Cheese Vats

(4) Scherping Systems S/S Horizontal Jacketed Cheese Vat, M/N HCV-40, Max. Allowable Pressure: 3 PSI @ 220 Deg. F, Min. Design Metal Temp. -20 Deg. @ 3 F, with 7.5 hp Rear Mounted Motor, 230/460 Volts, 3 Phase, with Rear Mounted Motor, Mounted on S/S Legs

Finishing Tables & Fine Savers

S/S Fine Saver, with Top Mounted Agitation Motor, with Centrifugal Pump, Mounted On S/S Legs

Stoelting S/S Finishing Table, S/N 311116NK0001, Overall Dims. Aprox. 42 ft. L x 5 ft. W x 10 ft. 8” H, with 1 hp Centrifugal Pump, Mounted on S/S Legs

Stoelting S/S Finishing Table, S/N 311116NK0002, Overall Dims. Aprox. 42 ft. L x 5 ft. W x 10 ft. 8” H, with 1 hp Centrifugal Pump, Mounted on S/S Legs

Stoelting S/S Finishing Table, S/N 311116NK0003, Overall Dims. Aprox. 42 ft. L x 5 ft. W x 10 ft. 8” H, with 1 hp Centrifugal Pump, Mounted on S/S Legs

Cheese Blocking & Packaging

Cryovac S/S Cheese Blocker, M/N C120, S/N 01103, 240 Volts, with S/S Tower, Includes S/S Vacuum Vessel, with Associated Valving & Piping

Cryovac S/S Cheese Blocker, M/N C120, S/N 01104, 240 Volts, with S/S Tower, Includes S/S Vacuum Vessel, with Associated Valving & Piping

Cryovac S/S Cheese Blocker, M/N C120, S/N 01102, 240 Volts, with S/S Tower, Includes S/S Vacuum Vessel, with Associated Valving & Piping

S/S Vacuum Chamber, Chamber Dims.: Aprox. 35” H x 3 ft. 5” Dia., Mounted on S/S Legs

Equipment Maintenance Limited Vacuum Sealer, M/N MK11PLUS, S/N 129E, 220-240 Volts, 1 Phase

2017 Safeline Metal Detector. M/N SL2000, S/N 12094901, 208-230 Volts, 1 Phase, Opening Dims. Aprox. 17” W x 12” Deep x 8” H, with Aprox. 16” W Plastic Belt, Mounted on S/S Frame

SVD Case Erector, M/N 127WA, S/N 4319, with Nordson Freedom Hot Melt Delivery System, with Control Panel, with Allen-Bradley MicroLogix1300 PLC & Other Components

90 Degree Turn Product Conveyor, with (3) Plastic Belts, with S/S Clad Drive, Overall Length: Aprox. 14 ft. L, Overall Width of Belt: 13-1/2” W, Mounted on S/S Frame

360 Degree Turn Product Conveyor, Overall Length: Aprox. 25 ft. L, with Aprox. 16” W Plastic Interlock Belt, Mounted on S/S Frame

HTST System

CFR Milk HTST System, with Thermaline Inc. Plate Press Heat Exchanger, M/N T28CHM, S/N 4735, (3) Centrifugal Pumps, (1) S/S Single Wall Balance Tank, (1) Shell & Tube Heat Exchanger, (2) ABB Chart Recorders, with Allen-Bradley Micro-Logix PLC & (1) Additional Allen-Bradley PLC

Separator

Alfa-Laval S/S Separator, Type: MRPX 214TGV-74/4103-18, S/N 2937306, with S/S Control Panel, with Allen-Bradley PanelView 550 Display (HOT BOWL)

Processors & Pasteurizers

Walker 1,000 Gal. S/S Processor, M/N PZ, S/N SPG-15600, Nat’L 304 SS, Jacket 75, PSIG MAWP @ 250 F, with Vertical Agitation, with Vertical Bottom Sweep S/S Agitation, with Dual CIP Spray Ball, with Slope Bottom, Bottom of Tank Also Jacketed, with Man Ladder, Built in 1999

Walker 800 Gal. S/S Processor, M/N PZ, S/N SPG-17125, Jacket 75 PSIG MAWP @ 250 F, Min. Design Metal Temp. -20 F @ 75 PSI, NAT’L 316L SS, with Vertical Bottom Sweep S/S Agitation, with Slope Bottom, Built in 2000 (NOTE: Missing Top Agitation Motor)

Alfa-Laval S/S Separator, Type: MRPX 214TGV-74/4103-18, S/N 2937306, with S/S Control Panel, with Allen-Bradley PanelView 550 Display (HOT BOWL)

2013 Custom Fabricating Inc. 800 Gal. Processor, S/N 15517-001A, Material 316 L 304, Jacket 150 PSIG MAWP @ 300 F, with Dual Prop S/S Vertical Agitation, Slope Bottom, Bottom Jacketed, with Top Mounted Motor, with (2) CIP Spray Balls, Mounted on S/S Legs

Aprox. 1,000 Gal. S/S Processor, with Vertical Bottom Sweep S/S Agitation, with Dual S/S Spray Ball, with Slope Bottom, Bottom Piece Jacketed, with Top Mounted Motor

Walker 800 Gal. S/S Processor, M/N PZ, S/N 3422, NAT’L 304 SS, Vessel ATMOS PSIG @ 250 F, Jacket 75 PSIG MAWP @ 250 F, with Top Mounted Agitation Motor, Mounted on S/S Legs (NOTE: Agitation Dismantled)

Walker 800 Gal. S/S Processor, M/N PZ, S/N 3423, NAT’L 304 SS, Vessel ATMOS PSIG @ 250 F, Jacket 75 PSIG MAWP @ 250 F, with Top Mounted Agitation Motor, with Dual CIP Spray Ball, Mounted on S/S Legs (NOTE: Missing Agitation Motor; Agitation Dismantled)

CIP System

(3) Tank CIP System, Steam Injected System, with (2) 450 Gal. S/S Tanks, Tank Dims.: Aprox. 4 ft. H x 4 ft. 7” Dia., Mounted on S/S Legs, (1) 250 Gal. S/S Tank, Tank Dims.: Aprox. 4 ft. H x 3 ft. 5” Dia., with Associated Valving & Piping

Plate Heat Exchangers & Pumps

(2) Nash 20 hp Liquid Ring Vacuum Pump, Size: 3C 3/5, with Premium 1170 RPM Motor, 230/460 Volts, 3 Phase, Mounted on S/S Pump, Built in 2001

Nash 20 hp Liquid Ring Vacuum Pump, with Premium 1170 RPM Motor, 230/460 Volts, 3 Phase, Mounted on S/S Frame

2012 AGS Plate Heat Exchanger, M/N PRO2-S, S/N 2012336, Max. Temp. 250 F, Max. Press. 200, with 1-Section with Aprox. (42) Plates, Mounted on S/S Frame

WCB 7.5 hp PD Pump, M/N 220U2C, S/N 245697-99, with Sterling 1760 RPM Motor, with Aprox. 4” Inlet/Outlet Clamp Type Openings, with S/S Covers, Mounted on S/S Frame

Aprox. 10 hp Centrifugal Pump, with S/S Cover

Aprox. 7.5 hp Centrifugal Pump, with S/S Cover

WCB 10 hp Positive Displacement Pump, with Super-E S/S Clad Motor 1770 RPM, with S/S Motor Cover, Mounted on S/S Frame

Operation Support & Related

2021 Kaeser 20 hp Rotary Vacuum Screw Air Compressor, S/N 1019-7833546, 115 Volts, 3 Phases

COP Tank with Jet Spray, Internal Dims. 6 ft. L x 22-1/2” W x 18-1/2” Deep, Mounted on S/S Legs

S/S Control Panel for (2) Tanks, Includes (2) ABB Chart Recorders, with Allen-Bradley 10-Slot PLC, Mounted on Legs

(5) JRV Inc. Reach-In Freezer, M/N 34-25CHR, S/N S8004893, 115 Volts, 1 Phase

Vertical Mix Tanks

(3) CFI 4,000 Gal. S/S Vertical Mix Tank, with Vertical S/S Agitation, with 7-1/2 hp Agitation Motor, with (2) CIP Spray Balls, with Glycol Jacket

CFI 4,000 Gal. S/S Vertical Mix Tank, with Vertical S/S Agitation, with 2 hp Agitation Motor, with (2) CIP Spray Balls, with Glycol Jacket (FLUSH TANK)

Whey Pasteurization

Whey Pasteurization Skid, with 2012 AGC 5-Section Plate Heat Exchanger, M/N PRO31M, S/N 2012333, Max. Temp. 250 F, Max. Press. 200, with S/S Balance Tank, with Insulated Holding Tubes, with (3) Centrifugal Pumps, with Shell & Tube Heat Exchanger, with Associated Valving & Piping, with Double Door Control Panel, with (2) Allen-Bradley 10-Slot & 11-Slot PLCs, with (2) ABB Chart Recorders

Separators

De Laval S/S Separator, S/N 2898356, with Water Manifold

Alfa-Laval S/S Separator, Type MRPX413S-34-60, Manuf. No.: 2886419, with Water Manifold

Alfa-Laval S/S Separator, Type MRPX-214-74T, S/N 2893675, with Water Manifold

Homogenizer

Gaulin Aprox. 60 hp S/S Homogenizer, with (3) Plungers, with S/S Panels

2012 Burner Control Technology S/S Spray Dryer

2012 Burner Control Technology S/S Spray Dryer, with Associated Blowers, Chambers, & Duct, with Fenwalnet 6000 Fire Supression System

Whey Filling – 40lb Bags

S/S Vertical Dryer Funnel, with Associated Valves

2012 Kason Shaker Deck, M/N K30-1-3A, 230/460 Volts, 3 Phase, with 1/3 hp Motor

Auger Elevator, with Top Mounted Motor, Mounted on S/S Frame

Dual 40 lb. Brown Bag Filler, with Dual Scales & Digital Read Out, with Foot Controls

NZPPS Bag Sealer, M/N NZPPSMS, S/N 848MS, Manual Static Sealer, On Roller Conveyor

Pumps, Controls & Support

2012 SPX Aprox. 5 hp Positive Displacement Pump, M/N 060 U2, S/N 1000002800467, Mounted on S/S Frame

SPX 10 hp Centrifugal Pump, M/N 2065IV, with S/S Clad Motor

Fristam Aprox. 10 hp Centrifugal Pump, S/N 232874, with S/S Head

SPX 10 hp Centrifugal Pump, M/N 2065IV, with S/S Clad Motor

(2) Double Door Control Panel, with (14) Allen-Bradley PowerFlex 753 VFDs (MCC 2 Panel)

(2) Double Door Control Panel, with (9) PowerFlex753 & Other Fuses (MCC 4 Panel)

RO Systems

2013 UF RO Polisher Tank Skid, with (3) CFR Single Wall Tanks, with (5) Centrifugal Pumps, with (4) Shell & Tube Heat Exchangers, with S/S with Control Panel with (1) AB 16-Slot PLC, with Hope Industrial Display, with Associated Valving & Piping, Mounted on S/S Skid

RO Skid, with (21) Tubes, Aprox. 21” Dia., with (5) PD Pumps, with (1) Cent. Pump, with (2) Shell & Tube Heat Exchangers, Mounted on S/S Skid

UF Systems

UF Vessel Skid Control, with (24) Tubes, Aprox. 21” Dia., with Associated Piping & Valving, Mounted on S/S Skid

Paper Fillers

H-6 Buttermilk 1/2 Gal. Paper Filler, with Control Panel Including Allen-Bradley MicroLogix 1500 PLC & Allen-Bradley PowerFlex 4 VFD

EloPak Inc. Filler, M/N Pure Pak P S20, S/N 70029, 220 Volts, 3 Phase

Silos, Tanks & Processors

2009 Mueller 40,000 Gal. S/S Jacketed Silo, S/N 394872-2(NOTE: with Some Top Damage)

4,000 Gal. Single Wall S/S Exterior Silo

10,000 Gal. S/S Single Wall Vertical Silo, Aprox. 11 ft. Diameter, with Bottom Man Door

CIP Systems

Raw & Pasteurized CIP Skid, Single Service System, with (2) Single Wall Tanks, with (2) She’ll & Tube Heat Exchangers, with (2) Pumps, with Associated Valving & Piping, with S/S Double Door Control Panel, with Allen Bradley 11-Slot PLC, Mounted On S/S Skid

Single Tank CIP System, with (1) Fristam Centrifugal Pump, with Wall Mounted S/S Control Panel, with Allen-Bradley 10-Slot PLC, Mounted on S/S Frame

Butter Equipment

The Vane Churn Butter Churn, M/N 1, S/N 2154, Size No. 6, with 15 hp Motor, with (2) S/S Butter Boats, with Allen-Bradley PowerFlex 700 VFD, Mounted On Frame

Cherry-Burrel 1,000 Gal. Processor, M/N EPB, S/N 1000-68-14, with Vertical Agitation & Top Mounted Motor, with Anderson AJ-300 Chart Recorder

S/S 500 Gal. S/S Processor, with Vertical Agitation & Top Mounted Motor, with S/S Hinge Lids, Contents of (7) Pallets

Surplus Equipment & Spare Parts

Aprox. 60 hp Homogenizer, 3- Plunger

Superhomo 60 hp Homogenizer, Series 3000 SGR, 2000 Capacity Gal./Hr., S/N 263855

Lot of Assorted Spare Parts, Includes Bearings, Belts, Seals, Cylinders, Wire, & Other Present Parts

Thermo Goring Kerr S/S Metal Detector, Product Opening: 17-1/2” W x 15” D x 10” H, with Aprox. 7 ft. L Conveyor, Mounted on S/S Frame

Shelf of Separator Parts, Includes Gaskets, Ball Bearings, Sprockets, Buffer Screws, Lock Washers, & Other Present Parts