400 Lot Food & Bev Auction at MDG Showroom

FEATURED ITEM!! NEW NEVER INSTALLED PROCESSOR!!

• NEW 2012 S/S J.V. Northwest Inc. Aprox. 2,000 Gal. Cone-Bottom Processor, S/N 21169, Jacket Specs.: 150 PSI Int. Press. @ 250 F (Max. Allowable Working Pressure), 0 F @ 150 PSI (Min. Design Metal Temperature), with Top Mounted Baldor Super-E S/S Clad Motor, 10 hp, 1770 RPM, 230/460 Volts, Mounted on S/S Legs, (Overall Dims.:  21′ Tall x 76″ Dia.) (Leg Dims.:  113″ Tall)

2011 GEA 3-Stage Cross Flow Micro Filtration System

• 2011 GEA 3-Stage Cross Flow Micro Filtration System, GEA Process Engineering Contract # 3099-1026, Type E2 Extract Fractionation, Feed Quantity: 1,530 Kg/Hr @ 4% TS, Diafiltration Water Quantity 306 Kg/Hr @ 0% TS, Permeate Quantity 1,530 Kg/Hr @ 2.70% TS, Concentrate Quantity 306 Kg/Hr @ 6.49 TS, Volumetric Conc. Rate 5X, Operation Temperature 96 Deg Centigrade, Operation Pressure 4 Bars, Flux Rate 35.2 LMH, Production Time 18 Hrs, CIP Time 2-4 Hours, Feed Rate 16-22 Kg/Min, Permeate 80% of Feed, Each Stage 14.5 m2, temp 92-95 C, Recirculation Flow 5,800-6,000 L/Min, Target Solids Recovery Min 45%, Tubular SS 0.5 mm Pore Size 3/8” Tube Dia., CIP Caustic 6%, Engineering Drawings, Documentation and Manuals Available Upon Request (Cost ~$850,000 in 2011) (Uninstalled and Stored in Pittsburgh. Removed From Production in January 2019) (W934)

Kettles & Processors

• Groen 316 S/S 125 Gal. Kettle, M/N TA-125 SP, S/N 38565-1, Max. WP 90 PSI @ 388 F, MAWP 20 PSI @ 300 F, NAT’L Board: 135026, with Top Mounted Motor, Mounted on S/S Legs
• Groen 316 S/S 100 Gal. Kettle, M/N DN/TA-100SP, S/N 39798-3, Max. WP 45 PSI @ 300 F, NAT’L Board: 134956, with Tilt Frame and Pour Spout, Top Mounted Agitation Motor
• Lee S/S 100 Gal. Kettle, M/N 100D7-T, S/N B5443A, MAWP Jacket 90 PSI @ 332 F MDMT -20 F @ 90 PSI, NAT’L Board:  4882, Top Mounted Agitation Motor, Mounted on S/S Legs with S/S Air Valve
• Lee S/S 100 Gal. Kettle, M/N 100D7-T, S/N B1699A1, Jacket 90 PSI @ 322 F 140 PSI, NAT’L Board: 3691, Mounted on S/S Legs, with Top Mounted Agitation Motor
• Lee S/S 40 Gal. Kettle, M/N 40D9MS, S/N A8592 C2, Jacket 50 PSI @ 300 F 77 PSI, NAT’L Board: 3209, with Anderson Chart Recorder, AJ-300, with Steam Piping and Valves, with Top Mounted Agitation, Mounted on 48″ x 48″ Portable Frame

Mixers, Blenders & Choppers

• Stephan S/S VCM, M/N VM 300, S/N 723.288.01, 220 Volts, 60 Hz, Mounted on S/S Frame, with S/S Panel, with 33-1/2″ Dia. x 21″ Deep Bowl with Blade

S/S Tanks

• (2) Walker S/S 4,000 Gal. Horizontal Jacketed Tank, Model 10593, S/N HHT4886R & S/N HHT4885R, Area Sq. Ft. 84/R-12, Working Pressure 85 PSIG, Tested 145 PSIG, with Dual CIP Sprayball, Top Mounted Agitation, Overall DIMS 160″L x 136″H x 104″W
• Cherry Burrell 5,000 Gal. S/S Horizontal Single Wall Tank, M/N HC, Equipped with Horizontal Agitation, Dual CIP Spray Ball, S/S Front,, Temp Probe, 8′-3″ W x 16′-6″ L x 9′-6″ T (Located at 55 38th Street, Pittsburgh, PA)
• S/S Aprox. 350 Gal. Single-Wall Vertical Tank, Overall Dims.:  85″ Tall x 37″ W, Mounted on S/S Legs
• S/S 100 Gal. Jacketed Vertical Tank, Overall Dims.:  60″ Tall x 30″ Dia, Mounted on S/S Legs
• Aprox. 200 Gal. Cone Bottom S/S Tank with Hinged Lid, with Hinged Lid, 2″ CT Bottom Connector, Insulation & S/S Legs, (W893)
• Aprox. 200 Gal. Cone Bottom S/S Tank with Hinged Lid, with Partial Hinged Lid, 2″ CT Bottom Connector, Insulation & S/S Legs, (W894)
• Aprox. 200 Gal. Cone Bottom S/S Tank with Hinged Lid, with 2″ CT Bottom Connector, Insulation & S/S Legs, (W895)

Filling, Inspection & Packaging

Pack Line 2 Lane Filler, Mod. PXG-2

2 Lane Cup Filler

Inline Filling Systems Cap Torquer, Mod. 33012

Inline Filling Systems Rotary Pack-Off Table

Inline Filling Systems Elevating Hopper

Mettler Toledo Safeline Metal Detector, Mod. V3, 11″ Wide Belt, 12.5″W x 4.5″H

2016 GR-X Manufacturing Bottle Depalletizer, Mod. MA2255, S/N 2016-0912-STMDL-CC

Rotary Pack-Off Table

2015 Cartigliano RF45KW EVO RF Cooker, S/N G021

(2) Bel Taper, Mod. 150 (Missing Parts)

Axon Styrotech Shrink Sleeve Applicator, Mod. EZ-2-200

ID Technology Label Printer, Mod. 250

Videojet Inkjet Coder, Mod. 435

Tronix Rev Inkjet Printer, Mod. A23

Bakery Equipment

Rheon Cornucopia Encruster, Mod. kn400

Oliver 2003 Bread Slicer, Variable Width

Hopper with Dough Chunker

Rondo Dough Sheeter

Mono Depositor

Reading Pretzel Machine Co. Pretzel Maker Baker’s Pride Cyclone Series Oven, Mod. 455BCOGN1, 60,000 BTU/HR

Alto Corporation High Speed Dough Mixer, Model 1600, 3-Roller Bar Design, 1600 lb. Capacity, S/N 10828, Built 1980, Manual & Drawings Included

Stainless steel dual auger dough pump. Augers approximately 6″ diameter x 72″ long. (2) spare augers included. (Located in Chicago, IL)

Meat Grinder

Weiler Meat Grinder, Model 1109, SN 87195, with 26″ L x 20″ W Steel Feed Hopper, 10″ S/S Feed Screw, Drive Motor, Mounted on S/S Frame, Includes Separate 45” W x 46” L S/S Feed Hopper & S/S Belt Cover, (Note: Head Parts Not Included Includes: Locking Ring, Knife Holder & Plates), Includes Manuals, (W883)

Meat Massager / Tumbler

FPEC S/S Meat Massager / Vacuum Tumbler, Model VT85, SN 6242, with 70″ W x 76″ L Drum with Hinged Side Door, 15 hp / 1760 RPM Drive Motor, 208/230 – 460V 3 Phase, Mounted on All S/S Frame, (Overall Dim. 150″ L x 102″ W x 106″ H), Includes Separate Control Panel with Allen Bradley Micrologix 1500 PLC Controller, Derr DVT Vacuum Pump with Canister, Includes Manuals, (W884)

RMF Challenge S/S Meat Massager / Vacuum Tumbler, Model PM3000, SN 1223, with 80″ W x 82″ L S/S Drum with Mounted Hydraulic Reducer Drive Model KKK & Hinged Side Door, Mounted on S/S Frame, Includes Skid Mounted Hydraulic System, with 5 hp Vacuum Pump, (W885)

Deboner / Seperator

Beehive / Weiler S/S Deboner / Separator, Model RSBF02, SN 1251, with Dual Auger Feed, 18″ x 18″ S/S Feed Hopper, 460V 3 Phase, (2006 Mfg), Mounted on Casters, Includes Manuals, (W882)

Drum Breaders

Nothum S/S Drum Breader, Model NRP-40, SN 40751098, with 46″ W x 6 ft L Drum with Hydraulic Drives & Controls, 40″ W S/S Conveyor, Mounted on Casters, (Overall Dim. 12 ft L x 70″ W x 90″ H), Includes Additional 48″ L x 58″ W x 71″ H Portable S/S Conveyor System with Hydraulic Drives, (W886)

Nothum S/S Drum Breader, Model NRP-40, SN 40741098, with 46″ W x 6 ft L Drum with Hydraulic Drives & Controls, 40″ W S/S Conveyor, Mounted on Casters, (Overall Dim. 12 ft L x 70″ W x 84″ H), Includes Additional 48″ L x 57″ W x 61″ H Portable S/S Conveyor System with Hydraulic Drives, (W887)

Hydraulic Dumpers & Column Dumper

Carnitech A/S 7 ft H S/S Electric Column Lift System, SN 0354, 230/440V 3 Phase, with 26″ W x 21″ L Lift Attachment, Mounted on Casters ,Aprox. Lift Height 82”, (Overall Dim. 10 ft H x 4 ft W x 53″ L), (W891)

FPEC Pivot Type S/S Hydraulic Dumper, Model HLD725, SN 1907, with 48″ W x 48″ L x 71″ H Dump Area, with Separate Hydraulic Pump, (W892)

Metal Detectors

Safeline S/S Metal Detector System, Model PPH-13X05-55-100-300-H, SN 34040, with 11″ W x 4 3/4″ Opening with Digital Read-Out, Mounted on 4 ft L x 38″ H S/S Power Belt Conveyor Frame, with 11″ W Intralux Type Belt, with Leeson 1 hp / 1725 rpm S/S Clad Drive Motor, 115/230 V Single Phase with Controls, (W879)

Safeline S/S Metal Detector System, Model PPH plus / 14X03 / 55 / 300-800 / HD / V3, SN 45745, with 13″ W x 1 3/4″ Opening with Digital Read-Out, Mounted on 52″ L x 37″ H S/S Power Belt Conveyor Frame, with 13″ W Intralux Type Belt, with Dayton 1/6 hp, 115 V Single Phase with Controls, (W880)

Safeline S/S Metal Detector System, Model PPH / 18X03 / 55 / 100-300 / HD, SN 34196 with 16″ W x 6 5/8″ Opening with Digital Read-Out, Mounted on 58″ L x 51″ H S/S Power Belt Conveyor Frame, with 16″ W Intralux Type Belt, with Leeson 1/.75 hp / 1750/1450 rpm S/S Clad Drive Motor, 230/190 V 3 Phase with Controls, (W881)

S/S Hoppers

FPEC 60″ W x 60″ L x 36″ D S/S Feed Hopper, Model VFH86, SN 6244, with 6″ Discharge, Mounted on S/S Frame, with On-Board Load Cell Control Panel & Load Cells, (Overall Dim. 61″ L x 60″ W x 61″ H), (W890)

RMF 6 ft W x 6 ft L x 58″ D S/S Feed Hopper, Model CT600, SN 32724, with 6″ Clamp Type Discharge, Mounted on S/S Frame, (Overall Dim. 80″ L x 80″ W x 73″ H), with Load Cells & Controller, (W888)

FPEC 63″ W x 63″ L x 49″ D S/S Feed Hopper, Model VFH86, SN 7940, with 6″ Discharge, Mounted on S/S Frame with Casters, (Overall Dim. 68″ L x 64″ W x 67″ H), (W889)

Pumps

Tri Clover Type S/S Centrifugal Pump with 2” x 1.5” CT S/S Head, FHP 2/1.5 hp 1740/1440 RPM S/S Clad Motor, 208-230 / 460V 3 Phase, (Note: Missing Back Plate, Clamp & Seal Kit, (W897)

***MORE PUMPS WILL BE ADDED***

Bundy Eagle Series Dough Batch Mixer

2016 Bundy Baking Solutions Eagle (Shaffer) Horizontal Single Sigma Arm Dough Mixer, Model Eagle SA3, S/N 151015, Rated Capacity 800 LBs / 363 KG, 17.8 cu ft / 504 L, 40 RPM Agitator Speed, DOM: September 2016 (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

S/S Control Cabinet for Mixer with CompactLogix L24 ER PLC, Allen Bradley PowerFlex 755 VFD (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

(2) 2016 Shaffer S/S 13 Cubic Foot Portable Dough Trough for Mixer, Model DT13, 47″ W, Mounted on Casters (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

2016 Quadro Comil

2016 Quadro G94 Comil, Model G94-0031, 700-2800 RPM, Sterling Electric 5-HP 1760 RPM S/S Motor, Includes Lenze AC Tech SMVector Frequency Inverter, Mounted on Casters, Date of Manufacture: October 2016 (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

Downstream Packaging

Bosch Doboy Flow Wrapper, S/N 412703, with Servo Drive Controls, 65 Packages Per Minute, Includes Change Parts, 480 Volt

Doboy Flow Wrapper, Model Microtronic, S/N 96-18786, with Video Jet Date Coder D13112133TZH, SCREEN: 8.4 CLARITY, Gast MFG Corp Regenair Vacuum Pump, Model R3105-1, 53/44 CFM (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

Econoseal Spartan Horizontal Cartoner, Model 10234, S/N 10670, MicroLogix 1000 PLC (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

2016 Econoseal Mini Monoseal Semi-Automatic Carton Flap Glue Sealer Model 10302, S/N 10672, 220 V, DOM: 12/15/16 (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

Mettler Toledo Metal Detector with Reject Station, Model Sartorius Victus C, S/N 7-1348-16

47″ Diameter Rotary Accumulation Table, Model LT-48, S/N 00001, With Variable Speed Control (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

BestPack Tape Case Sealer, Model MSD 22-2, S/N 091040 (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

Sojet Box Coder, S/N 202059, Mounted on Case Conveyor (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

Product Conveyors

Additional

(2) 4-Drum IBC Electrically Heated Hot Box (Used to Heat Product in Drums)

(2) Sahara Industrial Ovens 2-Drum Hot Box (Benko Products), Model 10E4-CS, S/N J131616B & S/N J131616A, (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

2016 Carrroll Coolers 11′ x 17′ x 8’6″ H Walk-In Cooler, S/N CI-259258, Cam-Locking Style Wall Panels with Lag-Down Style Cealing Panels, 2-Fan Evaporative Blowers, 60″ x 84″ H Cooler Door, 12680 BTU, 120V, 1-Phase, DOM: 9-8-2016 (Located in Pittsburgh Approximately 15 Minutes From M Davis Group Auction Showroom)(Sold Subject to Confirmation)

Barr Refrigeration Cooler

(6) S/S Tables

Uline Pallet Jacks

2014 Multivac Model R535 Horizontal Form Fill and Seal Thermoformer

• Multivac Model R535 Horizontal Form Fill and Seal Thermoformer. Has dual web arbors, (3) manual load sections with load areas measuring 140″ L X 25″ W (each), also includes BUSCH vacuum and flush pumps. Has Multivac direct-web printing system with VideoJet printer. Machine currently set on 12″ diameter cutting dyes. Includes Schlumpf hydraulic assisted film reel loader. Allen Bradley controls. Serial no.: 178370. Built: 2014.

2014 Treif Model 660+ Meat Slicer & Blade Sharpener

• 2014 Treif Slicer, Model Divider 660+. 320 x 130 mm / 280 x 160 mm infeed chamber. Serial # 660000 17869 120022, Built 2014. (Located in Chicago, IL)
• Treif Blade Sharpener, Model SD 380. Serial # 243002.61857.103001, Built 2007. (Located in Chicago, IL)

(9) 2016 – 2014 Sesotec X-Rays

• (3) NEW IN CRATE, NEVER INSTALLED & (6) 2016 – 2014 X-Ray Food Inspection Systems, Raycon Sesotec X-Rays, Model 450/200, 100-160 PPM Capacity, Designed to be used on Pizza Lines

Additional Items Including:

• Sani-Matic Clean Out of Place Tank, Model PWJ-300. Stainless Steel, Horizontal. Trough approximate 98″ long x 24″ wide x 28″ deep. Includes 7.5 HP pump, electric heater, diaphragm pump, and control panel with chart recorder. PO # 123233. (Located in Chicago, IL)
• Sani-Matic Clean Out of Place Tank, Model RWJ-250. Stainless Steel, Horizontal. Trough approximate 120″ long x 24″ wide x 21″ deep. Includes 7.5 HP pump with electric heater, diaphragm pump, and control panel. PO # 115994, Item # 180337. (Located in Chicago, IL)
• APV Crepaco Liquiverter, approximately 25 gallon, Serial # E-4879. Mounted on (4) stainless steel legs, driven by an approximate 25 HP motor. (Located in Chicago, IL)
• RO System with Controls & Pump, Rated at 6-GPM
• SSI Plastic Shred System with Shredder, Elevating Conveyor, Exit Conveyor & Controls with Touch Pad
• Electric Film Roll Lift
• 2014 Mettler Toledo Beltweigh Checkweigher
• Kanemiya Plastic Bag Washer, Model KSW1545, with rubber pleated inclined feed conveyor. Cut costs and achieve zero landfill. Cleans 500-600 pound of plastic film or film and foil bags in one hour using only eight gallons of water. Serial # 1545008, Built 2011. (Located in Chicago, IL)
• Wolverine Corporation Jetzone Dryer/Oven “Cheese Melter”, Model SB 3 5×11 51. .8MMBTU Maxon Natural Gas Burner Located in the Cheese Melter’s Combustion Chamber Designed to Lightly Melt Cheese Particles on the Top of Pizzas or Pizza Slices. Includes (1) 42” Wide Omni-Grid Conveyor Chain and Sprockets at Controlled Speeds up to 80’ per Minute., (1) Conveyor Hydraulic Drive Motor, (2) Integral Stainless Steel Circulation Fans, (2) 20 H Fan Motors, Control Cabinets with Honeywell UDC 3000 Temperature Controller. Wolverine Project # 9656, Built 1997. MANUAL & DRAWINGS INCLUDED. (Located in Chicago, IL)
• Rademaker Den Boer Infra Red Cheese Melting Oven and Conveyor, Natural Gas. “Open Baking Tunnel” with 14 independently-functioning burners, divided into 4 groups which are positioned above the product to be heated. Heat-resistant Product Transport Conveyor Equipped with a Omni-grid Belt. 1000 BTU/ft3 Gross Heating Value. 341 BTU/s Nominal Input Rating. Includes Control Cabinet, Blower, and Various Valves and Piping. Built 2005. (Located in Chicago, IL)
• Jackson & Church Flexaire Furnace, Model SDF-60-GFI. Input BTU 750,000, Output BTU 600,000. Air volume to 10,900 CFM. Serial # A06-575. (Located in Chicago, IL)
• Haskris Portable Refrigerated Water Cooled Chiller, Model R250. Serial # HB20429. (Located in Chicago, IL

Formax F26 Forming Machine