3000 Gallon Jacketed Insulated Stainless Steel Horizontal Storage Tank, horizontal mixer. (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $475.00***EUSA***

1100 Gallon (approx.) Stainless Steel Single Wall Tank-72″ diameter, 72″ straight side, top entering Scrape Surface Mixer with motor and gear box installed above. Flat top and bottom with various openings on top and 3″ bottom outlet (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $375.00***EUSA***

Viking Pump Model KK124A Stainless Steel wet parts on base, SEW Gear Box and Dual Voltage (230/360) 1740 RPM HP3 Motor, Stainless Steel Guard on Coupler, 3″ Inlet/Outlet and On/Off Switch on Base. (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $75.00***EUSA***

Stainless Steel Auger Conveyor – Single shell, 12″ Dia. 8 ft long, 2HP drive and SEW Gear Reducer. (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $275.00***EUSA***

Square D 1200 Amp Motor Control Center, Model 6 with (1) 1200 Amp, Main (1) End, (3) 250 hp Soft Starts and (2) 200 hp Soft Starts (NOTE: MCC Sections are New and Never Installed) (Load Fee $500) (Located Warehouse Belgium, WI)

Aprox. 8″ x 9′ S/A Incline Auger Conveyor with 1.5 hp Motor (Load Fee $200) (Located Warehouse Belgium, WI)

Crest Boiler, Model FBN 1500, S/N A15H 00272993 with 1,500,000 BTU, Pumps and Heat Exchanger (2014) (Load Fee $300) (Located Warehouse Belgium, WI)

CFR 80,000 lbs. per hour HTST Skidded Pasteurizer with 4″ Holding Tubes (Load Fee $1,000) (Located Warehouse Belgium, WI)

AP In-Motion Checkweigher with Aprox. 30″ L x 17″ W Belt (Load Fee $100) (Located Warehouse Belgium, WI)

Constant Push-Back Pallet Racking, Aprox. (2) 5-Bay x 3-Deep x 2-High (Load Fee $300) (Located Warehouse Belgium, WI)

AmbFlex Spiral Accumulation Conveyors, S/N 18689-03 , Aprox. 16 ‘Tall x 6’ Dia. with 16 “Belt (Load Fee $500) (Located Warehouse Belgium, WI)

S/S Cap Hopper with Dayton 1/30 HP/CV Motor (INV #74932) (Located Hanford, CA)

APV Centrifugal Pump, Model PUMPA-1-1/2″ S/N A1656 (Located New Bothwell, Manitoba, Canada)

Welliver Potato Sizer, Model 19853 (Load Fee $250) (Located Morris, MN)

Key S/S Shaker Deck, Model 427382-1, S/N 99-47254, Aprox. 24 ft. by 30″ with Motor, Note: Very Good Shape (Load Fee $250) (Located Morris, MN)

Aprox. 12″ S/S Transfer Auger with 3 hp Motor (Load Fee $100) (Located Morris, MN)

Glenwood Inglewood Water Filters (Loading Fee $500) (Located Dixon, IL)

Vilter 125 HP Ammonia Compressor (NOTE: AVAILABLE FOR PICK-UP AT THE END OF SEPTEMBER) (Loading Fee: $300) (Located Dixon, IL)

SPX Stainless Steel Fristam Centrifugal Pump; 2 1/2″/2″; Model: WS 30/30 1/13 15 HP; 230/460V;3520 RPM; (Located Dixon, IL)

Stainless Steel 100 gal Processi ng Tank, with Agitator, CIP and Jacket( cooling, heating) (Loading Fee $300) (Located Dixon, IL)

Pasterurizer 5400 gal/h with ballast tank, hold tube 2 1/2″; Valves; Electric panel. (Loading Fee $1,000) (Located Dixon, IL)

Hyster 4,800 lb. Capacity Forklift, Model E50XN-33, S/N A268N0916K with 48 V Battery, 189″ Max. Height Lift (Loading Fee $500) (Located Dixon, IL)

Videojet Printer 1520 (Loading Fee $100) (Located Dixon, IL)

Multivac R530 Thermoformer Sealer, S/N 2544 with 600 WEB Width 280 Index, 220 V, 3 Phase, Year 2001 with (3) Sets of Tooling with all New Gaskets, One Guillotine in the Machine and One Extra Brand New Guillotine, Updated Drive and Touchscreen by Multivac, All New Guards, Lots of New Parts (NOTE: Code Dater That is in Picture is Not Included) (Load Fees $500) (Located Gardner, KS)

Busch RAO 250 Pump, Recently Rebuilt – Pulls Down Great (Load Fee $100) (Located Gardner, KS)

Fadal 4020 CNC Mill with (2) Vises, Clamp Set-Up, Lots of Tooling and Coolant Recirculator (NOTE: Dresser in Picture Not Included) (Load Fee $500) (Located Gardner, KS)

Multivac H050 Handling Module, Brand New, Never in Service, Condition is New – The H050 handling module automates pack separation for multi-track packaging systems cost-effectively and hygienically. The accurate positioning allows denser loading of conveyor belts, and downstream processes achieve maximum output. — Optimized for end-of-line packaging activities; High speed and precise Compact, with a space-saving design; Easy to clean and maintain; Quick changeover; User-friendly controls, operated from the terminal of the packaging machine Can be customized to individual requirements; Can be used to load roll stock machines. Also, can be used downstream in seal scanning applications. Buyer assumes all responsibility for shipping and handling. (NOTE: ITEM #146C to #146E Conveyor May work with this Unit) (Load Fee $575) (Located Independence, MO)

Multivac Conveyor, Aprox. 78-1/2″ L x 25″ W x 42″H, 520 Web, 3 Phase, Rubber Belting, Like New (Works with Item #143) (Load Fee $100) (Loctated Independence, MO)

Osgood Cultured Products Filler, Model 6400, S/N 635 Single Index 6-Lane Filling System, Tamper Evident System, Lid Inserter, 220/240 Vac., 3 Phase, 80-100 psi., 6 oz. – 8 oz. Fill Volume (200 to 300 Containers Per Min.) (Load Fee $2,500.00) (NOTE: LOCATED IN Hartsville, TN)

Multi-Vac Thermoformer/Horizontal Vacuum Packaging Machine, Model R230, S/N 846,415/3+N/50 with Tooling, Mfg. 2000 (Rigging Fee $300.00) (Located Bladenboro, NC 28320)

Posimat N15 Rotary Bottle Unscrambler, Now tooled for a plastic container aprox. 2.25″ Dia. x 6″ H, Uses Allen Bradley SLC 5/03 PLC Controls and Allen Bradley DTAM Plus Panel, 480V, Plus Tec Belt Conveyor (Located Miami, FL)

FELDMEIER 500 GAL. S/S JACKETED TANK, S/N E-561-02 with HIGH PRESSURE VESSEL 

25 CUBIC FOOT HORIZONTAL RIBBON BLENDER APPX DIMENSIONS OF INFEED ON TOP 49”L x 25” DEEP, APPX DIMENSIONS OF GRINDER BLADES 78” L X 34” DIAM

S/S VIBRATORY SHAKERS / SEPARATORS / SCREENERS, W/ APPX 11 REMOVABLE SCREENS, APPX 46″ diam x 23″ depth

WCB HOMOGENIZER MODEL 1000, S/N 218556 98, PLUNGER SIZE 1.0, CAPACITY 350 GAL/HR, 5000 PSI, 20 HP MOTOR

TOLAN 400 GALLON S/S PRESSURE VESSEL, S/N 8219 

200 CUBIC FOOT S/S RIBBON BLENDER, APPX DIMENSIONS OF RIBBON BLADES 180”L x 52” DIAM, APPX DIMENSIONS OF GRINDER BLADES 34” W x 78” L, GEAR DIAM APPX 48”L,FALK ULTRAMAX GEAR DRIVE, MODEL 2080FZ2A, M.O. 02-0C3347-01, RPM IN/OUT 1750/69.5, APPLIED HP 60, CATALOG HP 96.7 

APV PILOT S/S SPRAY DRYER, MODEL PSD 58, S/N 35062,S/S PRESSURE VESSEL W/ S/S PLATFORM, APPX internal 50″ Diam x 50″ depth

SANIMATIC S/S PORTABLE COP SYSTEM, APPX INTERNAL DIM. 23″W x 50″L x14″H

Kanara 25-Station Tablet Press, D Tooling 

Kanara 23-Station Tablet Press, D Tooling 

Stainless Fluid Bed Processor Dryer 

New in 2012 Lab All S/S High Shear Mixer 

Reitz 6000 lb. S/S Sanitary Dual Shaft Ribbon Blender, Model RS-34-K5408, S/N RS-85000271 with Twin 34″ Diameter Ribbons, (2) Marathon 30 hp Drives, 230/460 V, You can run one or both ribbons at the same time and same for discharge outlets, Dual End Air Operated Discharges, Complete Cover with Dual Sprayballs for Cleaning. Tub Dimensions 96″ L x 68″ W x 45″ Deep, Overall Dimensions Aprox. 135″ L x 96″ W x 106″ H; System is complete with controls and couple extra power outlets to run dumpers (NOTE: All Air Cylinders and the top covers were removed for shipping and will be reattached prior to shipping. THIS UNIT WILL NEEED TO SHIP VIA FLATBED AND IS VERY HEAVY WILL NOT LIFT WITH 5,000 LB. LIFT) (Please inquire for shipping rate) (Located Hortonville, WI)

DairyCraft Inc. (DCI) 150 Gal. S/S Jacketed Vertical Processor, Model 79-F-24493-2, with Twin Action Scraper Agitated Side and Cone, Dual 3 hp Drive Motors, 230/460 V, 2-Zone Jacket Side and Cone, Pressure Rating Tag Not Available. Unit was last used to heat the jacket with Hot Water, Overall dimensions of Vessel including Agitator Drives is 120″ H, Tank Measures 30″ in Dia., 19″ Discharge Height Through 4″ Outlet with Valve, Infeed Height is 89″, (NOTE: New Scraper Blades Will Be Required But Not Furnished) (Processor will be Layed Down so can be crated and shipped common carrier. Unit will be crated at no charge. (Please inquire for shipping rate) (Located Hortonville, WI)

Cherry Burrell 100 Gal. Jacketed Agitated Kettle, National Board #3574, S/N E-487-90 with 2 hp S/S Washdown Drive Motor, 3/60/230/460 V, Single Motion Scrape Agitation Sides and Cone, 2-Zone Jacket Rated for 100 psi @ 350 degree F, 2-Piece Hinged Covers, 3″ Center Bottom Outlet with Vvle, 12″ Clearance from Outlet. This could be raised with Casters or Additional Length Added on. Overall Dimensions Aprox. 42″W x 42″ Deep x 94″ H including the Drive Motor, (Will Crate Unit at No Charge to Ship Common Carrier – Please inquire for Shipping Rates) (Located Hortonville, WI)

PMR (Packaging Machinery Resources) Dual Lane Continuous Container Filler, Sealer, Lidder, Model 1300, S/N 20070207, with All S/N Sanitary System, 440 Volt, Allen Bradley Micrologic Controller, Allen Bradley PowerFlex Speed Controller, Allen Bradley Panelview 300 Control Pad, Unit is on Casters, System is rated at Aprox. 30 Containers Per Minute, Current Container Diameter is Aprox. 6″, — This System Denests the Containers, Fills the Containers, Puts a Protective Seal on the Container and then Lids. (NOTE: This System will need to Ship Via Flatbed so please inquire for shipping costs) (Located Hortonville, WI)

Shanklin Automatic Horizontal Flow Wrapper, Model F-4A, S/N F8912 with Allen Bradley Micrologic Controller, Allen Bradley PanelView 300 Touchpad Display, 230 V, Overall Dimension Aprox. 120″ L x 50″ W x 68″ H (NOTE: Unit Should Ship Via Flatbed but Could Possibly Go Common Carrier – Please inquire for Shpping Rates) (Located Hortonville, WI)

FMC Campbell Horizontal Flow Wrapper, Model 2201, S/N 2200-2304 with (2) Universal Labelers, Model L15R, S/N L15H-1011R-05-4880 and S/N L15H-1011R-05-4780, Seal Bar is 8-1/2″ W x 1 Up Design, Allen Bradley PanelView 600 Controller, Omron Top/Bottom and Fin Seal Heat Controls, Advance/Retard Film Registration Control, Infeed is Aprox. 96″ L (Missing Chain), Aprox. 10″ W x 25″ L Exit Conveyor, Finwheel – Update 2002, Parent Roll Update 2002, Air Tucker Add on 2007, OAD’s Aprox. 16′ L x 50″ W x 90″ H (Located Hortonville, WI)

RMF Gas Flushed Snorkle Vac, Model SV453, S/N 295 with 48″ Seal Bar, Suction Cups to Hold Bag in Place, Busch 3 hp Vacuum Pump, Model RC0063, 208/230/460 V, Unit is Portable on Casters, Overall Dimensions Aprox. 57″ W x 34″ L x 88″ H (NOTE: Will Crate for No Charge to Ship Common Carrier – Please inquire for Shipping Rates) (Located Hortonville, WI)

Waukesha Cherry Burrell S/S Aprox. 6 x 48 Twin Tube Thermutator, Model 648L, S/N 1707 with (2) 10 hp Drives, 230/460 V, Maxium Allowable Product Pressure 400 psi, Maximum Allowable Product Media 250 psi, Maximum Allowable Product Temperature 400 Degree F, Maximum Allowable Product Media 250 Degree F, All S/S Sanitary Food Grade System, (NOTE: Will Crate the Unit at no Charge to ship common carrier– Please inquire for shipping rates) (Located Hortonville, WI)

Klockner Medick Horizontal Blister Packaging Machine, Model CP-2EL, S/N 94KM019 with 220 V, 3 Phase, 60 Cycle, FOB FL (Located Hialeah, FL)

Hamilton 200 Gal. S/S Steam Jacketed Vacuum Mixing Kettle, Model SA, S/N D-2797 with Scrape Surface Mixing Kettle, 3 hp, 230/460 V, 90 psi (Located Hialeah, FL) (FOB FL 33016)

Lee 750 Gal. S/S Steam Jacketed Kettle, Model 750D9MS, S/N C1817, Aprox. Rated at 90 psi (Kettle – 1) (Shipping info 7 ft. x 7 ft. x 7 ft. – Aprox. 3,000 lbs.) (Located Hialeah, FL)

Patterson Kelley 2 Cubic Ft. S/S V-Blender, S/N 111279 with Lids and Bottom Covers, 1.5 hp Motor, 1735 RPM, 3 Phase, 220/440 V, Shipping Dimensions Aprox. 7 ft. L x 65″ Tall x 52″ Deep, 750 lbs. (Locted Hialeah, FL – FOB 3301

Safeline 6″ x 24 ft. Food Grade Metal Detector, Mounted on Conveyor (Last Used in Food Plant) Sold “As Is Where Is) (Located FOB Hialeah, FL 33016)

Distek Evolution 6100 Dissolution Tester. Model 6100. As shown in photos. (Located Central New York, NY)

Tablet Sizer – Custom Made, 10-Lane unit. As shown in photos. (Located Central New York, NY)

CEPA Continous Centrifuge. Model: LE, Serial: 402 26116. 40,000 RPM, 5 – 30 Liters per hour, Inside Diameter is 43mm, Filling Amount: .5 Kg, Filling Volume: .25dm3, As shown in photos (Located Central New York, NY)

Perkin Elmer UHPLC unit. This is an ultra-high performance chromatography (UHPLC). As shown in photos. (Located Central New Jersey)

ProQuip tablet sizer. This is a 4 lane unit in operating condition. As shown in photos (Located Central New York)

Hobart Mixer. Model H600DT, Serial: 11-396-538, 60 Qt Capacity. 2 hp, 460 Volt, 3 Phase 60 Hz Motor. Comes with 1 bowl, 1 mixing blade and 1 bowl dollie. As shown in photos (Located Central New York)

Omega Model: CDF-1.5DI Desiccant Inserter. Model: CDF-1.5DI, Serial: 01-J28675,This is a barrel type inserter. 120 Volts, 1 Phase, 60 Hz, Air: 80 PSIG (Located Central New York)

Acrison Model 402X-850-200-BDFX1-5-GG Weight-Loss’ Weigh Feeder – Mfg in 2018. As Shown in photos (Located Central New York)

Ackley Tablet Printer with Feeder. Both units are on wheels, Printer Serial Number is: 1181. As shown in photos. (Located Central New York)

Index Capsule Polisher with Empty Capsule Reject. Model: I-200-ECE, Serial: 0110-26, Variable Speed, On casters. As shown in photos. (Located Central New York)

Web Techniques Label Rewinder/Inspector-M#WT-25LCI-This unit uses a Strobe Light for High speed label Inspection and Photoelectrically counts the labels on the roll. Specs: Max web width: 7″ Max Unwind Diam: 24″ Max Rewind Diam: 18″ 115V/1Ph/60 Cycles. As shown in photos (Located Central New York)

Screw Feed Auger Feeder/Hopper “Sold As Is – Where Is”, As Seen in Photos (Located Central New York)

Dott Bonapace Capsule Filler. Model: In-Cap, Serial: 119-01. Capable of 50 CPM, 8 filling stations, new in 2001. Electrics are 110v/60hz. As shown in photos. ** Please note – All sales of tabletting and encapsulation equipment will be registered in accordance to D.E.A. guidelines. ** (Located Central New York)

Key International 16-Station Tablet Press. Model: DB-16, Serial: JI-2124. 16-Stations, “B” Tooling, Keyed Head. Catalog rated speed is up to 1000 TPM. As shown in photos ** Please note – All sales of tabletting and encapsulation equipment will be registered in accordance to D.E.A. guidelines. ** (Located Central New York)

Evergreen 30-Valve Gal. Bottle Filler, Model 30STSF with Snap Screw Closures, Gal. Handling Parts, Right to Left Flow Can Be Changed, CIP Sprayball, Tray and Tri-Flo Liquid Level Control (NOTE: Seller can Manufacture Additional Container Handling Parts at Additional Costs) (Located Baltimore, MD)

JOHNSON INDSUTRIES 40 LB CHEESE BLOCK CUTTER, MODEL 879122, CONFIGURATION 4002-PN LSP RHT, PORTABLE UNIT MOUNTED ON CASTERS (located Minerva, OH)

40 LB BLOCK FILLING LINE (Located Minerva, OH)

VORTRON MEAT AND CHEESE COLD SMOKEHOUSE, MODEL PRO-TPC, (Located Minerva, OH)

2012 COMBI TRAY FOMER, MODEL HTF (TWO-STAGE PROCESS), RUNNING A BERNER 15.75″ X 6.1875″ X 5.5″ TRAY @ 10-15 TPM, STANDARD MINIMUM 8.5″ X 8.5″ X 2″, STANDARD MAX 24″ X 24″ X9″, STANDARD MAX BLANK SIZE 42″ X 42″, ALLEN BRADLEY PLC, 230/3PH (Located Minerva, OH)

WESTFALIA MSA100-01-076 SEPARATOR, S/N 1664 276, NO BOWL, NO CONTROLS (Located Minerva, OH)

Waukesha Clamp Type S/S Pump Head, Model 015U1, S/N1000003037522 with S/S Impellers (Never Used) (Located Harrodsburg, KY)

Allen Bradley PowerFlex 70 -15 hp VFD, Cat #20A D 022 A 3 AYNANCO, Series A, 480 V, 3 Phase (Appears Unused) (Located Harrodsburg, KY)

Mitsubishi F700 Inverter, Model FR-F740-00170-NA, S/N Y4829D014, 3 phase, AC380 – 480 V (Appears Unused) (Located Harrodsburg, KY)

EcoLab Touchpad Display Panel, Model 3410 T, S/N 676899-3D0, 90 – 250 Vac (Located Harrodsburg, KY)

Waukesha S/S Pump Head, Model 015, S/N 436384 07 with Clamp Type Outlets, S/S Impellars, (Used) (Located Harrodsburg, KY)

Tetra Pak Homogenizer (Located Ontario, Canada)

Comtec S/S Automated Pie & Tart Crust Press, Model 2900, S/N EA1005 with (2) 12-Station Dies, Presses Up to 800 Per Hour with Touchpad Display, 240 V, 3 Phase, (Forms Uniform Scrapless Crusts in Pans for Pie and Tarts (Located  Ontario, Canada)

Cinelli Croissant Line (Located Ontario, Canada)

Baker Perkins Bread Dough Divider (Located Ontario, Canada)

Athena Bun Divider with Outfeed Conveyor (Located  Ontario, Canada)

2006 Rondo Doge 24″ W S/S Dough Sheeter, Type SFA 612, Machine No. C6A271106 with Touchpad Display, (2) 5 ft. L Conveyor Feed and Outfeed, 220 V, 3 Phase (Located Ontario, Canada)

2016 Unfiller S/S Depositor, Model CCM18-DOP66, S/N 080, 220 V, Single Phases, Largest Motor 3/4 hp with Double Roll (Load Fee $300.00) (Located Fort Worth, TX)

Unifiller RP Depositor with S/S Infeed Funnel, Touchscreen Display, Mounted on S/S Portable Frame (Load Fee $300.00) (Located Fort Worth, TX)

Unifiller 6-Head S/S Depositor with S/S Infeed Chute, Mounted on S/S Frame (Load Fee $300.00) (Located Fort Worth, TX)

Used Aprox. 50 Gal. Polished S/S Hemi Botom Kettle with Self-Contained Electric/Hot Oil Jacket, Manual Tilt with Pour Spout, Aprox. 30″ Dia. x 22″ Deep, Mounted on Frame, 220 V, Single Phase (Located Hammonton, NJ)

Used Schenck Accurate Mechatron Coni-Flex Screw Feeder, Model MODMS-1G-2A, S/N 66040-02A-MECGM with S/S Contacts, Mounted on Load Cells, Model PWS-17237 with Controls, Built 2001 (Located Hammonton, NJ)

Used TK Fiedler Mill with S/S Contacts, Belt Driven, Electro Polished, Aprox. 3″ Feed Chute, 10″ Discharge, Blade Aprox. 5.5″ W x 3-3/4″ L, Driven by Argus 55 Motor, 2 hp, 460 V, 3 Phase, 17/20 RPM, 60 Cycle, Class 1, Group C & D (Located Hammonton, NJ)

Used ASI Applied Systems LLC Reactir MP System, Eex p d e [ia] II CT 4, S/N 5127 (Located Hammonton, NJ)

Used Westfalia Separator, Type MSA40-06-076, No. 1639 287, 4800 RPM, 230-460 V/3/60, 25 hp, Last Used To Clarify Apple Juice, Manual Included, Tools Included, Unit is in Good Used Condition (Skidding Free of Charge – Crating $500) (Located Palmerton, PA 18071)

Used Lombi 10-Across Square Ravioli Machine, Set on 1-1/4″ x 1-1/4″ Square Ravioli, Mfg. 2001, Can do Aprox. 600 lbs./hr. of Finished Product, Can Do Cheese, Meat, Etc. Unit has been gone over and all worn and broken parts replaced (Skidding Free of Charge – Crating $350) (Located Palmerton, PA 18071)

Used 4-Station OXE Xenia Cold Glue Labeler, Model Xenia 480, Mfg. 1997, 480V/3/60, Rated 50 bpm, Last Ran 12 oz. Beer Bottles Front and Neck Label, Cold Glue Unit (Skidding Free of Charge) (Located Palmerton, PA 18701)

Used Great Lakes Side Seal Shrink Wrapper, Model TS-37, S/N 9051 with Vertical Seal Bar, 480 V/1/60 – 4 amps, Allen Bradley 5/03 PLC with Great Lakes Heat Tunnel, Model HDV122290, S/N 4325, 480 V/3/60 – 29 amps, Unit Mft. 2000, Rated up to 80 Cycles per minute depending on product size, Product Size Aprox. 2″ – 7.5″ x 3.5″ – 60″ L x 2″ – 12″ H, Lug Style Infeed Conveyor for Packaging Multi-Pack Units, Last Ran 64 oz. Apple Sauce Jars – 2 pk, 4 pk, and 6 pk, Footprint Aprox. 35-1/2′ L x 64″ W x 75″ H, Unit is in good used condition but will have to be gone over before put back into production with things such as New Teflon on the seal bar and curtains on the heat tunnel (Skidding Free of Charge – No Crating) (Located Palmerton, PA 18701)

New Severn Trent Electrically Heated Vaporizer, Series 71V3000, 15KW, 480V/3/60, Units was Mfg. 2002 and Never Put Into Service, Still on it original shipping pallet, Unit can vaporize Chlorine, Sulfur Dioxide and Ammonia. Liquid Chemical Being Handled: Chlorine – 8000 lbs. per day (160kg/hr); Sulfur Dioxide: 5900 lbs. per day (115kg/hr) and Ammonia 2000 lbs. per day (40kg/hr) (Skidding Free – Crating $200) (Located Palmerton, PA 18701)

Used Maheen Micro Master Automatic Carbonated Beverage Bottling Machine – 4-Head Filler with Crowner for Carbonated Beverage (Beer/Soda) into 12 oz. Glass Bottles, S/N 120BC032196, 110 V, 3 Phase, 6 hz, includes Manuals (Loaded Free, Palletizing $150.00, Crating $250.00 (Located in Palmerton, PA)

Used Butler Automatic Bag Splicer, Model SP2 1260 4, S/N J6895 LH, Right Hand Unit, Can Handles 12″ W x 60″ Dia. Rolls, Rated up to 400 fpm, 460 V, 3 Phase, 60 hz, with Siemens PLC Controls, Mfg. 2002, United is Equipped with Rolling Knife Head which Allows It To Cut and Splice a Wide Range of Bags, Aprox. Footprint 11 ft. H x 8 ft. W x 4 ft. W – Photos Show the Unit on It side – In Good Used Condition (Loading and Palletizing Free, Crating 450.00) (Located in Palmerton, PA)

Used Tri-Sterling SWF Drop Packer for RSC, HSC, Bliss and Trays, Model 300 DP, S/N 091694, Right Angle Case Feed, Powered Case Infeedand Discharge, Case Elevator for Soft Pack, Omron Sysmac C28K PLC, Rated at 20 to 25 cpm, Mfg. 1994, Case Size Range 10″ to 22″ L x 8″ to 14″ W x 5″ to 13″ H, 2″ H (Min) Trays (Loading Free, Palletizing $150.00, Crating $300.00) (Located in Palmerton, PA)

Buhler Rotary Air Locks – Lot of 5 – Buhler MPSE28-30 Rotary Airlock, Buhler USF 22/22 Rotary Airlock (qty 2), General Resource CO. FV-150 Rotary Blower , Isomatic MPL6 (Located Lebanon, PA) (Load Fee $25.00)

Tarby, Seepex Pump Lot of Progressive Cavity Pumps – Tarby 2TJ4 CDO SPEC, Seepex 76976, Mono CB061AC1R2/E (qty 2) (Located Lebanon, PA) (Load Fee $25.00)

Griswold Pump Lot of 2 Griswold Centrifugal Pumps Models: S-AA-10024 & S AB10032 (Located Lebanon, PA) (Load Fee $25.00)

Bean Pump M0610 / Spirax Sarco VCS22 / Bran-Luebbe N-P31 (2x) (Located Lebanon, PA) (Load Fee$25.00)

Lot of assorted Pumps – Mepco RC06-12-030-34-3 Centrifugal Pump with Marathon Electric 5K48TN218T, Gould’s 3196 Centrifugal Pump, Dean Line In Line Centrifugal Pump with Marathon Motor F H213999, Centrifugal Pump 1.5? x 1? with 4.375? Closed Bronze Impeller and .625? Shaft, Burks GNB6-1-1/2-5.75 Pump (Located Lebanon, PA) (Load Fee $25.00)

4x Allen Bradley 1336 Adjustable Frequency AC Drives — (3) Part #1336-B003-EAFD-FA2-L1 and (1) Part #1336-B007-EAD-FA2-L3 — (Located Lebanon, PA)(Load Fee $25.00)

Allen-Bradley VFDs, Power Supply Lot – CTC Access 4000 Power Supply RDC-2024 x 7, Edwards Signalling 874-N5 Signalling Equipment x3, Allen Bradley VFD-MD3 x2 (Located Lebanon, PA) (Load Fee $25.00)

Huge Lot of Rosemount Flow Meters – Lot of Pressure Transmitters. Rose Instruments 5081-G-HT-67 Two Wire Toroidal Conductivity Transmitter x4, Rosemount Guided Wave Radar Level and Interface Transmitter LIT-5102A1, Rosemount Alphaline Pressure Transmitter, Rosemount 300S1AFISMF Pressure Transmitter, Robertskaw 304B-B2-B5 (Located Lebanon, PA) (Load Fee $25.00)

APROX. 4,500 GALLON 316 GRADE S/S TANK, 7’6″ W X 12′ H (DAMAGED SIDE WALLS) (LOCATED IN EASTON, PA) (Load on Truck $135)

MIELLER 6,500 GALLON DIMPLE JACKETED S/S TANK (DAMAGED SIDE WALLS) (LOCATED IN EASTON, PA) (Load on Trucks $135)

Stainless Explosion Proof 4″ Dia. x 14′ L Adjustable Height from 2′ – 10′ Height (LOCATED IN EASTON, PA

Mosca Strapping Systems Strapping Machine, Type RO-M-P5, S/N 101587, 24 V, Like New, Never Used (LOCATED IN EASTON, PAJ)

Palley Pack 36″ S/S Turntable – Like New (LOCATED IN EASTON, PA)

Kaps-All S/S Capper, Model E, S/N 2816 with All S/S Cap Feed System with Elevated Conveyor Feeder and Kaps-All 4-Head Cap Torque Tightener (Located Easton, PA) (Load Fee $250)

Pack West Snap Capper, Model IN LINE V.S. SNAP CAPPER, S/N IL-#12ESF-RL-2537 with Touchpad Display, Pack West S/S Cap Hopper Elevator, Model Elevator/Sorter/Feeder, S/N CESF-2538 with ___ ” W Belt with Flights (Like New Condition) (Located Easton, PA) (Load Fee $100)

Allegheny Bradford (ABC)S/S Filter, S/N 025107-1-1, Design Pressure 150 psig & FV @300 Degree F with Pressure Gauge — Great Condition (Located Easton, PA) (Load Fee $50)