPFDHI 60 G02, S/N S 6062, 150 MWP, 300 SQ Ft Heating Surface, 5/16″ Shell Thickness
• Lockwood Products Condensate Accumulation Tank, (2) Condensate Pumps
• Shell and Tube Heat Exchanger, Approx 72″ Long
• Shell and Tube Heat Exchanger, Approx 62″ Long
• (2) Vertical Receivers

Laboratory and Analytical Equipment

• TA XT Plus Texture Analyzer
• Ohaus MB45
• Sartorius MA100
• Polystat Water Bath
• (5) Lab fridges

MARGARINE PROCESSING EQUIPMENT

• (9) SCRAPED SURFACE HEAT EXCHANGERS (SSHE) (PERFECTORS)
• Gerstenberg 4-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+1+1+1) X92R, S/N 13.037, Ammonia Cooled
• Gerstenberg 4-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+1+1+1) X92R, S/N 12.799, Ammonia Cooled
• Gerstenberg 4-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+1+1+1) X92R, S/N 12.7913.0399, Ammonia Cooled
• Gerstenberg 4-Barrel Scraped Surface Heat Exchanger, Type Perfector (3+1) X92R, S/N 1179.002, Ammonia Cooler
• Gerstenberg 4-Barrel Scraped Surface Heat Exchanger, Type Perfector (3+1) X92R, S/N 12.797, Ammonia Cooled
• Gerstenberg 3-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+2) X92R, S/N 13.036, Ammonia Cooled
• Gerstenberg 4-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+1+1+1) X92R, S/N 1331.001, Ammonia Cooled
• Gerstenberg 3-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+2) X92R, S/N 12.798, Ammonia Cooled
• Gerstenberg 6-Barrel Scraped Surface Heat Exchanger, Type Perfector (1+1+1+1+1+1) X92R, S/N 1181.001, Ammonia Cooled

(5) PIN ROTORS

• Gerstenberg 2-Barrel S/S Pin Rotor, Type Pin Rotor Machine 2X85LTR, S/N 1177.00
• Gerstenberg Single Barrel S/S Pin Rotor, Model 1X85LTR, S/N 1056.003D
• Gerstenberg Single Barrel S/S Pin Rotor, Type Pin Rotor Machine 1X85LTR, S/N 1056.003C
• Gerstenberg Single Barrel S/S Pin Rotor, Type Pin Rotor Machine 1X85LTR, S/N 1179.004
• Gerstenberg Single Barrel S/S Pin Rotor, Type Pin Rotor Machine 1X85LTR, S/N 1056.003C

OTHER BUTTER EQUIPMENT

• Schroeder Kombinator, Type CIK336-1400, Work #113639-155830, with 55 kw
• Schroeder & Co., Work #30-403 (Inverter #1)

WHIPPERS

• 2) S/S Whippers with 1-1/2”, Variable Speed Drive, Mounted on S/S Rack (#14 and #15)

PROCESSORS

• Aprox. 1,000 (60” H x 72” W) Dome-Top S/S Processor with Stainless Bottom, Jacketed (Jacket Not Hooked Up), WCB Air Valve, Lightnin Agitator, Sprayballs, (Tank #6)
• Aprox. 1,000 Gal. (71” W x 68” Deep) Dome Top Cone Bottom Processor, with Lightnin Agitators, 6-Prop Blade, Dual Sprayball, WCB Air Valves, (Holding Tank #13)
• Aprox. 900 Gal. (73” W x 52” Deep) Dome Top Cone Bottom Processor, with Lightnin Agitators, 6-Prop Blade, Dual Sprayball, WCB Air Valves, (Holding Tank #12)
• Aprox. 900 Gal. (71” W x 53” Deep) S/S Processor with (2) Fristam Aprox. 10 hp Centrifugal Pump, Lightnin Agitator, 6-Prop Blade, Dual Sprayballs, Mounted on Load Cells, Stainless Funnel and Operators Platform (Run Tank #3)
• WCB Aprox. 800 Gal. (71” Deep x 59” W) S/S Processor, S/N E-220-88-1 with Lightnin Agitator, 6-Prop Blade, Dual Sprayballs, WCB Air Valves, Mounted on Load Cells, (3) Fristam Aprox. 10 hp Centrifugal Pumps and S/S Funnel
• Aprox. 800 Gal. (70” W x 51” Deep) Dome Top Processor, with Lightnin Agitators, 6-Prop Blade, Dual Sprayball, WCB Air Valves, (Holding Tank #11)
• Aprox. 600 Gal. (56” W x 58” H) Dome-Top S/S Processor with Lightnin Agitator, 6-Prop Blade Mixer, Dual Sprayballs, Stainless Bottom, Flow Meter, WCB Air Valve, (Jacket Not Hooked Up), (Mix Tank #5)
• Cherry Burrell Aprox. 500 Gal. (54” W x 51” Deep) S/S Processor, S/N 87-E-166 with 2014 SPX Lightnin Agitator, 6-Prop Blade, WCB Air Valves, Dual Sprayballs and Centrifugal Pump (Run Tank Brine)

SINGLE WALL TANK

• Approx. 300 Gal. (60” H x 38” W) Single Shell Vertical S/S Tank (Luctic Acid)

MILK, OIL, BRINE, MARGARINE BLENDING SYSTEM

• Aprox. 800 Gal. (59” W x 71” Deep) S/S Processor, S/N E-56788, with WCB Air Valves, Sprayballs, Centrifugal Pump, 6-Prop Blade, (Tank #12)
• (4) WCB 600 Gal. S/S Processors (Aprox. 50” W x 71” Deep) , S/N E-7790; S/N E-565-88; S/N E-56188; S/N E-563-88 with WCB Air Valves, Sprayballs, Centrifugal Pump, 6-Prop Blade, (Tank #10, #16, #15, #13)
• (8) S/S Processors including (2) WCB 600 Gal., S/N E-060-97 (Churn #8) and S/N E-059-97 (Churn #7) and (6) Mueller Aprox. 500 Gal (51” W x 58” Deep),(Churn #6, #5, #4, #2, #1), All with Lightnin Agitators, 6-Prop Blades, Air Valves, Parker Inline Filter, WCB 25 hp Centrifugal Pumps – (2) S/S Clad, Mounted on Load Cells

S/S PLATE PRESS

• Cherry Burrell S/S Plate Press, Model 435-SB-2, S/N 216 with (1) Divider

VOTATOR HIGH PRESSURE PUMP

• Votator 15 hp 3-Piston High Pressure Pump with Variable Speed Drive

MELTING / REMELTING TANK ROOM

• (2) 2009 Walker 500 Gal. S/S Processors, Model PZ, S/N WEP-7655-1 and S/N WEP-76552-2 with 316 Interior, WCB Air Valves, Bottom Sweep Agitator, Dual Sprayballs, Mounted on Load Cells and Tri-Clover Aprox. 7-1/2 hp Centrifugal Pump, (Remelt Holding Tank #1 and #2)
• (2) WCB Aprox. 350 Gal (54” W x 38” Deep) S/S Hinged Lid Processors, S/N E178-88 and S/N E172-88 with Air Valves, Steam Jacket, Fristam Aprox. 2 hp Centrifugal Pumps, (No Agitators) (1988)

MILK BLENDING SYSTEM

• (2) Aprox. 3,000 Gal. (102” W x 92” H) Dome-Top S/S Processors with Agitators, Sprayballs, (2) Fristam Centrifugal Pumps and Rosemount Meters (Holding Tank #1 and #2)
• (2) Feldmeier Aprox. 2,000 Gal @ 2-Compartment (Aprox. 75” L x 73” W x 92” Deep) Rectangular S/S Tanks, S/N E-093-2 and S/N E-092-02, with Agitators, Jacketed, 9-Prop Agitators, Dual Sprayballs, Butterfly Valves, WCB Air Valves, Rosemount Meters and (2) Fristam Centrifugal Pumps, (Tank #14, #8, #7 and #6) (Aqueous Tank)
• (3) Aprox. 2,000 Gal. (82” W x 90” H) Dome-Top S/S Processors with Agitators, Sprayballs, Fristam Centrifugal Pumps and Rosemount Meters (Holding Tank #3, #4 and #5)
• (2) 2004 Feldmeier Aprox. 900 Gal. (60” H x 67” W) Dome-Top S/S Processors, S/N E-488-04 and S/N E-487-04 with Dual Sprayballs, 6-Prop Blade, Agitator and Operators Platform (Mix Tank #10 and #9)

(4) TRI BLENDERS

• 2) Tri-Clover 30 hp Tri-Blenders, Model 74329MDG/MBV-S, S/N 537850-02 and S/N 5378050-01 with Funnels
• (2) Tri-Clover Tri-Blenders – 30 hp (1) Painted Motor and (1) Stainless Clad Motor

S/S KETTLE

• Feldmeier Aprox. 130 Gal (36” W x 31” Deep) Hinged Lid S/S Kettle with (4) WCB Air Valves, Waukesha Positive Displacement Pump, Model 060 with 2-1/2” Clamp Type Head (Oil Inversion Pot)

SHELL & TUBULAR HEAT EXCHANGER

• Het Stempel B.V. Lofator Aprox. 11 ft. L Skid-Mounted S/S Shell & Tube Heat Exchanger with (3) 7-1/2 Centrifugal Pumps, Actuated Air Valves, (2) S/S Shell and Tube Heat Exchangers

CIP SYSTEMS

• 4-Tank Skid Mounted S/S CIP System with (4) Aprox. 48” H x 32” Dia., (4) S/S Shell and Tube Heat Exchangers, WCB Air Valves, Foxboro Flow Meters, S/S Filter, 8-Valve and 12-Valve 2-1/2” and 4” Air Valve Clusters, (4) Fristam Centrifugal Pumps, Condensate System with Controls, Operators Platform and Chemical Handling System
• (4) Cherry Burrell Dome-Top S/S CIP Tanks – (1) Aprox. 3,000 Gal., S/N 3000CVF883093 (Aprox. 175” H x 72” Dia.); (2) Aprox. 124” H x 72” Dia., S/N 88-E-143-1 and S/N 88-E-143-2 and (1) Aprox. 3,500 Gal., S/N 3500CVF883092 (Aprox. 17 ft. H x 72” Dia.), All with Bottom Side Access Doors and S/S Legs
• (2) 2-Tank Skid-Mounted CIP Systems with (2) WCB 490 Gal (82” H x 42” W) S/S Tanks including Fristam 15 hp Centrifugal Pumps, WCB Air Valves, Inline Filters, Rosemount Flow Meters, S/S Shell and Tube Heat Exchangers with Chemical Handling System
• 2-Compartment S/S CIP System – Each with Aprox. 500 Gal (48” W x 54” Deep x 45” H) S/S Tanks, S/S Shell and Tube Heat Exchanger, WCB Air Valves, Inline Filter and Fristam Centrifugal Pump

(7) SOFT BUTTER/MARGARINE TUB FILLING, CLOSING &PACKAGING LINES

• LINE #1: Packaging Technology/Auto Prod 4-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 3-1/2” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with PanelView Plus 1500 Touchpad Display and Operators Platform
• Aprox. 272” L Alliance Industrial S/S Product Conveyor Section with 3-1/4” W to 4-1/2” W Table Top Chain and Operators Work StationAprox. 112” L Alliance Industrial S/S Product Conveyor Section with 4-1/2” W Chain
• Sabel Automatic S/S Case Packer, Model SE, S/N 807 with Laner Conveyor, PLC Controls, Verne Industries Touchpad Display with Digital Read-Out, Model 2015 and Onboard Bel 151 Case Sealer
• Line Control Panel with Allen Bradley PLC Controls
• LINE #6: Packaging Technology/Auto Prod 4-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 4-1/2” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with Panel View Plus 1500 Touchpad Display and Operators Platform
• Aprox. 43” L Arrowhead S/S Product Conveyor Section with 3-1/4” W Table Top Chain and Operators Work Station
• Schneider S/S Case Packer, with Laner Conveyor, Allen Bradley PLC Controls, PanelView 1000 Touchpad Display (Machine Dimensions Aprox. 44 ft. L x 117” W) (1990)
• Bel 150 Adjustable Case Sealer and Marsh Coder
• Line Control Panel with Allen Bradley PLC Controls
• LINE #10: Packaging Technology/Auto Prod 4-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 5-3/4” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with PanelView Plus 1500 Touchpad Display and Operators Platform
• Product Conveyor
• Schneider S/S Case Packer with Laner, Allen Bradley PLC Controls, (2) Allen Bradley PanelView 1000 Touchpad Display, Aprox. Dimensions 28 ft. L x 11 ft. W and Marsh Unicorn Coder
• Schneider Aprox. 138” H All S/S Case Elevator, Model EL-45, S/N 1774-0799
• Line Control Panel with Allen Bradley PLC Controls
• LINE #4: Packaging Technology/Auto Prod 3-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 6” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with PanelView Plus 1500 Touchpad Display and Operators Platform
• Aprox. 22 ft. L S/S Product Conveyor with 4-1/2” W Chain, Single into Dual Lane including Operators Work Station
• Sabel S/S Automatic Case Packer, Model SE, S/N 809 with Onboard Bell 151 Case Sealer, Operators Platform and Marsh Unicorn Coder
• Line Control Panel with Allen Bradley PLC Controls
• LINE #2: Packaging Technology/AutoProd 2-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 6-3/4” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with PanelView Plus 1500 Touchpad Display and Operators Platform
• Aprox. 19 ft. Dual Lane Product Conveyor with 4-1/2” W Chain including Operators Work Station
• Sabel Automatic S/S Case Packer, Model SE, S/N 810 with Bel 151 Case Sealer and Marsh Coder
• Line Control Panel with Allen Bradley PLC Controls
• LINE #3: Packaging Technology/Auto Prod 4-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 4-1/2” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with PanelView Plus 1500 Touchpad Display and Operators Platform
• Aprox. 34 ft. Arrowhead S/S Conveyor with 4-1/2” Chain
• Line Control Panel with Allen Bradley PLC Controls
• ADDITIONAL LINE: Packaging Technology/Auto Prod 4-Lane Butter/Margarine Tub Filling and Closing Machine including: Fill Tec Upgraded Servo Filler Conversion, Set-Up with 5-7/8” Change Parts, Cup Feeder, Benhil Tamper Evident Sealer, Lid Inserter, Allen Bradley PLC Controls with PanelView Plus 1500 Touchpad Display and Operators Platform
• Aprox. 26 ft. L Single into Dual Lane Conveyor with 4-1/2” W Chain
• Sabel Automatic Case Packer, Model SE-15, S/N 1000 with Bel 250 Case Sealer and Marsh Unicorn Coder
• Line Control Panel with Allen Bradley PLC Controls

PALLETIZER SYSTEMS & WRAPER

• Litton/Von Gal High to Low Level Palletizer, Model SPLX-MKII-4840-RH-(F)-RAPD, S/N 2465 with Allen Bradley 5/40E PLC Controls, 460 V, 3 Phase (Palletizer #10)
• Litton/Von Gal High to Low Level Palletizer, Model SPLX-MKII-5-1840-LH-(F)-RAPD with Allen Bradley 5/80 PLC Controls, 460 V, 3 Phase
• Production Automation High to Low Level Multiple UPC Palletizer System, S/N 1493, S/N 2200-1, S/N 2200-02, S/N 2200-03 and S/N 2200-4with Pallet Stacker, Conveyor Beds, Safety Cages, Allen Bradley 5/11 PLC Controls and (4) PanelView Plus 1000 Touchpad Displays, 480 V, 3 Phase (Palletizer #8)
• ITM Mima 117” H Cobra XL Stretch Wrapper, Model XLCR, S/N 02040304 with Infeed and Outfeed Conveyor, Allen Bradley MicroLogix 1000 PLC Controls and PanelView 300 Micro Touchpad Display, 230 V

TANK FARM (VEGETABLE OIL STORAGE)

• (6) Outside Oil Storage Tanks
• (5) Aprox. 23,000 Gal. Carbon Steel Oil Storage Tanks (Aprox. 28 ft. H x 12 ft. Dia.) with Bottom Compartment with Electric Heaters, Side Mount Access Doors, Level Sensors, Valves, Heat Trace, All with Viking Centrifugal Pumps (4 of the 5 Tanks are Insulated) includes Catwalk System and Stairs (Tanks #BS1, #BS2, #BS3, #BS4 and #HT9)
• Standard Boiler & Tank Co. Aprox. 14,000 Gal. Insulated S/S Oil Storage Tank (Aprox. 288” L x 120” Dia.) with Lightnin Vertical Agitator, Heat Trace, Level Sensor, Valves, Side Mount Access Door
• Tanker & Rail Delivery System
• Related Pumps Valves, Filters, Flow Meters & Piping
• (10) Inside Vegetable Oil Holding Tanks
• (2) Aprox. 14,000 Gal. Horizontal Carbon Steel Vegetable Oil Holding Tanks (Aprox. 308” L x 116” W) with Lightnin 3.5 hp Side Mount Agitators, Rear Access Doors, Valves, Level Sensors and Thermometers (Tank #7 and #8)
• prox. 10,000 Gal. Horizontal Carbon Steel Vegetable Oil Holding Tank (Aprox. 324” L x 96” W) with Lightnin 1.74 hp Agitator, Top and Rear Side Mount Access Doors, Valves, Level Sensor and Thermometer (Tank #1)
• (5) Aprox. 8,000 Gal. Horizontal Carbon Steel Vegetable Oil Holding Tanks (Aprox. 300” L x 90” W) with Lightnin 1.74 hp Agitators, Top and Rear Side Mount Access Doors, Valves, Level Sensors and Thermometers (Tank #2, #3, #4, #5 and #6),
• (2) Modern 3,600 Gal. Vertical Carbon Steel Vegetable Oil Holding Tanks, S/N S-1311 (Aprox. 100” W x 108” H) with Lightnin Vertical Agitators, Valves, Level Sensors, Side Mount Access Doors (Tank #10 and #11)
• Vegetable Oil Blending
• (2) Modern 7,000 Gal. Carbon Steel Oil Blending Tanks, S/N S-1437 (Aprox. 132” W x 120” H) with Lightnin Vertical Agitators, Side Mounted Access Doors, Valves and Level Sensors (Tank #12 and #13)
• (2) Modern 3,000 Gal. Cone Bottom Carbon Steel Vertical Oil Blending Tanks, S/N 5-1310 (Aprox. 63” H x 108” W with Lightnin Vertical Agitators, Level Sensors, Valves, Side Mount Access Doors, Mounted on Load Cells (Tank #OB1 and #OB2)
• Vegetable Oil Emulsifier Mix System includes Aprox. 300 Gal. Jacketed S/S Mix Tank (Aprox. 50” W x 45” Deep) with Lightnin 1 hp 3-Prop Vertical Agitator, Hinged Lid, Mounted on Load Cells, S/S Operators Platform, Viking 10 hp Centrifugal Pump, Filters, Valves and Level Sensors
• Vegetable Oil Tank Auxiliary Equipment
• Late Model Viking 25 hp Centrifugal Pump, Model 04125 with 4” x 5” Flanged Head (Painted Blue)
• Viking 20 hp Centrifugal Pump (Located Outside)
• (2) Viking 15 hp Centrifugal Pumps (Located Outside Tank Farm)
• (13) Viking 10 hp Centrifugal Pumps with 3” x 3-1/4” Flanged Heads – (1) Located Outside Near Tank Farm)
• (4) Viking 3 hp Centrifugal Pumps
• 15 hp Centrifugal Pump
• (2) R P Products 30” H x 9” Dia. Inline Filters
• 100’s Feet Installed Carbon Steel and S/S Piping Throughout Vegetable Receiving Side – Most 3-1/2”, Some Pneumatic Gate Valves, Standard Gate Valves, Ball Valves and (2) S/S Solenoid Control Panels
• (4) ITT Standard Shell and Tube Heat Exchangers – (1) S/N 96B10206-02 – Aprox. 20” W x 11 ft. 5” L; (1) S/N 96B10206-01 – Aprox. 24” W x 12 ft. L; (1) S/N 96B10206-03 — Aprox. 18” W x 11 ft. 6” L and (1) Aprox. 10” W x 8 ft. 9” L, Mounted on Rack includes Control Valves and Related Piping,
• Barrel Handling System with Crane System including Dayton ½-Ton Hoist, Barrel Lifter Attachment, (3) Sections of Skate Conveyor and Aprox. 4 ft. x 44” W S/S Scissorlift Platform
• Heat Trace Controller
• Oil Waste System
• Lake Process Systems Aprox. 2,500 Gal. Dome-Top S/S Hot Water Tank, Model 2000, S/N 19062 with Aprox.15 hp Circulating Pump (Tank Dimensions Aprox. 91” H x 90” Dia.)
• Ambar Aprox. 60 Gal. Oil Skimmer Tank, Model C1, S/N 00062 (Tank Dimension Aprox. 32” H x 24” Dia.)
• Aprox. 4,000 Gal. Rectangular S/S Insulated Waste Vegetable Oil Storage Tank with Viking Aprox. 10 hp Centrifugal Pump (Tank Dimensions Aprox. 64” W x 99” H x 148” L)
• Oil Pit Waste Handling System

S/S SANITARY GRADE PUMPS, VALVES & PIPING

• Centrifugal Pumps: Over (25) Fristam & Other Centrifugal Pumps
• Positive Displacement Pumps: Waukesha Positive Displacement Pump, Model 060 with 2-1/2” Clamp Type Head
• S/S Piping: 1,000’s of Feet of 1 ½” to 3” Installed S/S Piping Throughout Facility Including Floverter Stations, Clamps & Fittings
• Air Valve Clusters: 20-Valve WCB 2” S/S Air Valve Cluster with Solenoid Control Panel; 12-Valve WCB 2” Air Valve Cluster & More
• Air Valves: Over (50) S/S Air Valves by Tri-Clover, WCB & Others
• Flow Meters: (5) Micro-Motion S/S Flow Meters – (1) 1” and (4) 2”
• Inline S/S Filters: Variety of S/S In-Line Filters
• Heat Exchangers: S/S Shell and Tube Heat Exchanger

AMMONIA (NH3) REFRIGERATION SYSTEM

• Ammonia Compressors
• 2013 GEA Aprox. 500 hp Screw Ammonia Compressor, Model 400GLX, GEA Project #000297-003-1-01-01 with GEA Omni Touchpad Display, Benshaw Starter (Compressor #2)
• FES 600 hp Screw Ammonia Compressor, Screw Head Model/S/N 250MUD-LX2532328 with FES Touchpad Controller (Compressor #1)
• FES 500 hp Screw Ammonia Compressor, FES Screw Head, Model/S/N 23MAB10701V with FES Touchpad Controller (Compressor #5)
• FES 500 hp Screw Ammonia Compressor, Mycom Screw Head, Model 250SUD2.6, S/N 2552954 with FES Touchpad Controller (Compressor #3)
• FES 250 hp Screw Ammonia Compressor, FES Head Model 23LB, S/N AV10367V with FES Touchpad Display (Booster #4)
• FES 250 hp Screw Ammonia Compressor, FES Screw Head Model 575B-LE, S/N 2512442 with FES Touchpad Display (Booster #2)
• FES 200 hp Screw Ammonia Compressor, Dunham Bush Screw Head Model 350-B, S/N 4462 with FES Touchpad Display (Booster #6)
• (2) Spare Ammonia Compressor Heads – (1) Rebuilt including: Mayekawa Head (Rebuilt) and Mycom Head
• Ammonia Aux. System
• Hansen Auto Purger, Model AP-16, S/N L1700
• Frick 8 ft. L x 36” Dia. Horizontal Receiver, S/N 87233 with Circulating Pump (M & R)
• Aprox. 6 ft. W x 20 ft. L Horizontal Ammonia Receiver
• Phillips Pumper Drum, S/N 4704, 250 psi @ 650 Degree F (M & R)
• Phillips Low-Side Pumper Drum, Model P34-39-03, S/N 4653
• Jordan Equipment Ammonia Trap, Model VA-30-84, S/N 98-2821, 250 psi @ 200 Degree F (Office Building Trap)
• Jordan Equipment High-Side Trap, Model VA48-8, S/N 96-1793 with Drum Pump (High Side)
• E.L. Nickell Intercooler, S/N 36828
• Frick Low-Side Trap, S/N ST186
• Oil Evacuation Pump
• FES Micro III Ammonia Systems Controls, S/N 9A140101 with (3) Winters Ammonia Gauges, (3) Ashcroft Gauges and (3) Mercoid Gauges
• Manning Systems Ammonia Leak Detection System with MSA Air Packs
• Evaporative Condenser
• 2011 Evapco Single Fan Evaporative Condenser, Model ATC-647E-1G, S/N 11-412096
• Evapco Single Fan Evaporative Condenser, Model ATC-781B, SN 5-130726
• BAC 6-Fan Evaporative Condenser, Model C250-4-M, S/N 93100808 with Late Model Rockwell VFD
• BAC Single Fan Evaporative Condenser, Model VXMC-N235, S/N 84-6044
• BAC Cooling Tower, Model CXY-481DR, S/N U000291901
• FES Condenser Controller
• 40 Degree – Cooler Evaporator / Blowers
• (2) Krack 5-Fan Ammonia Evaporator Blowers
• (12) Krack 6-Fan Ammonia Evaporator Blowers

BRINE COOLING SYSTEM

• 2001 IsoTherm Skid-Mounted Aprox. 17 ft. L x 36” W Shell and Tube Ammonia Heat Exchanger, Model ZSO-3216DE, S/N 01077X, Shell MAWP 250 psi @ 200 Degree F, (2) MAWP 150 psi @ 200 Degree F with Controls, Recirculating System with (2) Circulating Pumps and Chemical Handling System
• Owens Corning Aprox. 15,254 Gal. Vertical Fiberglass Brine Tank with Bottom Access Door, (3) Centrifugal Pumps and S/S Filter

PLATE HEAT EXCHANGER

• 2014 Alfa Laval Plate Heat Exchanger, Model M10-BWFD, S/N 30116-89700 with Painted Frame and Danfoss Controls

BOILER ROOM

• Cleaver Brooks 250 hp Boiler, Model CB200-250, S/N L-5811, Natural Gas, Input BTU 10461000 (Boiler #1)
• Cleaver Brooks 250 hp Boiler, Model CB200-250, S/N L-91835, Natural Gas, Input BTU 10461000 (Boiler #2)
• CBW Air Scrubber (Located on Roof)
• Cleaver Brooks Boiler Deaeration System with (3) Grundfoss Pumps, Endress+Hauser Flow Meters and Chemical Handling System
• Additional Items in Boiler Room include: Pulsa Feeder Boiler Water Treatment Controller, Vision Series
• (2) Kinetico Water Softeners, Model CP213SOD with Salt Tanks
• Yokogawa Display and Anderson AV9000 Chart Recorder
• Additional Boiler
• (2) Patterson Kelley/Harsco Thermific Gas-Fired Boilers, Model N-700 (Small)
• No. 2 Fuel Oil Tank
• Aprox. 3,500 Gal. Above Ground Boiler No. 2 Fuel Oil Carbon Steel Tank (Tank Dimensions Aprox. 7 ft. W x 13 ft. H)