BOTTLING EQIUPMENT

GAI / Prospero (PEC) Portable S/S Bottle Corker, 220 V, with Manual

PUMPS

Waukesha Positive Displacement Pump, with 3″ Clamp Type S/S Head, Includes Rotors, SEW 5 hp Drive Motor, 330/575 V 3 Phase, Mounted on S/S Frame

Fristam Multi Stage High Pressure S/S Centrifugal Pump, Model FM312-175, SN 72255, with 2.5″ Clamp Type S/S, Baldor Aprox. 10 hp Motor, Mounted on S/S Frame 

Fristam Multi Stage High Pressure S/S Centrifugal Pump, Model FM332-175, SN 68012, with 2.5″ Clamp Type S/S, Baldor Aprox. 30 hp Motor, Mounted on S/S Frame

2014 (3)-SKID LIQUID BLENDING SYSTEM 

Includes 1.) 2014 S/S High Shear Liquid Blending Skid, 25 GPM: Part No. T3420-0101, S/N 21878, Includes (6) Fristam Centrifugal Pumps, M/N FPR741-175, (2) 3 hp 1750 RPM, (2) 10 hp 3500 RPM, (2) 20 hp 3525 RPM, with (4) Allen-Bradley PowerFlex 700 VFDs, Includes S/S Alfa Laval Think Top Air Valves, Overall Dims.: Aprox. 14′ L x 16′ W x 77″ H (Weighs Aprox. 5,300 lbs.) 2.) 2014 S/S 10-Pass HTST Liquid Processing System, 25 GPM Single Pass Using 22 GPM Chilled Water @ 39 Degree & 360 lb./Hr. Steam: M/N LB-X-HTS-001, S/N 21870, Includes (4) S/S Plate & Frame Heat Exchangers, (2) Fristam Centrifugal Pumps, M/N FRP3522-140, (1) 15 hp 3520 RPM, (1) 30 hp, 10-Pass S/S Transfer Tubing, with Alfa Laval S/S Think Top Air Valves, Overall Dims.: 10′ L x 7.5′ W (Aprox. 4,500 lbs.) 3.) 2014 (3)-Tank CIP System, M/N LB-X-TNK-012, Part No. T3420-0103012, S/N 21925, Includes (3) S/S ASME Tanks, with Fristam 40 hp Centrifugal Pump, with Baldor 3540 RPM Motor, with Allen Bradley PowerFlex 700 VFD, with Panel View Plus 600 Touchscreen, with Transfer Pump and NEW Assortment of Support Parts & Valving As Photographed, ENTIRE SYSTEM WITH PARTS—(1) MONEY HIGHEST BIDDER TAKES ALL! CALL OUR OFFICE FOR ENGINEERING DRAWINGS 412-521-5751 (LOCATED IN WINSTON-SALEM, N.C.)

2013 ELECTROPURE EDI DE-IONIZATION WATER PURIFIER SKID

2013 Electropure EDI Deionization Water Purifier Skid, with EXL Plate Press Heat Exchanger, M/N EXL-710-HTS, S/N 1710012, with NEW Enerquip S/S Shell & Tube Heat Exchanger, with 4″ Cooling Flanges & 2″ Process Fluid Sanitary Flanges, Shell Side/Tube Side 150 PSIG @ 375 Degrees/ -20 F @ 150 PSIG, Overall Skid Dims.: Aprox. 10′ L x 5′ W (LOCATED IN WINSTON-SALEM, N.C.)

MACHINE SHOP & PLANT SUPPORT

Hendrick 22″ Dia. Cross Cut Saw, M/N HS 150, with Laser Assist, Aprox. 90″ W Cutting Area, with Inlet & Discharge Tables, 230 Volts/3 Phase, Includes Central Machinery 2 hp Dust Collector (Saw #1) (Located in Leetsdale, PA)

Hendrick 22″ Dia. Cross Cut Saw, M/N HS 150, S/N 29081, with Laser Assist, Aprox. 136″ W Cutting Area, with Inlet & Discharge Tables, 230 Volts/3 Phase, Includes Central Machinery 2 hp Dust Collector (Saw #2)(Located in Leetsdale, PA)

Cutler-Hammer 25-Bucket Motor Control Center, Series 2100, Overall Dims.: Aprox. 100″ L x 19″ W x 90″ H (Located in Leetsdale, PA)

MATERIAL HANDLING

Hyster J50XM-28 / EE Sit Down Pneumatic Electric Fork Truck. Capacity: 5,000lbs, YOM: 2003, Mast: 83″ lowered/127″ maximum fork height Full Free Duplex, 48 Volt, Transmission: Monotrol Shifting Pedal, 42″ Forks, Tires: Pneumatic,EQUIPPED WITH: EE RATING, 4 Way Valve, Cascade 55F-FPS-A141 Side Shift and Fork Positioner, battery side covers, electronic dash display, lights, strobe, back up alarm, seat belt, tilt steering column, good premium seat, cab frame with front window and wiper, 50% Solid pneumatic tires, and 1112 hours. Battery info: Bulldog 24-85-21E, 48 Volt, Serial #1311W416. ***Not the correct size battery for this truck. Used only for moving the truck around***

Crown SC4040-40 3-Wheel Electric Cushion Fork Truck, Capacity: 4000 lbs., YOM: 2004, Mast: 83″ lowered/190″ maximum fork height Full Free Triple, 36 Volt, Forks: 42″, Tires: Cushion. EQUIPPED WITH: Side shifter, Electronic dash display, tilt steering column, work lights, strobe, back up alarm, load back rest, 60% drive / 40 % steer tires, 2922 hours. CAPACITY INFO: 3700 lbs at 172 inches and 3650 at max lift height. SPECS: 54.7 inch wheel base, 62.7 outside turning radius, 77.2 inch length, 42.3 inch width. BATTERY: Enersys E8519, Serial # RFJ458374. 36 Volt. ***Battery is weak and does not hold a charge well***

KETTLES, PACKAGING, PLANT SUPPORT & RELATED

(2) Lee 75 Gal. S/S Kettle, M/N 75D, S/N 443T & 231T, with Bottom Half Jacket, Mounted on S/S Legs 

Lee 75 Gal. S/S Kettle, M/N 75D, S/N 417U, with Bottom Half Jacket, Mounted on S/S Legs

Ishida 14-Station Bucket Scale System, M/N CCW-S-212, Weighing Range: 14 g – 454 g, 480 Volts, with Ishida Control Panel and Aprox. 7′ L x 6′ W x 7′ H Platform with Ladder

Busch 15 hp Vacuum Pump, with Toshiba 1165 RPM Motor, Mounted on Portable Frame 

Weigh Pak S/S Breezy Bagger, S/N 4919, 230 Volts, with Foot Pedal Control, Mounted on Portable Frame 

Loma IQ2 S/S Metal Detector, with Aprox. 19″ L x 13″ Deep x 4-1/2″ Tall Product Opening, with S/S Panels & S/S Cart 

PACKAGING EQUIPMENT

Mettler Toledo High Speed Check Weigher, with High Speed Scale Conveyor, Mounted on S/S Frame

Fallas Case Packer, M/N JR-VAC-CE MK2, Mounted on S/S Frame

PFM Horizontal Flow Wrapper, Mounted on S/S Frame

3M Top & Bottom Case Sealer, with Top & Bottom Taper, with Straight Section of Roller Conveyor

BOTTLING EQUIPMENT

S/S Bottle Inspection Station, with Rear Infeed Conveyor, with Robotic Inspection Arm 

REFRIGERATION

(4) Traulsen S/S Single Rack Blast Chiller, M/N RBC200-28, Refrigerant 404A, with Roof Top Condenser Unit

PLANT SUPPORT

American Lincoln Sit-Down Electric Floor Scrubber, M/N 505-820, S/N 682107, with Head Lights

Nilfish Advance Avenger 36 Volt Scrubber, M/N 2810D, S/N 1738487, with Charger, Runs, and Drives

PRODUCT CONVEYOR

Hoppmann S/S Prefeeder Incline Conveyor, M/N EP08/08, S/N 33244, with 8″ W Conveyor with Flights, Aprox. 42″ L x 24″ H S/S Hopper