Kettles, S/S Tanks, Mixing Tanks & Processors

Cleveland 12 Gal. Steam Jacketed S/S Tilting Kettle, Model KET-12-T, SN WT1280-05H-02, 200-208 & 220-240 V, Mounted on 28″ L x 21″ W x 17″ S/S Table(INV#84657)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Self contained electric heated stainless steel chocolate process skid, With approximately 100 gallon capacity S/S jacketed Process tank, 1 HP 460 volt scrape surface agitation, includes Waukesha model 018 U2 positive displacement pump with jacketed head, Watlow electric immersion Heating unit, with control panel. (note, tank missing lids) (INV#80040)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $200.00 USD)

Cherry Burrell 300 Gal. Hinged Lid Jacketed S/S Mix Tank, M/N WPT, S/N 300-56-3753, with Bottom Sweep Agitation, with Aprox. 1 hp Drive Motor, 110 Volts with Baffle, Bottom Side 1.5″ Clamp Type Connection with Ball Valve, Overall Dims.: Aprox. 65″ W x 5′ H (INV#78675)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Rigging, Loading & Site Management Fee: $150.00 USD)

Mueller 500 Gal. Dome Top Jacketed Processor, M/N PCD, S/N D-16000-7, Dome Top/ Concave Bottom, with Baffle & Dual CIP Spray Ball, with S/S Bottoms Mounted on S/S Legs, Tank Dims.: Aprox. 42″ H x 69″ W, with Top Man Door, with Dual 1 & 3/4 hp Top Mounted Agitation Motor, 1725 RPM, 208-230/460 Volts, 3 Phase (INV#69045) (Located at the MDG Showroom – Pittsburgh, PA) (Rigging, Loading and Site Management Fee: $350.00 USD)

Sani Tank approximately 600 gallon capacity enclosed top , dish bottom jacketed processor with scrape surface agitation .S/N 288-1 Max working pressure 150PSI test (NOTE: No Legs–See Photograph) (INV#80035)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $500.00 USD)

DCI 1,500 Gal. Vertical Jacketed S/S Mix Tank, SN C97-D-5210-B, with Vertical Agitator with 1.3 hp / 1700 rpm SEW Drive Motor – 230/460V with Switch, Bottom Sweep Agitation, Dual Sprayball, Bottom Side Hinged Door, S/S Legs, (Aprox. Overall Dim 12′ H” x 90″ W) (INV#83373)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $300.00)

Mojonnier Aprox. 1,000 Gallon Vertical S/S Tank, Model M112.1 SN 1301, with Hinged Lid, 2″ & 4″ Top Connections, 3″ Bottom Side Connection, Level Sensor, S/S Legs (INV#83493)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300.00)

Approximately 300 gallon capacity S/S freon jacketed storage tank, center bridge with (2) lift up covers, with self contained freon refrigeration unit mounted on one end of tank. Mounted on Casters(INV#80036)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $150.00 USD)

Mueller 700 Gal. S/S Farm Tank, M/N M, S/N 70770, with Freon Jacket, Bottom Sweep Agitation with 1/6 hp Drive Motor, 1.5″ Clamp Type Bottom Connection, Overall Dims.: Aprox. 93″ L x 77″ W x 73″ H (INV#78679)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Rigging, Loading & Site Management Fee: $150.00 USD)

Mueller 1,000 Gal. S/S Farm Tank, with Hinged Lid, M/N M, S/N 32966, with Freon Jacket, 4-Prop Agitation with 1/4 hp/1725 RPM Drive Motor, 1.5″ Clamp Type Bottom Connection, Overall Dims.: Aprox. 114″ L x 68″ W x 71″ H (INV#78678)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Rigging, Loading & Site Management Fee: $150.00 USD)

R&D Butter / Mayo Processing Equipment

Gerstenbrerg & Agger A/S S/S Pin Rotor Pilot System, Model Pin Rotor Machine 3x1ltr, SN 1196.002, with On-Board Tribol Pump, 725 psi, 212 degree design temp, Includes 55″ W x 89″ L -Batch/Cooling Skid with 24″ W x 24″ H Jacketed S/S Mix Tank with Top Mount Agitator, MTA Water Chiller Model TAE015, Positive Displacement Pump & 47″ W x 6′ H 2-Door S/S Control Cabinet with Melsec PLC Controller with Display, Computer Cabinet (INV#84659)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300)

Trefa S/S Continuous, Aerating/Mixing System, Type T-50, SN 005.283, with 1.5″ Threaded S/S Head, DTE On-Board Chiller, Danfoss VFD Controllers, Touch Pad Display, 208V, On Casters (INV#84660)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100)

Packaging Equipment

2017 All-Fill A/3200 (Avatar) Vertical Form Fill & Seal Bagger, Model 3200RP, SN 63028, Combination Bagger with Laminate and Polyethylene Packaging Capability, S/S Construction, with Omron Sysmac CP1HPLC with Touch Pad Display, On-Board Videojet DataFlex 6420 Coder with Display, 107 MM Max Print Area, 220V 3 Phase, Size Capability 3″ x 3″ – 12″ x 20″ (Min-Max), Previously Packaging Flour Based Products and Spices, Speeds up to 80 BPM, Initially Set to Run #32 and #44 Free Flow and Non-Free Flow Auger Tooling, Includes Large Assortment of Spare parts on (8) Pallets, Including (5) Fill Bowls, (5) Auger Tubes, (8) 2″ to 7″ Forming tubes, (4) Sealing Heads & Assorted Spare Parts with Manuals, (Estimated Replacement Cost in 2022 More Than $175,000.00 With Tooling), (Estimated Lead Time For Deliver More Than 16 weeks) (Machine on Shipping Skid- Aprox . Overall Machine Dims. 8′ L x 5′ W x 90″ H) (INV#86335)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $500)

HayssenSandiacre Vertical Form, Fill, & Seal Machine, M/N NOVUS 350, All Stainless Steel Design, with S/S Forming Tube, Aprox. 5″ Dia., with (2) Rolls, Aprox. 34″ L, with S/S Rack, with Allen-Bradley PanelView Plus 700 Touchscreen Display (INV#75123) (Located @ the MDG Auction Showroom in Pgh., PA)(Rigging, Loading & Site Management Fee: $1,000.00 USD)

HayssenSandiacre Vertical Form, FIll, & Seal Machine, M/N NOVUS 350, All Stainless Steel Design, with S/S Forming Tube, Aprox. 5″ Dia., with (2) Rolls Aprox. 34″ Dia., with Touchscreen Display (INV#75124) (Located @ the MDG Auction Showroom in Pgh., PA)(Rigging, Loading & Site Management Fee: $1,000.00 USD)

Universal Packaging Vertical Form Fill & Seal Packaging Machine (VFFS), Model S2000C, SN 1711, with On-Board EPI Labeler, Markem Smart Date Coder, Becker Vacuum Pump, with Allen Bradley Logix 5561 PLC Controller with Panelview Plus 700, Kinetix 6000 Servo Drive, (4) VFDs, Includes (3) 2.5″, 3″ & 4 1/4″ Forming Tubes, (Aprox. Overall Dim. 6′ W x 80″ L x 7″ H)(INV#80963)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $200.00)

Winpak Vertical Form/Fill/Seal Pouch Machine, M/N L 25, S/N 25008A, with Allen-Bradley PLC Controls, 230 Volts, 3 Phase, Written Product Sizes: 16 oz.-25 CPM; 8/24 oz. – 20 CPM; 16/24 oz- 25 CPM, with Smart Date X40 Thermal Transfer Printer, Overall Dims.: Aprox. 90″ L x 78″ W x 118″ H (INV#74642)(LOCATED IN BRADDOCK, PA–100 TALBOT AVE. BRADDOCK, PA 15104) (Rigging, Handling & Site Management Fee: $850.00 USD)

2019 CT Pack Single Lane Flow Wrapper with Additional Infeed Conveyor (Approx. $350,000), Model Mach120 SX, SN N76_OTNESTUL1, Currently Set Up For 175 BPM (Can Be Modified To Run Faster), Used For Less Than 1 Year, Previously Packaging 3 FL Oz (88 mL) Novelty Stick Bar, Weight 82-88 G / 2.9-3.1 oz OR 82-89 G / 2.9-3.1 Oz, 147 mm L x 45 mm W x 39 MM H, 480/277 V (Total Cost Approx. $565,500)(INV#74448)(Located @ the MDG Auction Showroom in Pgh., PA)(Rigging, Loading & Site Management Fee: $2250) See Video at https://youtu.be/1_Jn36ZaZx0

2019 Combi S/S Alphapack Pick & Place Case Packer, Model SPP, SN SPP550768, with Bradley Compact Logix L30ERM & Panelview Plus Display, (4) Kinetic 5500 Servo Drives, (5) Allen Bradley Power Flex 525 VFDs, 480V 3 Phase, (Aprox. Overall Dim. 13′ L x 8′ W x 98″ H)(INV#83502)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300)

2016 Combi Pick & Place Case Packer, Model SPP, SN SPP509032, with Bradley Compact Logix L30ERM 7 Panelview Plus 1000 Display, (1) Kinetix 5500 Servo Drive, (2) Allen Bradley Power Flex 4M VFDs, 240V 3 Phase, (Aprox. Overall Dim. 11′ 6″ L x 89″ W x 98″ H) (INV#83503)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300)

Toyo Jidoki 10-Station Automatic Pouch Vacuum Packaging Machine, Model TVP-E4, Product No. A01335, with Omron PLC Controls with Touch Pad Display, Safety Cage, 48V, (Aprox. Overal Dim. 90″ L x 10′ 4″ W x 6′ H) (INV#83497)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300.00)

Ishida 8-Head S/S Rotary Filler Scale, M/N CCW-Z-208B-S/30-P, S/N 17017, 208 Volts, 3 Phase (NOTE: No Controller Included)(INV#80188)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $200.00 USD)

Video Jet Ink Jet Coder, Model 1580, SN 18240010C54H, Mounted on Stand with (1) Head (INV#83481)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75.00)

Pearson In – Line Case Sealer, SN 0004019518, with 10″ W Belt, 460V 3 Phase, (Aprox. Overall Dim. 11 ft L x 5 ft W x 64″ H) (INV#74657)(Located @ the MDG Auction Showroom – Pittsburgh, PA) (Rigging, Loading & Site Management Fee: $150.00 USD)

Lantech Adjustable Case Taper, Model CS300, SN CS000043, with Allen Bradley Micrologix 1000 PLC, 230V 3 Phase, (Mach. Overall Dim. 77″ L x 42″ W x 75″ H) (INV#77608)(Located @ the MDG Showroom in Pgh., PA)(Rigging, Loading & Site Management Fee: $50.00)

Bottling Equipment

48″ W x 54″ D x 54″ H S/S Hydraulic Cap Dump Station with Self Contained Hydraulic Pump/Reservoir with 2 hp / 1725 rpm Pump with On-Board Control Panel, 208-230/460V 3 Phase, (Machine on shipping Skid Aprox. Overall Dim. 7′ L x 6′ W x 89″ H)(INV#84683)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $200)

Fowler Aprox. 23′ L Elevated S/S Cap Hopper, with 50″ W x 54″ L x 6′ D Hopper, Conveyor with 4″ Flights, 1 hp/1725 rpm Drive Motor, 208-230/460V 3 Phase, with S/S Control Panel, (Machine on Shipping Skid Aprox. Overall Dim. 23′ L x 7′ W x 91″H)(INV#84684)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $200)

Aprox. 18′ L Elevated S/S Cap Hopper,With 50″ W x 6′ L x 5′ D Hopper, Conveyor with 4″ Flights, SEW Drive Motor, (Machine on Shipping Skid Aprox. Overall Dim 18′ L x 5′ 9″ W x 101″ H) (INV#84685)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $200)

Diversified Capping In-Line Capper, Model 76-100, SN 76-221, with 4″ W S/S Conveyor, Includes Feed Rail, (Machine Aprox. Overall Dim. 102″ W x 30″ D x 80″ H)(INV#82930)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $150)

Hoppman Portable S/S Bottle Hopper/Elevator, Model EP08/08 SS, SN 30707, with 42″ W x 48″ L x 35″ D Hopper Area, with 8″ W Belt, (Aprox. Overall Dim. 75″ L x 52″ W x 78″ H) (INV#80955)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100.00)

Krones PET Bottle Inspection Unit, M/N PET-VIEW 776, S/N K776270, with Camera & Support Equipment, 230 Volts (INV#70945) (Located @ the MDG Auction Showroom in Pittsburgh, PA)(Rigging, Loading & Site Management Fee: $150.00 USD)

Filler Specialties 18-Valve Mono Block S/S Gravity Filler, SN 1767G185SS1GE, with (5) Head Screw Capper, Includes Gallon HDPE Change Parts with Spare Capper Parts & Manual, (Note: Missing Valves, Rubbers & Float Assembly) (INV#83374)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $300.00)

Pillar Tech. Foiler, Model FOILER F4P201100000, PN AB10057-20, 230V 3 Phase(INV#80956)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100.00)

Pillar Tech. Foiler, Model FOILER FAP201100000, PN AB10057-20, 230V 3 Phase(INV#80960)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100.00)

Ozone Generator

2016 Ozocan Ozostar Ozone Generator, Model WL-3, SN 16520-01-HA6851, with 48″ H x 20″ W Storage Tank, (2) S/S Control Panels, Orbisphere 510 Display & Acme 3 KVA Generator 480V (INV#84682)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100)

Water Processing

Allegheny Bradford Corp. 4′ H x 14″ W S/S Filter Housing, SN 13303-1-1-1, with 1.5″ Clamp Type Top Connection with Valve 3″ Clamp Type Bottom Connections (INV#84668)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of (2) Like New EquipSolutions 44″ L x 20″ D x 46″ H Duplex EZDose Skid with Grundfos DDA Chemical Feed Pumps with GE Cellular Controls & Switch Panels(INV#84679)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Coffee Equipment

CALIFORNIA PELLET MILL, MODEL 25 M FR 382555, VERTICAL SPINDLE RECIPROCATING PELLET MILL, POWERED FEEDER, HOPPER AND CONTROLS, 25 HP, 1765 RPM, 230/460 V (INV#82170)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $(NOTE: Rigging, Handling, Site Management and Loading Fee $1,000 includes Securing to 40×48 Pallet. If Additional Packaging, Cribbing, Skidding Not Included)

HAPMAN SUPERSAC UNLOADER, S/N H12106AA, PORTABLE MOUNTED ON CASTERS (INV#82197)(Located @ the MDG Auction Showroom in Pgh., PA) (NOTE: Rigging, Handling, Site Management and Loading Fee $725 includes Securing to 40×48 Pallet. If Additional Packaging, Cribbing, Skidding Not Included)

HAPMAN PORTABLE HOPPER WITH AUGER CONVEYOR, S/N X12106-BA, HOPPER APPROX. DIMS: 22″ L X 22″ W X 20″ H, AUGER APPROX. 172″ L, DRIVE MOTOR INCLUDED(INV#82207) (Located @ the MDG Auction Showroom in Pgh., PA) (NOTE: Rigging, Handling, Site Management and Loading Fee $300 includes Securing to 40×48 Pallet. If Additional Packaging, Cribbing, Skidding Not Included)

Vegetable Blanching, Freezing & Processing

Lyco S/S Blancher, Overall Dims.: Aprox. 25′ L x 8′ W, with (2) Heat Actuator Valves, Mounted on S/S Frame (INV#74423)(LOCATED AT MDG AUCTION SHOWROOM–PITTSBURGH, PA) (Rigging, Handling & Site Management Fee: $2,200.00)

Liquid Carbonic 13′ L S/S Nitrogen Freeze Tunnel, SN 30490 with 28″ W S/S Belt, 5″ H Spacing, with Onboard Control Panels with Woods VFDs, (Aprox. Overall Dim. 13′ 5″ L x 50″ W x 8′ H (INV#81379)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300.00)

American Extrusion S/S Vertical Corn Meal Mixer, with Cone Bottom Hopper with Powered Auger & Aprox. 26″ W x 23″ L Feed Hopper Hinged Door, (Aprox. Overall Dim. 9′ H x 40″ W) (INV#80238)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $100.00 USD)

American Extrusion S/S Vertical Corn Meal Mixer, with Cone Bottom & Aprox. 26″ W x 23″ L Feed Hopper with Side Hinged Door, (Aprox. Overall Dim. 9′ H x 40′ W)(INV#80239)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee $100.00 USD)

Pill Press

Vanguard 16-Station Tablet Press, with Pro-Face Digital Display, with (2) S/S Hoppers, Mounted on S/S Base(INV#80686)(Located at the MDG Auction Showroom in Pittsburgh, PA)(Rigging, Handling & Site Management Fee: $200.00 USD)

Conveyor Systems

Universal Packaging Inc Aprox 9′ L x 30″ H x 18″ W S/S Inclined Conveyor, Model TC.18.72 M, SN 1736, with Intralox Belt with 6.5″ Flights & Drive Motor, Includes 28″ L x 36″ H x 10″ W conveyor Section with Drive(INV#80973)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100.00)

8′ L x 9″ W x 49″ H Inclined S/S Conveyor, with 10″ Flights, Mounted on Wheels, (Note: Missing Drive Motor) (INV#81386)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75.00)

Nercon Aprox. 10′ L x 6′ W x 40″ H S/S Conveyor Accumulation Table, with Rex Type Plastic Belt, with Baldor 1 hp/1725 rpm Drive Motor, 230/460V, Includes Control Panel (INV#80615)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300)

Aprox. 13′ L x 36″ W x 104″ H S/S Inclined Conveyor with Intralox Type Belt with 8.5″ Divider Flights, S/S Sides, Baldor 1hp / 1740 rpm Drive Motor, 208-230/460V (INV#80279)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $200)

Aporx. 13′ L x 36″ W x 104″ H S/S Inclined Conveyor with Intralox Type Belt with 8.5″ Divider Flights, S/S Sides, Baldor 1hp / 1740 rpm Drive Motor, 208-230/460V (INV#80280)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee:$200)

QC & Lab Equipment

2018 Gemco S/S Laboratory Blender, S/N 022808-2, Job #PP2634, Single Phase, Includes Vacuum Pump, (Retail Cost Aprox. $100,000) (INV#69682)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $300.00 USD)

PerkinElmer Optical Emission Spectrometer, M/N Optima 5300 DV, S/N 077C8082701, 200-240 VAC(INV#68543)(LOCATED AT MDG AUCTION SHOWROOM–PITTSBURGH., PA) (Rigging, Handling & Site Management Fee: $200.00 USD)

Alliance Waters 2695 HPLC System, S/N J03SM7 127M, with Separations Modules & Other Components, 100-240 Volts (INV#68526) (LOCATED IN M. DAVIS GROUP AUCTION SHOWROOM–PITTSBURGH, PA) (Rigging, Handling & Site Management Fee: $200.00 USD)

Alliance Waters 2487 Dual Absorbance Detector, S/N E07487 298M, with (4) Boxes of Waters HPLC Columns, (1) Box of Zorbax High Performance Column, Plastic Tubing, & Other Components (INV#68527) (LOCATED IN M. DAVIS GROUP AUCTION SHOWROOM–PITTSBURGH, PA)(Rigging, Handling & Site Management Fee: $125.00 USD)

Buchi Rotavapor R-215 System, Type R-215, S/N 1000012868, 100-240 Volts, with Buchi Heating Bath B-491, with Associated Glassware to the System (INV#68531) (LOCATED IN M. DAVIS GROUP AUCTION SHOWROOM–PITTSBURGH, PA) (Rigging, Handling & Site Management Fee: $150.00 USD)

Matthews, Inc. CEM Microwave, M/N 907501, S/N MD2584, 208/230 Volts (INV#68549)(LOCATED AT MDG AUCTION SHOWROOM–PITTSBURGH., PA) (Rigging, Handling & Site Management Fee: $25.00 USD)

VDistek 7-Chamber Dissolution Test System, M/N 5100, S/N 5117796, 110 Volts (INV#81097)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $100.00 USD)

Pumps

(2)Fristam 15 hp Centrifugal Pump, Model FPX3551-225, with 3″ x 2.5″ Clamp Type S/S Head, Baldor 1760 rpm Motor, 230/460 V 3 Phase(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Fristam 20 hp Centrifugal Pump, Model FPX3551-250, Slmap Type S/S Head, Baldor 1760 rpm Motor 230/460V 3 Phase (INV#84672)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Like New, Conair Positive Displacement Pump, Model PD, SN 263855, with Roots Pump Model 45 J RB CONAIR BLK, SN 1207955032, with Toshiba 7.5 hp Motor, 3500 rpm, 575 V , with Starter (INV#84678)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Roper Pump, Type 5, SN G-61397, with 3″ CT S/S Head, SEW 15 hp/1740 rpm Drive Motor, 230/460V 3 Phase (INV#82924)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

AND MORE!

Sanitary Valves

Lot of (4) Tri Clover 2.5″ Clamp Type 3-Way Long Stem S/S Air Valves, Model 761, with Control Tops(INV#80570)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Lot of (3) SPX 3″ Clamp Type 3- Way Long Stem S/S Air Valves, with Control Tops (INV#80573)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $50.00 USD)

Centec 4″ S/S Beer Valve with Flanged Connections(INV#81527)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

ABB 4″ Flow Meter with Flanged Connections, Includes (3) Assorted Read-Outs with McNab HSA1 Inlet Turbidity Transmitter, Bailey Fisher Read-Out & Mettler Toledo Read-Out (INV#81528)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of Assorted 9 Pcs Pipe Fittings Including Traps, Ball Valves & Butterfly Valves, Up to 6″, Most S/S (INV#81529)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of (4) Assorted Valtek 1.5″ & 2″ Pneumatic Control Valves, (2) with Logix 3200IQ Digital positioners, with Flanged Type (INV#81530)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of (5) Jamesbury 4″ S/S Pneumatic Butterfly bValves, Flanged Type (INV#81531)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of Kinetrol (3) 4″, 3″ & 1″ S/S Pneumatic Butterfly Valves, (2) Model 090, Flanged Type (INV#81532)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of (2) Flowserve Valtek 6″ Pneumatic Control Valves, Type Maxflo, with Logix 3200IQ Digital Positioner, Flanged Type (INV#81533)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

(2) Lot of (2) Flowserve Valtek 4″ & 3″ Pneumatic Control Valves, (1) S/S, (1) with Logix 3200IQ Digital Positioner, Flanged Type (Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of (8) Jamesbury Assorted Sized S/S Pneumatic Butterfly Valves, Flanged Type, Up to 3″ (INV#81536)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Lot of (3) Jamesbury S/S Pneumatic Butterfly Valves, Flanged Type (INV#81537)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

New Spriax/Sarco 4″ Control Valve, Type 4KEA73PTSUSS.2, SN 243758, with SP400 Controller(INV#84677)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Powder Handling

Great Western Manuf. Tru – Balance 36″ Gyroscopic Pressure S/S Sifter, Model TB, SN 611/2, with 2 Deck Design, 3″ Top Connector, 3″ Bottom Connector, 6″ Discharge, Pneumatic Lift, 1.5 hp / 1160 rpm Motor, 460V 3 Phase (INV#81440)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $200.00)

Automated Ingredient Systems Aprox. 82″ H x 3′ W Cone Bottom S/S Dust Collector, with (6) Cartridges, Hinged Front Door, 4″ & 5″ Side Connections, 12″ Flanged Bottom, Bindicator, Magnehelic Gauge, Mounted on S/S Frame, (Aprox. Overall Dim. 82″ H x 5′ W)(INV#80971)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $150.00)

Flexicon S/S Portable Powder Dump Hopper, SN 46023, with 36″ W x 36″ L Interior with Hinged Lid, S/S Screen, 4″ Top Connector, 8″ Bottom, (Aprox. Overall Dim. 40″ W x 50″ L x 6′ H)(INV#80968)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100.00)

(2) 36″W x 32″H Cone Bottom S/S Powder Hopper, with Load Cells, Pneumatic Top & Bottom Valve with Digital Controller(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100.00)

IDECO 24″ W x 41″ H S/S Powder Hopper, with 2″ CT Bottom with Ball Valve, Screens & Lid (INV#82922)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Prater 4′ L x 16″ W Rotary Sifter Screen with Model 91, SN 9RS295102, with Reliance 3 hp/1730 rpm Motor, 6″ Flanged Top Connection, 230/460V (INV#82923)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Kice Power Air Lock / Star Valve, Model VJ14X10X10, SN 191011 C32454, with .5 & .75 hp Drive Motor, 1725/1425 rpm, 230/460V 3 Phase(INV#84738)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Kice Power Air Lock / Star Valve, Model VJ14X10X10, SN 259199-2-1 C38499, with .75 hp Drive Motor, 1725 rpm, 208-230/460V 3 Phase (INV#84739)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Kice Power Air Lock / Star Valve, Model VJ14X10X10, SN 260339-49-C39361, with 1 hp Drive Motor, 1740 rpm, 208-230/460V 3 Phase (INV#84740)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

Lorenz 10″ 2 Way Pneumatic Divert Valve(INV#84741)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $75)

(3) Buhler Miah Rotary Star Valve Model MPSX 27. with 8″ Top Connector (Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $30)

Metalcraft Transtore Tumble Blender, Model 1144400SN 44113-02, with Aprox. 11′ H x 5′ W x 5′ L Pedestal, (2) Pcs Aprox. 6′ L x 52″ W x 34″ & 31″ D Vessels, Nord 15 hp/1770 rpm Drive Motor, 230/460V, Control Panel with Allen Bradley Micrologix 1200 PLC with Powerflex 70 VFD(INV#80984)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $300.00)

Prater 16″ W Rotary Sifter Screen, Model G5HFSI, SN 5653, with Teco 15hp/3530 rpm Motor, 230/460V, 8″ W x 20″ L Flanged Top Connection, 10″ Flanged Bottom Connection, Mounted on 40″ H Frame (INV#82933)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $100)

Prater 20″ W Rotary Sifter Screen, Model G5HFSI, SN 5684, with US 15hp/3540 rpm Motor, 230/460V, with Teco VFD Control, 8″ W x 20″ L Flanged Top Connection, 10″ Flanged Bottom Connection, Mounted on 67″ H Frame, (Aprox. Overall Dim. 66″ W x 40″ L x 108″ H (INV#82934)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $150)

Portable S/S Feeder with 11.5″ W x 17″ L x 16″ DHopper with 1/2 hp/1750 rpm Gate Drive Motor, Mounted on Stand (INV#81400)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50.00)

Plant Support Equipment

(2) 2017 Ingersoll Rand Desiccant Air Dryer, Model HL8001HE0AA, SN WCH1017140 & SN WCH101855, 150 PSIG, 115V, with Control Panel & Filters, (Aprox. Overall Dims. 67″ W x 55″ D x 85″ H) (INV#84358)(INV#84359)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $200)

2013 Ingersoll Rand Desiccant Air Dryer, Model HL6001HE0AA, SN 540914, 150 PSIG, Single Phase with Control Panel & Filters, (Aprox. Overall Dims. 58″ W x 55″ D x 7′ H) (INV#84360)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $200)

2011 Ingersoll Rand Desiccant Air Dryer, Model HL6001HE0AA, SN 519833, 150 PSIG, Single Phase with Control Panel & Filters, (Aprox. Overall Dims. 58″ W x 56″ D x 7′ H) (INV#84361)(Located @ the MDG Auction Showroom in Pittsburgh, PA)(Handling, Loading & Site Management Fee: $200)

New Ingersoll Rand 36″ H x 10″ W W Air Filter, PN 23414925, with 6″ Flanged Connections(INV#84669)(Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)

Anver Vacuum Lifting System with VT100-2.5-D7 Lifter & VB-7 Vacuum Generator, Includes Model VTB-12-M Spare Lifting Attachment(INV#74852)(Located @ the MDG Auction Showroom in Pittsburgh, PA) (Rigging, Loading & Site Management Fee: $25.00)

(2) Southworth 44″ Pallet Positioner, Model 4ZC16 (Located @ the MDG Auction Showroom in Pgh., PA)(Handling, Loading & Site Management Fee: $50)