Kraft Heinz Wet Mix Cheese Floor @ MDG Auction Showroom v2.0 – Most Major Items Immediately Available Prior to Auction

Crystallizers:

(2) DCI 7,500 Gal. S/S Vertical Jacketed Tank, S/N JS1243B, S/N JS1249A with Top Mounted Agitation Motor & Vertical S/S Internal Tank Agitatoin, Internal Tank Dims.: Aprox. 120″ Dia. x 165″ Tall, Jacket Volume 22 Gal., J-MAWP 150 PSI @ 100 F, with Slopped Bottom

(4) Cherry-Burrell 7,500 Gal. Vertical Jacketed Tank, S/N E-216-97, S/N E-219-97, S/N E-217-97 & S/N E-218-97 Max. Working Pressure, Heat Exchanger: 220 PSI @ 200 F, Minimum Design Metal Temp., Heat Exchanger: -20 F 200 PSIG, NAT’L BD. Nos.: 4705, 4708, 4706 & 4707 with Top Mounted Vertical Agitation & Agitation Motor

Processors:

2010 GPE 600 Gal. S/S Processor, M/N 600U79, Nat’L Board Number: 12038, MAWP 100 PSI @ 338 F, MDMT -20 F @ 100 PSI, with SEW Top Mounted Agitation Motor, with S/S Vertical Agitation, with Load Cells & Fairbanks Digital Read Out, Overall Tank Height: Aprox. 156″ Tall, with S/S Platform, Overall Platform Dims.: Aprox. 90-1/2″ L x 90-1/2″ W x 93″ H (Platform to Ground), with Handrails & Ladders, with Safety Gate

2004 Feldmeier 1,000 Gal. S/S Processor, S/N E-160-04, Jacket MAWP 100 PSI @ 175 F, Min. Design Metal Temp. -20 F @ 100 PSI, Mounted on S/S Legs & Load Cells, with Fairbanks Digitial Read Out, with Cone Bottom, Tank Internal Dims.: Aprox. 48″ Tall x 80″ Dia., with Dual CIP Spray Balls, with Top Mounted Agitatoin Motor with S/S Agitation

Mixing Tanks:

DCI 1,000 Gal. S/S Single Wall Cone Bottom Tank, S/N 98-D-57423, with Reliance 3 hp Top Mounted Agitation Motor, with S/S Side Sweep Agitation, Dome Top, Overall Height: Aprox. 150″ Tall, with S/S Side Platform, with S/S Hand Rails & Grating (SEMI BULK 3)

DCI 2,000 Gal. S/S Single Wall Cone Bottom Tank, S/N 98-D-57422-A, with Reliance 5 hp Top Mounted Agitation Motor, with S/S Side Sweep Agitation, with Dual CIP Spray Ball, Dome Top, Overall Height: Aprox. 172″ Tall, with S/S Platform with Handrails & Grating, Tank Mounted on S/S Legs & Frame (SEMI BULK 2)

DCI 2,000 Gal. S/S Single Wall Cone Bottom Tank, S/N 98-D-57422-P, with Reliance 5 hp Top Mounted Agitation Motor, with S/S Side Sweep Agitation, with Dual CIP Spray Ball, Dome Top, Overall Height: Aprox. 172″ Tall, with S/S Platform with Handrails & Grating (SEMI BULK 4)

DCI 2,000 Gal. S/S Single Wall Tank, S/N 98-D-574240-P, with Dome Top/Cone Bottom, Mounted on S/S Legs & Load Cells, with Dual S/S CIP Spray Balls, with Reliance 1755 RPM Top Mounted Agitation Motor

(2) DCI 1,000 Gal. S/S Single Wall Vertical Tank, S/N JS961-B & S/N JS961-A, Dome Top/Cone Bottom, with S/S Legs Mounted on Load Cells, with Fairbanks Digital Read Out, with Baldor 3 hp Top Mounted Agitation Motor, 208-230/460 Volts, 3 Phase, with Dual CIP spray Balls

St. Regis Aprox. 1,000 Gal. Single Wall Tank, S/N 11407, Dome Top/Cone Bottom, Mounted on S/S Legs & Load Cells, with Fairbanks Digitial Read Out, with Top Mounted Agitation Motor, Internal Tank Dims.: Aprox. 57″ Dia. x 70″ Tall

(3) DCI 2,000 Gal. S/S Single Wall Tank, S/N 90-D-40569-B, S/N 92-D-44768, S/N 92-D-44569-A- with Dual CIP Spray Ball, Dome Top/Cone Bottom, Mounted on S/S Frame & Load Cells, with Fairbanks Digital Read Out, with Top Mounted Agitation Motor, with S/S Man Ladder

Aprox. 2,000 Gal. S/S Single Wall Vertical Tank, Tank Internal Dims.: Aprox. 83″ Tall x 88″ Dia. with Dual 4-Prop Vertical S/S Agitation, Dome Top/Slope Bottom, with Top Mounted Agitation Motor

Likwifier:

Breddo 300 Gal. S/S Likwifier, M/N LOR, S/N 315752-1 0540065, with Reliance 60 hp Offset Motor, 1780 RPM, Mounted on Load Cells

COPs:

Sani-Matic S/S COP Tank, M/N COP-1321, S/N 180422, with 10 hp Centrifugal Pump, with Side Jet, Internal Dims.: Aprox. 194″ L x 20″ W x 18″ Deep, with Associated S/S Valving, Mounted on S/S Portable Frame

Sani-Matic S/S COP Tank, M/N UWJ-175, with Tri-Clover 7-1/2 hp Centrifugal Pump, Internal Dims.: Aprox. 122-1/2″ L x 20-1/2″ W x 17″ H, Mounted on S/S Frame

Liquid Recon System:

S/S Liquid Recon Hopper, with S/S Single Wall Design, Mounted on S/S Frame & Load Cells, Includes S/S Control Panel with Air Outlet Box & Additional S/S Panel, with Fairbanks Read Out & I/A Series Flow Meter Read Out, with Associated Piping & Valveing, Includes All S/S Platform, with S/S Grating & Handrails

American Process Systems S/S Filter Housing, M/N NFBD, S/N 3561, with S/S Platform, with S/S Hand Rails & S/S Grating

American Process System S/S Filter Housing, M/N 200 RDC, S/N 3774-1, with Top Mounted Motor, Mounted on S/S Legs

20 hp Tri-Blender, with Baldor 1765 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 5″ x 3″ Clamp Type Inlet/Outlet, Mounted on S/S Sliding Frame

Coffing 2-Ton Overhead Electric Hoist, with S/S Super Sac Attachment, with Ceiling Mounted I-Beam

Emulsion Skid:

20 hp Emulsion Skid, with S/S Vessel Head, Aprox. 28-1/2″ Dia., with Buusch Vacuum Pump, with Additional Drive, Mounted on S/S Frame (NOTE: Addition Drive Missing Head–See Photographs)

Semi – Bulk Systems Hopper Tanks:

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #1) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #2) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #3) (NOTE: Does Not Include S/S Frame & Digital Read Out Missing Screen)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #4) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #5) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #6) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #7) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Fairbanks Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #8) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #9) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, Overall Height of Hopper: Aprox. 110″ H (HOPPER #11) (NOTE: Does Not Include S/S Frame & Missing Digital Read Out)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, with Mettler Toledo Digital Read Out, Overall Height of Hopper: Aprox. 110″ H (HOPPER #12) (NOTE: Does Not Include S/S Frame)

Semi-Bulk Systems Inc. S/S Single Wall Hopper, Mounted on Load Cells, Overall Height of Hopper: Aprox. 110″ H (HOPPER #13) (NOTE: Does Not Include S/S Frame & Missing Digital Read Out)

Additional Items:

(25+) Positive Displacement, Centrifugal & Assorted Pumps

Air Valves

Powder Handling Equipment and Bag Unloaders