Chat with us, powered by LiveChat

Kraft Heinz & Other Major Manufacturer’s Food & Beverage Processing Equipment Auction

Featured Auction

 

AUCTION  |  ONSITE AND ONLINE  |  October 18, 2016
LOCATION
: 2300 Palmer Street, Pittsburgh, PA 15218

FEATURED LOTS GENTLY — USED LIKE NEW!!! 

  • LOT 48:  IKA Model DR2000/20, Dispax Reactor, High Shear 3 Stage Inline Disperser-Milling Machine, Coarse to Superfine Generator Capable, 3″ Inlet, 40 hp Motor at 3,600 rpm,CIP & SIP, Portable (Possible Applications Include: Edible Oil Refining, Viscosity Control, Fuels, Personal Care Products)
  • LOT 98:  Applied Chemical Technology 300N S/S Fluid Bed System, Model 300N, S/N 4890901, Batch Size Range 5L to 20L, Fluidization Velocity 40 to 500 feet per minute, Inlet Air Temperature Ambient to 250 Degrees F., Fluid Bed Area 0.44 sq.ft. includes Baldor 3 hp Motor, 3460 RPM, 230/460 V, 3 Phase, Filters, Gaskets and Housings (Designed for Small Scale Spray Coating, Granulation and Drying of Particles and Powders)

FOGG FILLER 

  • FOGG Rotary 6-Head Filler with 3-Head Screw Capper, Model EASI-63, Complete with Cap Feeder / Orientor and Chute, Currently Set-Up to Run 12-Oz Round Bottles, 20-Oz Change Parts, S/S Control Panel Equipped with Allen Bradley Pico 1760-L Controller, (3) AB Power Flex 4 VFDs, Commissioned and Tested but Never in Production as Intended Project was Canceled (Mary)

Lodige 50 Liter Batch Mixer

  • 2011 Lodige 50 Liter Batch Mixer, Model L 50, S/N 16592, Equipped with 6-Paddle Horizontal Mixer and Side Mount 4-Blade Mixer, Spare 4-Paddle Mixer Included, Horizontal Paddle Mixer Operates with SEW 4KWS1, Duty S1, 60 Hz, 230/460 V Motor, Allen Bradley Powerflex 70 7-1/2 HP VFD (Belived to Control 6-Paddle Mixer), Schneider 5 HP VFD (Believed to Control 4-Blade Side Mount Mixer), Mounted on Portable S/S Frame with Wheels, 460V, 60 Hz, Electronic Technical Documents Included (Mary) http://www.directindustry.com/prod/lodige/product-20200-1164183.html

GRINDERS, SHREDDERS, AND SLICERS   

  • Urschel Dicer with Two Cutting Stations / Capabilities, S/N 20001, Initial Dicer Plate: 12”, Secondary Dicer Plate: 7”, Initial Dicer Equipped with 1 HP, 1725 RPM, 208 -220/440 Motor, .Secondary Dicer 2 HP, 1760 RPM Motor, 208 – 220/440, Mounted on S/S Frame (ST 41)
  • Fitz Mill All S/S Hammer Mill, Model DKAS012, S/N 12202, with Approx. 13” L x 11” W S/S Head Driven by 30 HP, 3500 RPM Baldor Motor, Approx. 23 ½” W x 31” Deep Infeed Hopper with Approx. 6” Dia S/S Auger Driven by Baldor 3 HP, 1760 RPM Motor, 208-230/460 Volt (ST #42)
  • Urschel Comtrol Cheese Shredder, Model 1700, S/N 2291, Equipped with Pacemaker 30 HP, 2955 RPM, 200/208V Motor, Approx.Dia of Blade 6″, Mounted on Portable S/S Skid with Wheels (Mary)
  • Urschel Comtrol Cheese Shredder, Model 1700, S/N 1686, Equipped with Pacemaker 30 HP, 3545 RPM, 230/460, Approx. Dia. Of Blade 6″, Mounted on S/S Skid (Mary)

HOMOGENIZERS  

  • Gaulin Laboratory Homogenizer, Model 15MR-8TBA, S/N 88810838, Single-Piston Design, 8,000 PSIG, Equipped with
    Pressure Gauge, Portable Unit Mounted on S/S Frame with Casters, General Electric 3 HP Motor, 1760 RPM, 230/360 V
    (Mary #29)
  • Single Piston 2-Stage Homogenizer (More Information to Come)
  • WCB 3-Piston High Pressure Plunger Pump, Model 3000HD6, S/N 19521097, 3,600 PSIG, 1,000 GPH, 50 HP Motor,
    Plunger Size 1.25, Anderson Pressure Gauge (ST 30)
  • Bean Pumping & Spraying Equipment High Pressure Pump, Model M0608, S/N 320208, Part Number , 3-Piston, 8.3
    GPM, 3,400 PSIG, SEW 10-HP Motor, 490/1875 RPM, 230/460 V (Mary # 31)

MIXING, PROCESSING, AND STORAGE TANKS

  • Feldmeier 20 Gallon Open-Top Sloped-Bottom Processing Tank, S/N E-563-98, Lightnin Prop Style Top-Mount Agitation (3-Blades), 100 PSI @ 350 Degree F, 100 PSI @ -20 Degree F (#1 Mary)
  • Cherry Burrell 50 Gallon Dome-Top Sloped-Bottom Vacuum Processing Tank, S/N 84E-13, Top-Mount Side and Bottom Sweep Agitation, Reliance ½ HP / 1725 RPM Agitator Motor, 35 PSI @ 300 Degree F, 15 PSI 300 Degree F, Portable Vessel with Bolted Lid Mounted on S/S Frame with Casters, National Board # 2398 (#2 Mary)
  • Cherry Burrell 50 Gallon Dome-Top Sloped-Bottom Vacuum Processing Tank, S/N 85E-28, Top-Mount Lightnin Prop Agitation, Lightnin 1/3 HP 1725 RPM Agitator Motor, 60 PSI @ 320 Degree F, 15 PSI @ 320 Degree F, 100 PSI @ 320 Degree F, Portable Vessel with Bolted Lid Mounted on S/S Frame with Casters, National Board #2564 (#3 Mary)
  • Walker 250 Gallon Flat-Top Sloped-Bottom Single-Wall Holding Tank, Top-Manway, Door Missing (#4 Mary)

TEMPERING SYSTEM 

  • Skid-Mounted Portable All S/S Tempering System, Approx. 30 Gallon Side Sweep-Scrape Agitation Jacketed Tank, 1 HP & 1700 RPM SEW Agitator Motor, WCB 018 U2 Positive Displacement Pump, S/N 44307307, 1-1/2” Clamp Type S/S Head, 2 HP & 1800 RPM SEW Motor, Watlow Immersion Heater, S/S Control Panel, Previously Used as Chocolate Tempering System (#5 Mary)

LEE COFFEE FILTERING AND PROCESSING TANK

  • Lee Approx. 90 Gallon Dome-Top Sloped Bottom Jacketed Filtering and Processing Tank, Model 50U7S, S/N 25587-1, Equipped with Internal Heating Coil and Filters, Jacket 100 PSI @ 338 Degree F, -20 @ 100 PSI, Mounted on S/S Skid (#6 Mary)

CENTRIFUGAL DEAERATOR

  • Dole Centrifugal Deaerator, Model 55, S/N D626, Approx. Tank Dimensions: 27-1/2” Dia. x 26” Deep, 5 HP, 1740 RPM (ST #43)

COP & CIP TANKS 

  • Sani-Matic Jet-Spray COP Tank, Model RWJ-200, Item # 180428, 98” L x 24” W x 21” D Centrifugal Pump with Baldor 2 HP Motor (Mary #49)

KETTLES 

  • Groen Approx. 10 Gallon Vacuum Jacketed Tilt Kettle, Model TD2/TA/2-40, S/N 105670, 316L S/S, Dual-Motion Sweep-Scrape & Prop Agitation, 50 PSI @ 300 Degree F, Full Vacuum Internal Rated at 30 PSI, Fully Enclosed Vessel with Bolted Top (#10 Mary)
  • Groen Approx. 40 Gallon Jacketed Tilt Kettle, Model DEE/4-40, S/N 130084, Dual Motion Sweep-Scrape and Prop Agitation, Dresser ½ /.75 hp, 1725/865 RPM Agitator Motor, 50 PSI @ 300 Degree F, 480/3/60 (Mary #11)
  • Hamilton 50 Gal. S/S Jacketed Kettle, Model/Style SA, S/N D-5876-2, 90 PSI @ 320 Degrees F, National Board Number:  326, -20 Degrees F @ 90 PSI (Mary #9)
  • Groen Approx 60 Gallon S/S Jacketed Ketlle, Model RA-60, S/N 03678-1, 100 PSI @ 338 Degree F, 100 PSI @-20 Degree F, Equipped with Sweep-Scrape Agitation, Dual-Paddles / Baffles, 3 HP / 1700 RPM SEW Agitator Motor with Snuggler Drive, National Board # 139475 (#7 Mary)
  • Chester-Jenson Aprox. 70 Gal. Processor Kettle, Model X70N2.5, S/N 9620-P, Built 1996, Rated 100 PSI @ 100 Degrees F, Bottom Supported Shaft with Anchor Agitator and Bottom Scrappers, 3/4 hp Gear Motor, with S/S Funnel, Includes Feed Tank, Waukshua 10 hp Positive Displacement Pump, Model 060, with PowerFlex Drive, Misc. Piping and Valve, All Mounted on S/S Frame and Casters (#143 KH)
  • Hamilton Approx. 100 Gallon All S/S Jacketed Kettle, Model / Style SA, S/N C-8186-2, 90 PSI @ 320 Degree F (#7 Mary)
  • Groen Aprox. 10 Gal. S/S Mixing Station, M/N TD/2-40, S/N 1975, Mounted on S/S Portable Frame, Half of the Mixing Pot is Jacketed (KH107)
  • Greon Aprox. 20 Gal. S/S Jacketed Kettle, M/N N-20, S/N 31665-1, National Board: 133241, 100 PSI @ 338 F, Built 1987 (KH183)
  • Chester-Jenson Aprox. 80 Gal S/S Jacketed Tank, S/N 9715-P, Cone-Bottom, On S/S Legs and Casters, 3/4 hp Agitation (KH115)
  • Groen Aprox. 20 Gal. Kettle, Model N20SP, 316L S/S, S/N 26448(KH175)

HORIZONTAL BLENDERS AND COOKERS 

  • American Process Systems Approx. 60 Gallon Portable Dual Paddle Blender, M/N FZCM-2, S/N 4627, SEW 3 HP / 1700 RPM Agitator Motor, Top-Mounted S/S Filter, Approx. Interior Dimensions:26” L x 23” W x 24” D, Mounted on S/S Frame on Casters with S/S Control Cabinet (Mary #12)
  • APV Crepaco Blender, S/N G-5090 with Aprox. 20 Cubic Ft., Jacketed Trough, Dual Wing Mixing Blade, 5 PSI @ 350 F, -20 F @ 75 PSI, Sprayball, Agitation Motor, Tri-Clover Air Valve, Hinged Top Cover, Mounted on S/S Legs and 1.6/3 hp 2-Speed Gear Motor (KH #98)
  • Day Ribbon Blender, Model IND-17, S/N 76-41, Approx. Internal Dimensions: 48” L x 21-1/2” W x 24” D,  5 HP / 1750 Agitator Motor (ST # 17)
  • Lee Jacketed Paddle Blender, S/N 652-S, Approx. Internal Dimensions: 55” L x 33” W x 24” D, 150 PSI @ 366 Degree F, Mounted on S/S Skid, National Board # 122, Missing Drive Motor (ST #13)
  • AMFEC Ribbon Blender, Model 510, S/N 950368, Leeson 10 / 7.5 HP, 1760 / 1450 RPM Agitator Motor, Approx. Interior Dimensions: 73” L x 38” W x 39” D, 440V (ST #14)
  • S/S Ribbon Blender, SEW 7-1/2 HP, 1730 RPM Agitator Drive Motor, Approx. Internal Dimensions: 71” L x 36” W x 42” D, 460 V (ST # 15)
  • American Process Systems Jacketed Ribbon Blender, Model DRB18, S/N 70795, Approx. Internal Dimensions: 59” L x 24” W x 27” D, 125 PSI @ 350 Degree F, Shell Thickness: 187, Jacket Shell Thick 060, SEW 7-1/2 HP, 3587 RPM Agitator Drive Motor (ST # 16)
  • American Process Systems S/S Blender, M/N DRB-5, S/N 3807, Blade Comparment Dimensions: 12 Cubic Feet, 4″ CBO with Manual Plug Valve, Hinge Top Cover, 2″ Diameter Shaft, Alter Ribbon 1/4″ Wide x Aprox.1/4″, Inner Ribbon 1 1/2″ Wide x 1/8″ Thick, 5 hp Variable Speed Gear Motor, Standard Packing Glands, Mounted on S/S Legs with Casters, with Furnas Safety Switch (KH121)
  • (2) Twin Shaft Mixer, Aprox. 5 Cubic Ft., Stainless Steel, 2 hp Variable Speed Motor (KH 123 and 125)

POWDER HANDLING 

  • Applied Chemical Technology 300N S/S Fluid Bed System, Model 300N, S/N 4890901, Batch Size Range 5L to 20L, Fluidization Velocity 40 to 500 feet per minute, Inlet Air Temperature Ambient to 250 Degrees F., Fluid Bed Area 0.44 sq.ft. includes Baldor 3 hp Motor, 3460 RPM, 230/460 V, 3 Phase, Filters, Gaskets and Housings (Designed for Small Scale Spray Coating, Granulation and Drying of Particles and Powders) (KH # 82)
  • Sweco Vibro-Energy Screener Base, Model XS48S66, S/N 600669-A1195 with 2.5 hp, 1155 RPM Motor (KH 85)
  • (10) New Sweco Screens, (6) S/S Screen Clamps, Screens: 230T/200, 230T/16T, 230T/16T, 74T 12/10, 74T 12/10, 84T 05/11, 200 Mesh, 70 Mesh, 60 Mesh, 60 Mesh (Most Approx 44” Diameter)
  • Burdosa Dynamic Loop Mixer – Emulsifier, Model MISCHER GR80, S/N 2408018590 Mounted on S/S Frame with Jacketed Mixing Chamber Control Panel & Casters, Lenze Frequency Converter, 3 Phase (KH #28)
  • Sturtevant Portable Roll Crusher, Model 8 x 5, S/N 1518, Mounted on Skid with Wheels, 3” L x 7-1/2” W x 4” D Product Hopper, Allen Bradley Starter, Baldor 2 HP / 1725 RPM Motor, 208-230/460/60/3 (Mary # 20)
  • Sturtevant Portable Roll Crusher, Model 8 x 5, S/N 1519, Mounted on Skid with Wheels, Baldor 2 HP / 1725 RPM Motor, Allen Bradley Starter (Mary #21)
  • Electrostatic Flavoring System, S/N NALW2417, Mounted on Portable S/S Skid with S/S Funnel, Controls and Rospen LBC1000 Weighing and Metering Touchpad Display (KH #134)
  • Acrison “Weight Loss Differential” Powder Feeder Mounted on Vibratory Frame, Model 403-800-250-105Z-F, S/N 85298-01, Hopper Dimensions:  17” L x 17 ½” W x 52” Deep (Mary 41)
  • Thomas Muller S/S Auger / Incline Screw Conveyor, S/N C-51444, Mounted on S/S Skid with S/S Control Panel, Hydraulic Lift, Approx. Hopper Dimensions: 29” L x 28” W x 19” D, 6” Diameter S/S Auger, Approx 127” L Incline Section, US Motors 3 HP / 1765 RPM Auger Motor (Mary #18)
  • American Process Systems S/S 2-Compartment Powder Hopper, Model FBD, S/N 2083, Approx Front Compartment Dimensions: 41L x 31” W x 25” D, Equipped with Baldor 1-1/2 HP / 3450 RPM Motor, AB Starter (Mary #22)
  • Geo Olney S/S Vibratory Shaker Deck / Screener, Model 1982, S/N 942-24, Approx. Deck Dimensions: 72” L x 26” W, Feeds into Cone Hopper Directly Below Deck, 1-1/2 HP / 1725 RPM Baldor Motor, Mounted on S/S Frame (ST #24)
  • Marchant Schmidt All S/S Cone-Bottom Dust Collector Bag House, ID # 11991001, with (7) Bags, Portable Unit Mounted in S/S Frame with S/S Control Panel on Casters, Baldor 5-HP Motor, 203-230/480, 3450 RPM, Approx. Bag House Dimensions: 63” H x 28” D (ST #30)
  • All S/S Cone-Bottom Dust Collector Bag House with (9) Cloth Bags, Approx. S/S Hopper Dimensions: 44” L x 44” W x 46” H, Approx. Overall Dimensions: 50” L x 45” W x 115” H  10” L x 10” W Square Bottom Outlet Valve, 1/3 HP Baldor Motor (Mary #26)
  • All S/S Cone-Bottom Dust Collector Bag House with Approx. (19) Bags, Approx. Bag House Dimensions: 37” W x 106” H, Approx. Overall Dimensions: 117” H, Mounted on All S/S Frame (Mary #27)
  • Niro Atomizer, Model VB8204, Approx. 10” Diameter x 58” L, Equipped with Martin Electric vibrator, Missing Parts, (Mary # 39)
  • Nu-Con All S/S Powered Rotary Airlock Valve, Model CV1250DEM, S/N 8006535 with 13″ Inlet/Outlet Flange, 46″ Adjustable Rails and 1 hp Drive Motor, 1800/900 RPM, 480 V, 3 Phase, 124 cu.ft., (HD # 132)
  • Nu-Con All S/S Powered Rotary Airlock Valve, Model CV1250DEM, S/N 8006538 with 13″ Inlet/Outlet Flange, 46″ Adjustable Rails and 1 hp Drive Motor, 1800/900 RPM, 480 V, 3 Phase, 124 cu.ft., (HD #133)
  • Aprox. 13″ x 19″ x 24″ H S/S Reducers with Flanged Connectors (HD # 138)
  • Aprox. 12-1/2″ x 19-1/2″ x 30″ H S/S Reducers with Flanged Connectors (HD #139)
  • Aprox. 13″ x 19-1/2″ x 72″ H S/S Reducer with Flanged Connectors including (2) 6″ and 8″ S/S Pipe Sections (HD #139A)
  • Aprox. 11″ x 24-1/2″ Anag Anti Powered DeScaler, Type AA-200-AE/D, S/N T00-1121 (HD # 140)
  • Aprox. 11″ x 24-1/2″ Anag Anti Powered DeScaler, Type AA-200-AE/D, S/N T00-1121 (HD # 141)
  • Aprox. 11″ x 24-1/2″ Anag Anti Powered DeScaler, Type AA-200-AE/D, S/N T00-1122 (HD # 142)
  • Aprox. 11″ x 24-1/2″ Anag Anti Powered DeScaler, Type AA-200-AE/D, S/N T00-1120 (HD # 143)
  • PPI Technologies Global S/S Tray Hopper Incline Conveyor Pouch/Tray Filler with Aprox. 10″ L x 7″ W sx 3-1/2″ Deep Conveyor Cups, Aprox. 5-1/2″ L x 4″ W Filling Opening, Mounted on Portable Frame (Snap #115)

V-BLENDER

  • A & M Process Equipment Portable all S/S V-Blender, Model ATS 50, S/N 400055, Approx. 50-Cubic Feet, Approx. Internal Dimensions Per Chamber (Total of 2 Chambers): 40” L x 20” W, Mounted on S/S Frame with S/S Control Panel & Casters (Mary # 23)

PREMIER COCOA NIB GRINDER 

  • Premier Mill Portable S/S Colloid Mill, Model KCD, S/N CL4 – 0042, 4”, Mounted on S/S Skid with Wheels, Magnatek 7-1/2 HP Motor, 3450 RPM, Allen Bradley Starter, 230/460/3/60 (Mary #19)

AEROS CONTINUOUS AERATOR 

  • 2007 Aeros Continuous Aerator (Pin Rotor), Model Aerator A1000 2007014-01, 750L Capacity, 2-12” Outlet, 1765 RPM, 480/60 (Mary #34)

OAKES BEARING HOUSING MIXER/SHEARING PUMPS 

  • (5+) Oakes Bearing Housing and Rotor Stator Mixers
  • Oakes Bearing Housing Mixer, High Shear Rotor / Stator, Model 8 MBOA, S/N 232, Mounted on S/S Skid
  • Silverson High Shear In-Line Mixer, M/N 275LS, S/N 275LS3780, Stainless Steel 2 hp Motor (KH167)
  • Hydrocell 7.5 hp High Pressure Pump, M/N D15XASTHFEHF, S/N 289682, Gear Motor (KH146)
  • Jayhawk 3 hp Laboratory Colloid Mill with 350 RPM and Square D 30 Amp Safety Switch(LAKH39)

LAB MIXERS 

  • Paul O Abbe Double Arm Paddle Mixer, Mounted on S/S Skid with S/S Starter, Equipped with Baldor ½ HP Motor, 208-230/460/3 (Mary # 32)
  • Teledyne Readco Lab Double Arm Mixer, 1 Quart Capacity, Stainless Steel. Jacketed bowl, Sigma Blades,S/N 107711KH162 (KH162)

LAB CLEAN FILL HOODS 

  • Micro Thermic S/S Clean Fill Hood and Sterile Product Outlet with Automatic Filling Control includes Atmos Tech Hepa Filtration Unit, Model EL522-TT/SS, S/N 9687, 115 V, Single Phase (FMNT #103)
  • Micro Thermics S/S Clean Fill Hood, Mounted on S/S Frame with Casters, Includes Atmos Tech Hepa Filtration Unit, Model EL422-TT/SP/SP, S/N 8925, 115 V, (Mary #36)

FILLING EQUIPMENT 

  • Osgood 8-Station Cup Filler, Model 1001-D, S/N 03-461, Set-Up for 6″ Diameter Cups, with Allen-Bradley 10-Slot PLC Rack and Allen-Bradley PanelView, 480 Volts, NOTE: Missing Bowl and Pistons (KH 90)
  • 2005 Oden / Servofill 4-Head Benchtop Filler, Model SF MOD SP, S/N 3291, Currently Equipped with (1) Fill Nozzle, (1) Heavy liquor Nozzle, (2) Vacuum Nozzles, Mounted on Enclosed S/S Frame with Hepa Filtration System on Casters, WCB Size 15 Positive Displacement Pump, Clean Gear Progressive Cavity Pump, S/N 6-0295, S/S Control Panel with Micro-Logix 1500 PLC with Input Output 4-Slots (Mary #38)
  • 2004 Oden / Servofill 4-Head Benchtop Filler, Model SFHD MOD, S/N 3217, Currently Equiped with (2) Fill Nozzles & (2) Vacuum Nozzles,Mounted on S/S Frame Equipped with (2) WCB Positive Displacement Pumps, Model 018, S/N 34796203 & 34796103, 1-1/2” S/S Clamp Type Heads, S/S Control Panel with Micrologix 1500 PLC, (4) Input Output & Slots (Mary 40)
  • 2006 SAI / Flexifill Bag-N-Box Filler & Capper, S/N FLX-025, Previously Utilized to Fill and Cap Shelf Stable Products, Mounted in S/S Frame Equipped with (2) Bassaire Hepa Filtration Units, Model Cube, S/N 14314, 110 V, Online Flow Meter (Mary #37)
  • (2) Hassia Parts Consisting of Unwind Stand and Film Hydrogen Peroxide Treat System with Film Treating Tank, Controls including Yaskawa Servopak SGD-H-01BE (KH #126)

VACUUM SEALER

  • Smith SuperVac Dual Vacuum Sealer, Type GK290 with Seal Platform Dimension: Aprox. 24″ x 24″, 460 Volts including Spare Seal Platforms and Self-Contained Vacuum Pump (KH #62)

TUBE IN TUBE HEAT EXCHANGER (LOFATOR) 

  • Het Stempel B.V. Lofator Tube and Tube Heat Exchanger, Includes (3) Fristam and Centrifugal 7-1/2 hp Pumps, S/S Tubes  (HD #51) (U216)

ERIEZ METAL DETECTOR 

  • Eriez Metal Detector, Model EZDSP, S/N148058, Mounted on 81” L x 7” W Conveyor with Leeson ½ HP Motor on S/S Frame, Metal Detector Opening 11” H x 9” W (ST #50)

CHILLED WATER SYSTEM  

  • FIltrine All S/S Chilled Water System, Model PCP300-38AL-H/C, S/N 8868/00, 3 HP, 460V, Test Pressure: 300 LB High Side /150 LB Low Side (Mary #35)

(20+) POSITIVE DISPLACEMENT PUMPS 

  • WCB Model 15, 18U2, 34, 60, 130
  • Sine Pump Model SPS – 20

(30+) WCB POSITIVE DISPLACEMENT PUMP HEADS 

  • WCB Models 6, 15, 30, 34, 60

(10+) PROGRESSIVE CAVITY PUMPS 

  • Shanley Pumps S/S 1.6 HP Progressive Cavity Pump, Model ACNP 50.2 CXD, S/N 20668/2 AVU, 2” Inlet, 2”Outlet, Mounted on S/S Skid, Equipped with SEW 1.6 – 2 In Motor, 230/460/60
  • NEW LEWA DIAPHRAGM PUMP
  • 2008 NEW Lewa Diaphram Metering Pump, Model LDD4/LD2-HYG, 4 STAGES @ 429.92 L/HR-1 STAGE @ 112.74 L/HR-1 STAGE @57.44L/HR, 6-STAGE PUMP W/JORDAN CONTROLS (Mary #81)

SCRAPE SURFACE HEAT EXCHANGERS 

  • Young S/S Tubular Scrape Surface Heat Exchanger, Model 11452-1, S/N HB-3422, 6 Cubic Feet, High Pressure Tubular Unit, 400 PSIG @ 450 Degree F, -20 @ 400 PSIG, Heavy Bolted Construction, Equipped with SEW 5 HP, 1680 RPM Motor with Digital Speed Controller, Mounted on S/S Frame, National Board #3406 (Mary #44)
  • APV Crepaco Single Barrel Ice Cream Freezer, Model R-4448, S/N E-5969-1HD620 with Ammonia Refrigeration, Reeves 15 hp Variable Speed Drive (NOTE: Missing Complete Dasher Assembly and Covers) (LAKH100)

TANK AGITATORS 

  • Huge Assortment of Agitators and Drives
  • Scott Turbon Portable Mixer, Model PMS3A, Stainless Steel. Serial# 2486 (KH182)

S/S PRODUCT AND ACCUMULATION CONVEYOR 

  • S/S Portable Product Hopper with Cleated Incline Conveyor (Product Elevating Conveyor), Mounted on S/S Frame with Casters, Approx. Overall Dimensions: 112” L x 41” W x 99” H, Approx. Product Hopper Dimensions: 86” L x 23” W x 18” D, Elevator Inclines 85” (Total 99” from Ground), 26” W Conveyor Belt (ST #48)
  • Kiss Rotary All S/S Accumulation Table, M/N AT-42-A, S/N 4159, 42” Dia., 110 Volt (Mary47)
  • 100’s of Feet S/S Product Conveyor

DRUM PUMPS 

  • Graco Series F99A S/S Drum Pump (KH166)
  • Graco Series C92H S/S Drum Pump (KH158)