Fluid Heating Systems

Stein/Fulton Coil Design Thermal Fluid Heater, M/N ST-1260-F, S/N 3039-C, with (2) additional Pump & Valve Skid (LOCATED IN FT. ATKINSON, WI)

GTS Fluid Circulation Skid, M/N V10/40, Volume 208 Gal./Ltr., Heat Capacity 1000000, Min. Flow 209 GPM (LOCATED IN FT. ATKINSON, WI)

Shaker Decks

Key S/S Shaker Deck, S/N 429970-1, S/N 01-68339, with Aprox. 150″ L Deck, Aprox. 20″ W, with S/S Feet (LOCATED IN FT. ATKINSON, WI)

FRS S/S Shaker Deck, M/N 7000, S/N 2167, 920 RPM, Stroke 6/16″, with (2) S/S Clad Motors, Total Length Aprox. 7 ft., with Aprox. 26″ W Deck, Mounted on S/S Portable Frame (LOCATED IN FT. ATKINSON, WI)

Nitrogen Tunnel

S/S Nitrogen Tunnel, Aprox. 30 ft. L, with Aprox. 36″ W S/S Belt, with Aprox. 3-1/4″ Clearance, On S/S Legs (LOCATED IN FT. ATKINSON, WI)

Conveyors & Related

S/S Incline Conveyor/Hopper, Internal Hopper Dims.: Aprox. 91″ L x 66″ W x 42″ Deep, Conveyor to Floor: Aprox. 102″ H, Cleat Spacing Aprox. 6″, Mounted on S/S Frame (LOCATED IN FT. ATKINSON, WI)

FRS S/S Incline Conveyor, M/N 6000, S/N 2062F, Belt to Floor Aprox. 53″ Tall, with S/S Clad Drive, Space of Cleats 3-5/8″, Mounted on S/S Portable Frame (LOCATED IN FT. ATKINSON, WI)

Straight Section of S/S Conveyor, Aprox. 102″ L x 17-1/2″ W Plastic Belt, Belt to Floor Aprox. 63″ H, Hydraulically Driven, Mounted on S/S Frame (LOCATED IN FT. ATKINSON, WI)

Food Processing Systems Inc. S/S Incline Conveyor, M/N 4000, S/N 2167 Q1B, with Leeson 0.75/0.5 hp S/S Clad Drive, with (2) Sets of Cleats, Cleat Spacing Aprox. 6″ W, Overall Length: Aprox. 16 ft. L, Belt to Floor Aprox. 62″ H, Mounted on S/S Frame (LOCATED IN FT. ATKINSON, WI)

S/S Incline Conveyor, with Aprox. 17-1/2″ W Plastic Belt, with Sterling 1 hp S/S Clad Motor, Belt to Floor Aprox. 48″ H (LOCATED IN FT. ATKINSON, WI)

2-Tier Straight Sections of S/S Conveyor, 1-Pce. Aprox. 20 ft. L with Aprox. 24″ W Plastic Belt, with 1-Pce. Aprox. 14 ft. L Straight Section of S/S Conveyor, with S/S Platforms (LOCATED IN FT. ATKINSON, WI)

Allen S/S Shaker Deck, Aprox. 11 ft. L x 29-1/2″ W Deck, Mounted on S/S Portable Frame (LOCATED IN FT. ATKINSON, WI)

S/S Incline Conveyor, with Aprox. 201″ L x 18″ W Plastic Belt, Belt to Floor Aprox. 73″ H, Mounted on S/S Frame (LOCATED IN FT. ATKINSON, WI)

S/S Straight Section of Conveyor, Aprox. 171″ L with Aprox. 38″ W Plastic Belt, Belt to Floor Aprox. 48″ H, Mounted on S/S Portable Frame (LOCATED IN FT. ATKINSON, WI)

S/S Incline Metering Hopper, with Aprox. 16″ W Plastic Belt, with Cleat, Cleat Spacing Aprox. 6″ W (LOCATED IN FT. ATKINSON, WI)

Incline S/S Conveyor, Aprox. 11 ft. L, with Aprox. 24″ W Plastic Belt, with S/S Frame (LOCATED IN FT. ATKINSON, WI)

S/S Incline Conveyor, Belt to Floor: Aprox. 78″ H, with Cleats, Aprox. 12″ W Cleat Spacing, with S/S Frame (LOCATED IN FT. ATKINSON, WI)

Misc. Highlights & Veggy Handling

S/S Onion Peeler, with Bottom Mounted S/S Auger, with S/S Platform (LOCATED IN FT. ATKINSON, WI)

30 hp Exhaust Fan, with Sterling 1175 RPM Motor, 230/460 Volts, 3 Phase (LOCATED IN FT. ATKINSON, WI)

(2) Top & Bottom Case Sealer (NOTE: Missing Tape Heads) (LOCATED IN FT. ATKINSON, WI)

Jacketed Cookers

Scott Equipment S/S Jacketed Cooker, M/N MMX361355, S/N 9905099, with 150 PSI @ 400 F Jacket, with 20 hp Baldor Motor, Aprox. 15 ft. L, Mounted on S/S Frame (LOCATED IN OTHELLO, WA)

Scott Equipment S/S Jacketed Cooker, M/N MMX361355, S/N 1999, with 150 PSI @ 400 F Jacket, with 20 hp Baldor Motor, Aprox. 15 ft. L, Mounted on S/S Frame (LOCATED IN OTHELLO, WA)

Shaker Decks

NEW Midwestern Shaker Deck, with 3/4 hp Motor TEFC, S/N 0707-202R, 230/460 Volts, 3 Phase (LOCATED IN OTHELLO, WA)

(3) Key S/S Shaker Deck, Aprox. 11 ft. L, with Aprox. 4 ft. Deck, with Bottom Mounted Motor (LOCATED IN OTHELLO, WA)

Key Iso-Flo S/S Shaker Deck, with Aprox. 176″ L x 24″ W S/S Deck, Mounted on S/S Frame (LOCATED IN OTHELLO, WA)

NEW S/S Shaker Deck, with Aprox. 66″ L x 17″ Top Deck Frame (LOCATED IN OTHELLO, WA)

Potato Scrubbers

(3) Odenberg S/S Potato Scrubber Unit, Mounted on S/S Frame with Drive (LOCATED IN OTHELLO, WA)

S/S Single Wall Balance Bins

(2) S/S Single Wall Balance Bin, with Aprox. 21-1/2″ W Discharge Belt (LOCATED IN OTHELLO, WA)

Pumps & Circulation

(2) 2017 Beedal 7.5 hp Hose Pump, M/N Beedal80, S/N 26422 & 26423, with Top Mounted Motor, 1774 RPM (LOCATED IN OTHELLO, WA)

Misc. Highlights

John Deere Evergreen Road Boss Grader, with Aprox. 6-1/2 ft. W Grading Area (LOCATED IN OTHELLO, WA)

Key S/S Hopper & Dumper, with On Board Hydraulic Unit, with Aprox. 30″ W Belt, Mounted on S/S Frame (LOCATED IN OTHELLO, WA)

Buusch 30 hp Vacuum Pump, Type: RCJ630.B4Z6.1015, S/N C6417, with 1180 RPM Motor (LOCATED IN OTHELLO, WA)

S/S Single Wall Collection Tub, with (1) Vertical S/S Single Wall Tank, Mounted on S/S Legs (LOCATED IN OTHELLO, WA)

(2) 2006 Harris Thermal Shell & Tube Heat Exchangers, S/N 24188, Mounted on Mild Steel Mounted (LOCATED IN OTHELLO, WA)

Camper/Trailer, with Hitch Mounted (LOCATED IN OTHELLO, WA)

Starch Systems, Includes Sweco S/S Separator, M/N XS48S55, S/N 771310-A1000, IPEC Rotary Drainage Drum, with Circulation Pumps & S/S Platform, Includes (2) Sets of Funnel Filtration (LOCATED IN OTHELLO, WA)

Large Assortment of Parts

Row of Spare Parts, Includes Assorted Urschel Shredder Parts–NEW in Box, Assorted Bearings–NEW in Box, S/S Rods, Drives, & Other Present Parts In Photographs & Associated with Lot (NOTE: Does Not Include Boxes of Parts on Very Top Shelf) (LOCATED IN OTHELLO, WA)

WALKER 6,200 GALLON S/S AUGER TANK TRAILER, S/N 1W9S44269WN001300, APPROX. 6,913 KG (LOCATED IN ELK HORN, WI) (9817)

ACRO 6,200 AUGER TANK TRAILER, S/N 1A911442321005036, APPROX. 7,285 KG (LOCATED IN ELK HORN, WI) (9830)

ACRO 6,200 GALLON S/S AUGER TANK TRAILER, S/N 1N9S14421XA044148, APPROX. 6,967 KG (LOCATED IN SPRINGFIELD, MO ) (9822)