Food and Beverage Packaging and Processing Equipment Auction – Multiple Locations

RECENTLY ADDED – HIALEAH, FLORIDA

Sweco 18″ S/S Sifter Screener, Model LS18S533 (Located Hialeah, FL)

Small S/S Butter Churn with .65/.8 hp, 460 V (Located Hialeah, FL)

DTE Water Chiller, Model K-002, 3-BB4/S (Located Hialeah, FL)

Small 6-Plate and Frame Filter Press (Located Hialeah, FL)

New York City, New York

Gaulin MC-18 Homogenizer, Model 1500 MC18-3TPS, S/N 1797780, Two-Stage HVA Assembly, New 40 HP Soft Start Motor, New Wiring, Rebuilt and Never Placed Back in Service (Located in NYC)

Carson, California

Shionogi Qualicaps Capsule Filler. Model: 8S, Serial: L-104, Semi-Automatic Capsule Filler. Comes with 1 set of change parts (size 0). As shown in photos. (Located Carson,CA)

Stockton, California

COMPLETE GLYCOL REFRIGERATION SYSTEM: Includes–(1) Genuine Carlyle 125 hp 8-Piston Freon Compressor, M/N 5H80-A219, with Lincoln 1770 RPM Motor, 230/460 Volts, 3 Phase, with Furnas Soft Starter; (1) Genuine Carlyle 125 hp 8-Piston Freon Compressor, M/N 5H80-A219, with Lincoln 1782 RPM Motor, 230/460 Volts, 3 Phase, with Furnas Soft Starter; (1) Genuine Carlyle 125 hp 8-Piston Freon Compressor, M/N 5H80-A219, with Lincoln 1770 RPM Motor, 230/460 Volts, 3 Phase, with Furnas Soft Starter; (1) Vertical Refrigeration Vales Freon Accumulation System, NAT’L BD: #2197, MAWP 50 PSI @ 300 F, -20 F @ 150 PSI; (1) Horizontal RSD Freon Receiver Tank, Previously Received R407F; BAC Evaporator Unit, M/N VLG-225A, S/N 78-8914M, Belt No. 4-B90; (1) 2011 Frick 3-Fan Evaporator, S/N 300/620116.0003, 460 Volts, 3 Phase, Pro. #: 507281 (1) 2011 Frick 3-Fan Evaporator, 460 Volts, 3 Phase (1) 2011 Frick 3-Fan Evaporator, 460 Volts, 3 Phase, (Handling, Loading, & Site Management Fee: TBA USD) (LOCATED IN STOCKTON, CA)

Bryan Chiller, M/N 558JE16D000A2A0AAA, S/N 0314P0742, Cooling 174,000 (Handling, Loading, & Site Management Fee: TBA USD) (LOCATED IN STOCKTON, CA)

Santa Ana, California

SHANKLIN S24BL Semi auto Heat Sealer Hot Knife, 2015 – In good condition – (Load Fee $300) FOB CA 92705 (Located Santa Ana, CA)

SHANKLIN S24BL Semi auto Heat Sealer Hot Knife, 2008 – In good condition –(Load Fee $300) FOB CA 92705 (Located Santa Ana, CA)

SHANKLIN S24BL Semi auto Heat Sealer Hot Knife, 2007 — In good condition — (Load Fee $300) FOB CA 92705 (Located Santa Ana, CA)

New Haven, Connecticut

Lantech Model Q- Semi Automatic Q Series Pallet Wrapper, SN: QM001092 (LOADING FEE: $350.00) (Located in New Haven, CT)

Hialeah, Florida

Westfalia MM5004 Milk Centrifuge / Separator, Type 3 FM 66-6-0.86, 220 Volt, 600 RPM (Located Hialeah, FL)

Alpha Laval Milk Centrifuge/ Separator, Type S218M-50, Model 1954, Manufacture #4036248, Revolution Center 71 – 75 (Located Hialeah, FL)

Alpha Laval Milk Centrifuge / Separator, Type S218M-50, Model 1954, Manufacturer #4036251, Revolution Center 71 – 75 (Located Hialeah, FL)

Equipment Engineering Inc. Milk Centrifuge / Separator, Model 340, S/N 3702788 (Located Hialeah, FL)

Groen 500 Gal. S/S Kettle with 40 psi Steam Jacket, 20 hp Washdown Motor, 208/230/240 Volt, 60 hz., 3 Phase with High Sheer Homogenizer Mixer (Loading Fee $350) (Located Hialeah, FL)

Hamilton 150 Gallon Vacuum Scrape Surface Mixing Kettle with Steam Jacketed 90PSI, 2 HP 230/460v 3PH Motor (Loading Fee $450) — FOB Hialeah, FL 33016 (NOTE: May be additional charge for crane)

Hamilton 200 Gallon Vacuum Scrape Surface Mixing Kettle M# SA, S/N D-2797. with Steam Jacketed 90PSI, 3 HP 230/460V (Loading Fee $350) FOB FL HIALEAH 33016 (NOTE: May be additional charge for crane)

APV 300 GAL. LIKWIFIER, 316L S/S construction, The outer jacket has been cut into three sections to repair leaks in the 75 psi dimple jacket., 60 hp motor and counter rotating side and bottom agitation. (Loading Fee $350) FOB Hialeah, FL)

25 Cu Ft JAYGO Double Ribbon Blender, Stainless Steel, STEAM JACKETED., 4in Center Bottom Discharge with Lid, Motor and Gearbox, 15HP 230/460 3PH 1760RPM, SHIPPING INFO 9ft LONG 4ft WIDE 7ft 7in TALL Aprox. 3000LBS (Loading Fee $500) FOB HIALEAH FL 33018

Walker 300 Gal. S/S Steam Jacketed Processing Tank, Model PZ-CB-K, Year: 2008 with 316L Stainless Steel, 150 PSI Steam Jacketed Scrape Surface and Twin Mixer, (Note: Missing Motors) (Loading Fee $350) FOB HIALEAH FL 33016

APV CREPACO 300 Gal MIX TANK- Jacketed – Max 75 PSI — 350º F Max Temp., 14″ impeller — 2 3/8 ” in shaft – with fixed bottom bushing., 18″ Manhole — Center bottom output – 2″ tri-clamp Multiple top 2″ and 3″ tri-clamp inputs, 2 Clean in place “CIP” accessories, Dimensions: Vessel Aprox. 69″ Outer Diameter – 58″ Vessel Height (Conical Top and Bottom), Total Height with Legs Aprox. 98″ — Access Ladder (NOTE: Missing Motor and Gearbox) (Loading Fee $350) (FOB Hialeah, FL)

Patterson Kelley 2 Cubic ft. S/S V-Blender, Serial 111279 with Lids and Bottom Cover, Motor 1.5Hp 1735 RPM 3PH 220/440V, Shipping Dims 7 ft Long x 65″ Tall x 52″ Deep 750Lbs (Loading Fee $350) FOB Hialeah FL 33016

SM-Hyponic Aprox. 7 ft. L Indexing Conveyor, Model RNYMS08-1320YB-20 with Aprox. 6-1/2″ W Intralock Belt, Allen Bradley PowerFlex and Allen Bradley 1606-XLS Controls, 3/4 hp Motor, 230 Volt (Crating Fee $250) (Located Hialeah, FL)

Urschel HS-A Slicer, S/N 639 (Load Fee $300) (Located Hialeah, FL)

AMS Fully Automatic Filler, Model A-400E, S/N A-400171-E with Bottom Discharge Opening Measurement of 3″ Dia., Conveyor Belt Aprox. 6 ft. L x 8 ft. W, Last used in one of FL is largest nutraeutical processing companies (Loading Fee $350) (Located Hialeah, FL)

Miami, Florida

Sidel SBO1 Reheat Stretch Blow Molding Machine, 1 – Cavity, Used with Hopper Pre-Form Hopper/Elevator, Infeed Pre-Form Orientated and Infeed Rail and Neck Personalization for 28 mm and 38 mm Preforms. Machine is in very good condiiton and currently in production (Located 75 NE 179th St., Miami, FL 33162)

2-Color Tampo Screen Pad Printing Machine, Semi-Automatic for Promotion Items (Located 74 NW 176th St., Miami, FL 33169)

One Color Ink Cup Pad Printing Machine (Easy Print) – Model Number: P1-250T (Located 74 NW 176th St., Miami, FL 33169)

Orlando, Florida

Lawrence Equipment Microcombo, Model 0P01004-02, S/N P0106, 230 V, 1 / 1/3 hp (Located Orlando, FL)

Rochelle, Illinois

GEA/Niro/Soavi 6,040 Gal. Per Hr. Homogenizer, Model NS5132H, Rated at 3000 psi, Mfg. 2010, 250 hp Main Drive (Located Rochell, IL)

Rock City, Illinois

Alfa Laval Clara 200 Separator, Model VNPX 810 SGV-34 CGL, S/N 4242634, Max. Speed 7500 r/m Year 2015, Last Used in Food Production (Loading Fee $350) (Located Rock City, IL)

LaPorte, Indiana

3M-Matic Case Sealer, Model 800r3, S/N 50044 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

3M-Matic Case Sealer, Model 800r3, S/N 50046 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

3M-Matic Case Sealer, Model 800r3, S/N 50045 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

3M-Matic Case Sealer, Model 800r3, S/N 50043 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

3M-Matic Case Sealer, Model 800r3, S/N 2049 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

3M-Matic Case Sealer, Model 800r3, S/N 50020 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

3M-Matic Case Sealer, Model 800r3, S/N 2078 with 3M AccuGlide 3 Taping Head Random Case Sealer Designed to Automatically Adjust to Variety of Box Sizes and Protect Cases. Rugged 16-Gauge Welded Steel Frame and Epoxy Paint Finish with Traction-Grip Belts for Positive Box Conveying. This Carton Sealer uses 2 – 3″ (48-72 mm) Tape to Seal Up to 15-Boxes per minute, Case Lengths of 8″ (203 mm) or more, widths of 5-20″ (127-508 mm) and Heights of 5-21.5″ (127 – 546 mm) with Twin Ger Motor Drives Allowing for High Volume and Heavy Duty Sealing Applications, Managing Cases Weighting up to 95 lbs. (38 kg) (Located LaPorte, IN)

Grundy Center, Iowa

Stainless Steel Simulator with 25HP Motor, Motor Controller and VFD (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $275.00***EUSA***

Semi-Automatic Pail Filling Line consisting of energy efficient intelligen roller converyor (no pail no movement); three head air operated fill heads for three different products, scale programmed for 35-lb net, Injet Coader, Lid Closer, 25 feed infeed and 30 feed outfeed conveyors. (LOCATED IN IOWA, RIGGING INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $475.00***EUSA***

Gardner Driver Air Compressor, 75HP Motor Model #24CA3013 (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $475.00***EUSA***

Viking Pump Model KK124A 2″ Inlet and Outlet with On/Off Switch on cart on casters (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $55.00***EUSA***

Viking Pump Model LL4125, 3″ Inlet and Outlet with Relief Valve (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $25.00***EUSA***

Viking Pump Model KK124A, 2HP drive and 2″ Inlet and Outlet, Stainless steel wet parts and SEW-Eurodrive (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $55.00***EUSA***

3000 Gallon Stainless Steel Horizontal Tank – Insulated and with mixer (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE)

500 Gallon (approx.) Stainless Steel Single Wall Tank- 38 diameter, 70″ straight side, dome shape top and bottom. Mixer propeller inside with no drive (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $275.00***EUSA***

800 Gallon (approx.) Stainless Steel Single Wall Tank- 5 ft diameter, 6 ft straight side (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $275.00***EUSA***

Lee Industries 100 Liter Stainless Steel Jacketed kettle (LOCATED IN IOWA, Free RIGGING and Loading INCLUDED WITH SALE PRICE) — Optional Palletizing Fee $75.00***EUSA***

Gardner, Kansas

Rollstock Inc. Model 2000 Machine, 320 x 320, 1 Die Set, No Pump, Newer Chains (Load Fee $500) (Located Gardner, KS)

Busch 630 Pump with Stand and Starter Box – Good Pump! Read to Run! (Load Fee $250) (Located Gardner KS)

Busch Pump, 100 – 131 – Rebuilt By Busch Still in Box (Load Fee $250) (Located Gardner, KS)

Harrodsburg, Kentucky

Westfalia SB14-06-076, S/N 1678 542, Bowl RPM 7560, Built 1982 — Worked Well When Last Ran, NOTE: Tools Not Included (Loading Fee $250) (Located Harrodsburg, KY)

Westfalia Separator / Decanter, Model CA220-010, S/N 1674 682, RPM of Bowl 5700 ($250 Load Fee) (Located Harrodsburg, KY)

Aprox. 45,000 lb Capacity Double O Cheese Vat, Aprox. 12’ tall, 10’ wide, 16’ long. Nice Condition. Was in Operation 2 years ago. ($650 Load Fee) (Located Harrodsburg, KY)

Aprox. 45,000 lb Capacity Double O Cheese Vat, Aprox. 12’ tall, 10’ wide, 16’ long. Nice Condition. Was in Operation 2 years ago. ($650 Load Fee) (Located Harrodsburg, KY)

Gaulin MC45 Homogenizer, Type 280 MC45-25-TPS, S/N 6684026 with Spare Parts including Manual, Crank Bearings, Seals and Other Parts ($500 Load Fee) (Located Harrodsburg, KY)

Cannon All Stainless DeStacker, Serial 770 with Cannon 5 hp Stainless Drive, 20-230/460 V (Load fee $250) (Located Harrodsburg, KY)

Ampco 220 Pump, Model RBZP3-220-SMTCF-N, S/N 1714369-5-1-R1-2, Refurbished by Manufacturer, ($50 rig fee) (Located Harrodsburg, KY)

Waukesha Cherry Burrell Positive Displacement Pump, Model 060, S/N 218632-98 with Sterling 3 hp Motor, Model EH0602A003070, Input RPM 1800, Ratio 25.1, Like New Condition ($150 load fee) (Located Harrodsburg, KY)

Hollis Center, Maine

2007 Pressco Technology Inc. INT Orienter, Model M28-045-G008, S/N 04031156-4, 50/60 Hz., Dimensions L 1626 W/Dia.2007 H 2019 mm — This is a Preform Inspection Unit/Orienter. It is Designed To Handle Heavier Preforms up to 9.8 grams, Utilzied for a 12 oz. or a 0.5L Bottle (Located Hollis Center, ME)

Beltsville, Maryland

Multivac H050 Brand new, never in service Multivac H050 module. Condition is New. — The H 050 handling module automates pack separation for multi-track packaging systems cost-effectively and hygienically. The accurate positioning allows denser loading of conveyor belts, and downstream processes achieve maximum output. — Optimized for end-of-line packaging activities High speed and precise Compact, with a space-saving design Easy to clean and maintain Quick changeover User-friendly controls, operated from the terminal of the packaging machine Can be customized to individual requirements — Can be used to load roll stock machines. Also, can be used downstream in seal scanning applications. (Located Beltsville, MD)

Multivac H050 module. Condition is slightly used. Includes conveyor. — The H 050 handling module automates pack separation for multi-track packaging systems cost-effectively and hygienically. The accurate positioning allows denser loading of conveyor belts, and downstream processes achieve maximum output. — Optimized for end-of-line packaging activities High speed and precise Compact, with a space-saving design Easy to clean and maintain Quick changeover User-friendly controls, operated from the terminal of the packaging machine Can be customized to individual requirements — Can be used to load roll stock machines. Also, can be used downstream in seal scanning applications. (Located Beltsville, MD)

Middleton, Massachusetts

(2) SPX / Lightnin Mixers with 3/4 hp, 230/460 V Motors, 6″ Tri-Clamp Connection and 90″Long Shaft (Loading/Palletizing Fee $250) (Located Middleton, MA 01949)

Factory New SPX/Lightnin Mixer, Model MS52S with 3/4 hp, 230/460 V Motor, 6″ Tri-Clamp Connection and 90″ Long Shaft (Loading/Crate Fee $275) (Located Middleton, MA 01949)

Lightnin Mixer, Model V6S220 N, S/N R9711381005 with 2 hp Inverter Motor, 230 / 460 V and 50″ Long Agitator Shaft, (Loading / Palletizing / Shrink Wrap $250) (Located Middleton, MA 01949)

Arden Hills, Minnesota

Van Vetter Aprox. 300 Gal. S/S Jacketed Agitated Milk Tank (Located Arden Hills, MN)

Bladenboro, North Carolina

Multi-Vac Thermoformer/Horizontal Vacuum Packaging Machine, Model R230, S/N 846,415/3+N/50 with Tooling, Mfg. 2000 (Rigging Fee $300.00) (Located Bladenboro, NC 28320)

Avenel, New Jersey

Colton Hope. Inline 8 head piston filler, Model number A-19-08-68-60, last used in food plant. (Located Avenel, NJ)

Hammonton, New Jersey

Surplus Vector Hi Coater Model HCF-130 Table Coater, S/N 43343-HC244, S/S, 52″ Diameter Drum with (4) Rows of Perforations and (4) Baffle Plates, Automatic Trap Door for Emptying and Cleaning the Pan. The Pan is included. Drum Rotates 4-16 RPM. Manifold Spray Bar, Batch Inpur Capacity 120-140 kgs. Batch Coated Product Output 140-160 kgs. 3 hp Motor, 3 Phase, 60 Cycle, 460 Volt with Allen Bradleey Digital Contrls, Model Computab HCD 110 Volt, 1 Phase, 60 Cycle. (Located Hammonton, NJ) (Loading Fee $1,500 — Shipping Hours M-Th 9 am – 3 pm or by appointment)

Newark, New Jersey

New in 2012 Lab All S/S High Shear Mixer (Located in NEWARK, NJ)

TOLAN 400 GALLON S/S PRESSURE VESSEL, S/N 8219 (LOCATED IN NEWARK, NJ)

Stainless Fluid Bed Processor Dryer (Located in NEWARK, NJ)

Kanara 23-Station Tablet Press, D Tooling (Located in NEWARK, NJ)

New Brunswick, New Jersey

Complete Agilent Technologies 6110 Quadrupole LC/MS, set up with printer, computer, monitor, Edwards vacuum pump, program & manuals, PLUS Agilent Technologies Quaternary 1200 Series (6 components) + one(1) bin of cables, regulators & tubing + one (1) bin of spare parts – was operational, currently out of service (elevator handling fee $50.00) (location New Brunswick NJ USA A209)

Tuttnauer AutoClave with printer EZ-9, model #2340EA, 120V, cleaned + reconditioned with new filter (elevator handling fee $30.00) (location New Brunswick NJ USA A209)

Imball Model CI-9 Top Carton / Case Gluer Nordson hose and gun still mounted on the machine.A Carton or Case with the bottom sealed is placed in the machine lugs and the machine hold it in place and moves it to the next loading area. After case is loaded all top flaps are closed and glued shut automatically. Last doing a seasonal Italian cake product in a chipboard box with tapered sides and an automatic bottom. 4″-10” max. box width (Up to 18″ wide with some work) side case Pushers are on 12″ centers now. 24″ centers if every other one is removed so max. box length is 20-23″. Height is adjustable from approx. 4-10″. Box travels on a belt conveyor. The conveyor height and side lugs move in and out with hand cranks. The machine was manufactured in Italy, we have the original manual. 480 vac. and compressed air (handling fee $250 with forklift help to load most trucks) (Located New Brunswick, NJ)

Harro Hofliger (Hoefliger) model BK 40 Intermittent motion auto load horizontal glue cartoner. 5″ high carton pushers on 9″ centers with adjustable leading lug. 8″ wide product in-feed conveyor stacks product, blisters, pouches etc. into adjustable collection hopper which drops product into adjustable product bucket. 24 buckets are 12″ long and 5″ high, currently set to 5″ wide. A single pusher loads the product, which could be a single bottle or tube, into the opened carton. The adjustable carton feed hopper is currently set for a 10″ x 7.5″ flat carton, with a maximum adjustment to approx. 16″ x 11.5″ flat. 2 suction cup arms, with room for up to 6 suction cups, pull the cartons, past a carton break device and into the carton flights. Flight chains are adjustable from approx. 4″-11″ across the machine. Machine has clear interlocking doors that slide, pull open or a large gull wing door opens over the carton gluing section for full access. This machine features a swing around over head control panel, a remote jog control for set up and change over and 2 E-Stop buttons. 2 Nordson 2 module guns and hoses are mounted to the machine which comes complete with a tested Nordson 3400-3500 series glue tank. This Unit Weighs about 3200 Lbs. Overall Dimensions: 183″ x 53″ x 80″ (with Controls Arm) (handling fee $350 with some forklift assistance to load most trucks) (Located New Brunswick, NJ)

Doboy Scotty flow wrapper in running condition former foods use. SS carrier chain with pushers every 6″.Overall Dimensions Aprox. 9′ x 3′ x 5′ (Located New Brunswick, NJ) Elevator fee $50.

Assorted Lab Equipment including: Autoclave, Gas Chromatographs, Lab Oven, Assorted Glassware, Cabinets!

Assorted Office Furniture including: Desks, Chairs, Bookshelves, File Cabinets, Artwork, Lunch Room, Server, Etc.!

Perth Amboy, New Jersey

Frick 100 hp Rotary Screw Compressor, Model RXF30, S/N XJF120M0066EE with 3600 RPM, 362 PSIG, 2500 Pressure, NH3/R22 Refrigerant (Located Perth Amboy, NJ)

Frick 100 hp Rotary Screw Compressor, Model RXF30, S/N 60066NFMNLHAA2 (Located Perth Amboy, NJ)

Frick 100 hp Rotary Screw Compressor, Model RXF30, S/N XJF120M0169EE with R717 Refrigerant (Located Perth Amboy, NJ)

Frick 100 hp Rotary Screw Compressor, Model RXF30, S/N JF120M0__L8EE (Located Perth Amboy, NJ)

Frick 100 hp Rotary Screw Compressor, Model RXF 30 H, S/N 10241B02878954, Sales Order #30031864410 with 300 psig, R22 Refrigerant, Mfg. 2009, (Located Perth Amboy, NJ)

Carson City, Nevada

Hielscher U1P4000 Liquid Ultrasonic Processing System with (5) Hielscher UIP4000 Ultrasonic Units – Each with Generator and Sonotrode, 4kw Processing Capacity, Process Flow Rates, Biodiesel Transesterification: 1 – 3m³/hr; Emulsification (e.g. oil/water): 0.4 – 2m³/hr; Cell Extraction (e.g. algae): 0.1 – 0.8m³/hr; Dispersing / Deagglomeration: 0.02 – 0.4m³/hr; Wet Milling and Grinding: 0.01 – 0.02m³/hr — Equipped with: Microprocessor Control w/ LCD Display; Double Wall Stainless Steel Mounting Cabinets w/ Sound Insulation; Self-Contained Design – Control cabinet with Main switchboard and (5) Ultrasonic Power Supply Units; Disintegration system consisting of 5 Interconnected S/S Cabainets, Each with an Ultrasonic Transducer UIP 4000 and Flow Cell; 3x Air-Water Heat Exchanger (1x in the control cabinet, 2x in the disintegration system); Height 220 cm, Width Control Cabinet 180xm, disintegration cabinets 400 cm, Depth 60 cm. Total weight about 900 kg. Typlical applications of the UIP4000hdT include homogenization, emulsification, dispersing & particle fine milling, extraction, malaxation of olive oil, dissolving or sonochemical reactions such as sono-synthesis and sono-catalysis (Located Carson City, NV)

Sepeex All Things Flow Progressive Cavity Pump, Type MDC-05-6LT, Commission #873416, 1001-300 mPas Viscosity, CBD Oil, 32 Degree F – 113 Degree F Product Temperature, 5 – 9 pH Value, 2 to 30 USGPH Capacity, 60 psi Pressure, 21 – 311 RPM, Drive Motor, 3400 RPM, 60 hz (Located Carson City, NV)

Marchisio 1,000 L S/S Tank with Dual 4.5 and 7.5 inch Propeller Style Agitator and Baldor 1 hp Motor, 1725 RPM, 115/230 V and Stand (Located Carson City, NV)

Marchisio 1,000 L S/S Tank (NOTE: Does Not Include Motor or Stand (Located Carson City, NV)

Aprox.50 Gal. Kettle with Motor – NOTE: To their knowledge the motor and heating element still work, they just need to be rewired (Located Carson City, NV)

Central New York

Ackley Tablet Printer with Feeder. Both units are on wheels, Printer Serial Number is: 1181. As shown in photos. (Located Central New York)

ProQuip tablet sizer. This is a 4 lane unit in operating condition. As shown in photos. Video available upon request. (Located Central New York)

Tablet Sizer – Custom Made, 10-Lane unit. As shown in photos. Video available upon request. (Located Central New York)

Glatt GPCG3 Fluid Bed Dryer. Model: GPCG-3, Serial: 4962, 220 Volt, 3 Phase, 60 Hz. Machine comes with two chambers. As shown in photos. Video available upon request. (Located Central New York)

LSI Pressure Sensitive Wraparound Labeler. Model 1500. 120V, 60Hz, 1Ph, 15A. As shown in photos (Located Central New York)

Ohio Area

Omegasonics Parts Washer. Model: OMG4430, Serial: APOMG4430-255, Age: Purchased in 2015, Power Requirements: 240/50, As shown in photos. (Located Ohio)

COE Coil Stock Power Straightener. Model: CPPS-250-18 Series: 69666-2, 18” Coil Width, .210” thickness max, 7 rolls, with sonic loop feed control, Age: New, made in 2016 but never used Power Requirements: Supply: 480V 15 Amp 3 Phase, As shown in photos (Located Ohio)

COE Coil Stock Reel. Model: CPR-PO-2518, Series: 69666-3, Age: New, made in 2016 but never used, Power Requirements: Air powered drag brake and hold down arm. As shown in photos. (Located Ohio)

Dayton, Ohio

AutoProd 2 x 4 Lane Inline 51 mm Portion Pack Filler, S/N 1443. Was just serviced by R.A. Jones Back in December 2020. Updated PLCs, including a newer Allen Bradley Touch Screen, Heater Controls and Wireless Access Built to Monitor the Machine Output. Capable of filling 1.5 fl oz. and 55 mm cup. Quoted speeds from R. A. Jones was 280 – 320 CPM. It has a Luminite Probe with Connection Ready to be Placed in Line. Was Running Cream Cheese Cups for Food Service (Located Dayton, OH) (Loading/Rigging $500.00 – Already Palletized and Ready for Shipment)

Carlton Helical Ionized Air Rinser, 2017 M #173-4BXLSS-4000 with (5) Invertors, (1) for 32 oz. Standard Mayo that Brand New, (1) 12 oz. Ring Neck Bottle, (1) 592 ml Square Bottle, (1) 10 oz. Sauce Bottle, (1) 24 oz. Square Bottle Pasta Sauce Bottle (Located Dayton, OH)

Accuply Front and Back Labeler, Currently Set- Up for only one side but can be converted back to both, top hold down arm, adjustable from 2″ Tall Bottles to 11.5″ Bottes, 110 V (Located Dayton, OH)

Chattanooga, Tennessee

Lee Industries 250 Gal. S/S Steam Jacketed Kettle, Year 2012 with 90 psi, Scrape Surface and Twin Mixer, Last Used in Food Production (Loading Fee $400) (Located Chattanooga, TN)

Halls, Tennessee

Alfa Laval BRPX213 Clarifier Centrifuge (Located in Halls, Tennessee)

Hartsville, Tennessee

Evapco Inc. 6-Coil Evaporator, Model TFC12-388143-500L36, S/N 971583, 250 psigwith (3) Defrosting Pans (Rigging Fee $3,000) (Located Hartsville, TN)

Federal 40-Valve LIGHTWEIGHT LEFT HAND FILLER, Model ESWSS 40.20, S/N 2252ESWSS 5/40.20 GL844, J-Series, Spring Style Valves with Removable Sleeves, CIP Rings, PST Level Controller, Tall Bowl Design, Screw Infeed, 3-Pin Bottle Handling Equipment for 14 oz. Containers, 20-Head Capping Turret with Gear Driven Cappers for Screw Caps, Contains Velocity Cap Hopper, Orienter and Cap Chute, Cable Emergency Shut Off, Aprox. 124”W X 93”L X 108” O.A.H. (Rigging Fee $30,000) (Located Hartsville, TN)

Nu-Con S/S Powder Hopper, S/N N05045530 (SST-105-12C) with 43″ Dia, (2) Clmp on Removable Covers, Aprox. 43″ Deep Cone with 7.5″ Outlet, No Legs (Hopper 2) (Rigging Fee $100) (Located Hartsville, TN)

Nu-Con S/S Powder Hopper, S/N N05045520 (SST-105-11C) with Top with 15.5″ Dia. Opening Cone-Bottom with Side Bolt on Hinged Manway, 15″ x 10-3/4″ Rectangular Flanged Outlet, 48″ Dia. x 19″ Straight Side, 51″ Deep Cone, No Legs (Hopper 1) (Rigging Fee $150) (Located Hartsville, TN)

Continental Aprox. 18 ft. All S/S Single Lane Case Washer, Model D30R for Standard 13″ x 13″ Cases, (3) Access Lids, (3) Removal Debris Screens, (2) Wash Stages, (1) Rinse Stage, 18″ Pass Height, Rated 40 Cases Per Minute, Aprox. 50″ x 216″ x 54″ (W-312-03C (Rigging Fee $450) (Located Hartsville, TN)

CEIA/THS Industrial Metal Detector, S/N 20102245015 with 13″ W x 6″ H Aperture, 11.75″ W Conveyor Belt, 1 hp Drive, 208-230/460 V, Aprox. 50″ L x 32″ W x 54.5″ H (MH-232-C4 (Rigging Fee $250) (Located Hartsville, TN)

THS Industrial Metal Detector, Model T/21E-350200-0011, S/N 21300249060 with 10″ W x 7″ H Aperture, 11.75″ W Conveyor Belt with Reject Arm, .70 hp Drive, 230 VAC, Aprox. 62″ L x 51″ W x 59″ H (Manufactured in 2013) (H-232-C1) (Rigging Fee $250) (Located Hartsville, TN)

Apollo, Pennsylvania

Frick 125 hp Screw Ammonia Air Compressor, Model RXB 50, S/N S0093KFMNLHAA2, RPM 3450, Volt 460, Phase 3, Max Speed 3600 RPM, 300 PSIG, R22 Refrigerant (Loading/Handling Fee $500) (Located Apollo, PA)

Aprox. 3,000 Gal. Pressure Vessel Cone Tank, (Loading/Handling Fee $500) (Located Apollo, PA)

Beseler T-20-9 Heat Tunnel, S/N 11910976, 220 V, 60 Hz, 3 Phase, 40 Amps (Loading/Handling Fee $300) (Located Apollo, PA)

Crepaco Aprox. 200 Gal. S/S Jacketed Process Tank, S/N 6664 (Loading/Handling Fee $500) (Located Apollo, PA)

Production Line Case Packer, Model 120-1071241, S/N 120-1436 – Utilized for Cannon Equipment NEP Carton Filler (Qts. And 1/2 Pints) with Allen Bradley SLC 5/01 CPU Controls includes Some Spare Parts (Loading/Handling Fee $150) (Located Apollo, PA)

Ingersoll Rand 50 hp Rotary Reciprocating Air Compressor, Model SSR-EP50, S/N F6429U92301, CFM Capacity 198, 460 V, 3 Phase, 135 psig (Loading/Handling Fee $300) (Located Apollo, PA)

Aprox. 1,500 Gal. S/S Cone-Bottom Single Shell Tank (Loading/Handling Fee $500) (Located Apollo, PA)

SPX Heated Purged HPD750 Desiccant Compressed Air Dryer with Orange Skid Included (Loading/Handling Fee $250) (Located Apollo, PA)

Amarillo, Texas

Mueller 60 BBL Stainless Steel Cone Bottom dimple jacketed fermenter with discharge port with butterfly valve, 7′ straight side, 6′ diam., 4′ cone bottom, dome top, 11″ from bottom of discharge to floor, center bottom discharge, front manhole (Located Amarillo, TX)

Lee Industries SS Jacketed Kettle, Rated 200 Gallon Capacity, Includes Mixer (LOCATED IN AMARILLO, TX) (Loading and Handling Fee: $300)

Lee Industries SS Jacketed Kettle, Rated 200 Gallon Capacity, Includes Mixer (LOCATED IN AMARILLO, TX) (Loading and Handling Fee: $300)

Bryan Boiler System, Model F850-S-150-G, National Board #41474, Bryan #9803, 120 Vac, 1998 Year Built, 150 psi Steam Boiler, 20 hp (Located Amarillo, TX)

Screw Conveyor, S/S with Plastic Screw, Aprox. 6″ Dia. x 36″ Length x 48″ Wide with 10″ Deep Hopper, Aprox. 20 ft. High Discharge on Wheels (Locted Amarillo, TX)

Conroe, Texas

Damrow 100 Gal. S/S Tank, M/N 100-GA, S/N 951121, Type V-H, with S/S Hinge Lids, with Top Mounted Agitation Motor (Handling, Loading, Site Management Fee: $100.00 USD) (LOCATED IN CONROE, TX)

3-Piston Homogenizer, Mounted on Mild Steel Frame (Handling, Loading, Site Management Fee: $250.00 USD) (LOCATED IN CONROE, TX)

Cherry-Burrell Instant Freezer, M/N V1F, S/N 5105, with S/S Tube ; Mild Steel Frame (Handling, Loading, Site Management Fee: $150.00 USD) (LOCATED IN CONROE, TX)

Cherry-Burrell Instant Freezer, M/N V1D, S/N 3013, Mounted on Mild Steel Frame (Handling, Loading, Site Management Fee: $150.00 USD) (LOCATED IN CONROE, TX)

The Creamery Package MFG. Company Whipper, S/N 540, Mounted on Mild Steel Frame (Handling, Loading, & Site Management Fee: $100.00 USD) (LOCATED IN CONROE, TX)

Fort Worth, Texas

Groen stainless steel jacket tank, size: 30″ wide x 24″ deep, stainless steel rolling frame (Located Fort Worth, TX)

Ishida CCW-S-212 computer Weighing Scales, serial 11022, volt 208, 14 heads. Woodman Polaris PLBA125LN06266-92 bagging system, volt 230, 1-phase, safeline Metal detector, Mesinie 112″ wide x 112″ long x 84″ height, with stairs (Located Fort Worth, TX)

Weight Pack AEFI Weighing system, serial # 577, volt 115, 40 PSI (Located Fort Worth, TX)

Patterson-Kelly twin shell dry V blender, serial # LB-8854, volt 110 (Located Fort Worth, TX)

ADMV 38460 pick and place system, serial # 17658-11, YR 2012, 2 1/2″ conveyor (Located Fort Worth, TX)

Cascade 35D-CCB-185 forklift carton clamp, serial # PTL1249017-5, max capacity 3500 lbs. (Located Fort Worth, TX)

Filamatic DAB-8 Bottle Filler, S/N 021555, Volt 110, 2-Head with Extra Parts (Located Fort Worth, TX)

Kadish 1100 Fillit Bottle Filler, S/N 1196, Volt 110 (Located Fort Worth, TX)

Kinsley KSE-400 Bottle Turner, S/N JO277/WO-2576, Volt 120 (Located Fort Worth, TX)

Laughlin 1800/3000 AcculturationTable, S/N 3500 274, Volt 110, Overall Size: 60 wide x 90 long x 38 high, with two 6 wide x 24 long arms (Located Fort Worth TX)

Belco STC 2520 Combo L-Bar Sealer and Shrink Tunnel, S/N 5268, Volt 240, 1-Phase (Located Fort Worth, TX)

Preferred Packaging PP180844 Shrink Tunnel, S/N B130204, Volt 220, 1Phase, Mounted on Casters (Located Fort Worth, TX)

APV Anderson 454 S/S Dual Chamber Blower Shrink Tunnel, S/N 35299, Volt 230, 3-Phase, New Curtains and Rubber on Conveyor Rollers (Located Fort Worth, TX)

EL Mark Print and Apply Labeling Machine, UPA110-729LPB, Zebra 110PAX4 Printer (Located Fort Worth, TX)

Universal Labeling System, S/N SL1000AS-1843R (Located Fort Worth, TX)

EL Mark UPA-ll Print Applicator, S/N UPA-ll-1103RT06-05-C-1181, Volt 110, Zebra ZE500 Printer (Located Fort Worth, TX)

Qualdrel Q10R 4.5 Labeling System, S/N 51209-003, Volt 120, YR 2004 (Located Fort Worth, TX)

Weber 5200 Printer Applicator, S/N W5200V21266. Volt 115, Zebra 170PAX3 Printer (Located Fort Worth, TX)

Weber 5200 Printer Applicator, S/N W5200V20755, Volt 115, Zebra 170PAX3 Printer (Located Fort Worth, TX)

Hortonville, Wisconsin

Fords Holmatic 8-Station S/S Sanitary Rotary Cup Dispenser Filler, Sealer and Coder — This system was last used in the dairy industry doing yogurt and remains in excellent working condition. Was purchased by RA Jones and replacement parts can be ordered through them, Side panels were removed for pictures and will be attached prior to shipping, We can only put in 12 photos here so we have numerous additional photos should you want to see something in particular. We have video of the system under power upon request. This system is plug and play with no issues and is ready for immediate shipment. (Crating Fee and Loading Fee $850) (Located Hortonville, WI)

Urschel S/S Sanitary Dicer, Model RA-D, S/N 1643 – Portable on Casters. This unit was last used in the dairy industry. This unit will be set-up with the cutting parts shown in nthe photos. There is 1/4″ Cross-Cut with 3/16″ Circular, Unit has a 5 hp Drive Motor with All the Disconnects. This System will require a couple of guards and an Infeed Hopper, Otherwise the System is Complete. (Crating – Loading Fee $500) (Located Hortonville, WI)

PMR (Packaging Machinery Resources) Dual Lane Continuous Container Filler, Sealer, Lidder, Model 1300, S/N 20070207, with All S/N Sanitary System, 440 Volt, Allen Bradley Micrologic Controller, Allen Bradley PowerFlex Speed Controller, Allen Bradley Panelview 300 Control Pad, Unit is on Casters, System is rated at Aprox. 30 Containers Per Minute, Current Container Diameter is Aprox. 6″, — This System Denests the Containers, Fills the Containers, Puts a Protective Seal on the Container and then Lids. (NOTE: This System will need to Ship Via Flatbed so please inquire for shipping costs) (Located Hortonville, WI)

200 CU FT Stainless Steel Liquids/Powder Paddle/Ribbon Blender, (111 cu ft capacity to top of agitator arm, Trough measures: 48″W x 96″L x 80″ deep overall, Agitator is 46″ dia with 3-1/2″ wide blades x 3/8″ thick, Single shaft, No mfg tag, 3 inch end bottom drain; 21-1/2 clear to ground, 2 hp SEW Eurodrive, 1720 rpm, Gearbox tag info: 1720 7.4 232.29 109.2, Unit has counterbalanced lid, Lid has (3) 3 inch inlets and (1) 2 inch inlet, OADS: 77″W x 120″L x 108″H (add 30″ to height if lid installed), Unit last used in the food industry, Used in excellent working condition, Blender will need to ship via flatbed (Loading Fee $1,000) (Located Hortonville, WI)

Belam RMF 2500 lb.Capacity S/S Sanitary Vacuum Mixer Massager, Model VMM 2500, S/N 11907 with Trough is 45″W x 78″L x 32″ deep, Dual shaft massaging paddles, Twin hydraulic motors, Vacuum pump, Complete with stainless steel cover, OAD’S: 72″W X 120″L X 84″H –Last used in the meat industry on hams, Unit is in very good condition (This system will need to ship via flatbed — we can help arrange shipping (Loading fee $750) (Located Hortonville, WI)

Safeline Mettler Toledo 3 x 40 S/S Sanitary Metal Detector, System was last used in a Tyson plant on breaded fish fillets coming out of a spiral freezer. Unit was just removed from service in Oct 2021. Unit is in excellent working condition. Apparature opening is 3 inches high X 40 inches wide, Product clearance is a little over 2 inches high, Belt is hydraulic driven, Automatic belt pull back reject to hopper below the system, All stainless steel sanitary construction, Overall dimensions are 106 inches high X 66 inches long X 62 inches wide, System could be lowered by 48 inches if the bottom frame with hopper was removed. (Crating and Loading Fee $750) (Located Hortonville, WI)

World Cup 8-Pocket Intermittent Motion S/S Rotary Cup Filler Sealer, Model 8-12 with pre-cut heat sealer. Rated from 8 to 45 cups per minute – depending on materials. Fill range: 1 oz to 10 oz. Container size up to: 3.18″ in Diameter. Change parts required to accommodate other size ranges. Cup magazine with dual screw cup denester, piston filler, pre-cut foil lid magazine, Pneumatic heat sealing head and sweep arm reject. Control panel with fill, foil, heat, table and jog on / off switches. Temperature controller and e-stop. Mounted on (4) leg stainless steel base with casters. Hopper will be supplied prior to shipping. (Crating and Loading Fee $500) (Located Hortonville, WI)

Quadro S/S Sanitary Mill, Model 197GPS, Serial # 197GPS 197-0926 2000 — This system was just recently removed from a dairy mfg plant and remains in excellent working condition. with 1 HP Lesson Washdown Drive, Fincor Model 2330 Adjustable Speed Controller, SCALE UP FACTOR 1, WET 375Q (9.5MM) kg/hr 220, DRY 094R (2.4MM) kg/hr 360, DRY 040G (1.0MM) kg/hr 80, MOTOR HP (kW) 2 (1.5), Robust component design, Reduced heat generation at high capacities, Low speed design applies gentle action to the product. Low energy/heat enables milling of heat sensitive products., 360° positive product discharge using the entire screen surface. Low dust reduces risk and more environmentally friendly., Easy clean design for low maintenance requirements. No restrictions to capacity due to the plug-feeding capability. Ability to choke or flood feed. Please inquire for shipping rates – (Crating Fee and Loading Fee $400) (Located Hortonville, WI)

DCI 1,000 Gal. S/S Insulated Vertical Agitated Silo, Unit has Side Bottom Agitation, Unit Measures 53″ Dia. x 144″ H, Overall Height with Legsis 14 ft., Side Bottom Manway, Ladder with Top Sightglass, This vessel was last used in the dairy industry and remains in excellent condition, Unit will Need to Ship Via Flatbed (Loading Fee $500) (Located Hortonville, WI)

Multivac S/S Thermoformer, Model R140, S/N 103804, Unit Mfg. November 2005, 420 Web Width, 3/60/220 Voltage, System Capable of 10 Cycles per minute, Stand Alone Busch Vacuum Pump, Model RA0 165D, 7.5/5 hp, 230/460 V, Vacuum Pump was placed under the machine freestanding. Over 10K in New Spare Parts, All Manuals Included, Current Infeed and Discharge Height is 35″ which is adjustable with foot pads, Overall Dimensions of teh unit are Aprox. 155″ L x 42″ W x 78″ H –Unit was last used in the dairy industry packaging Feta Cheese, System is plug and go ready for immediate shipment, System was completely rebuilt by the previous owner in late 2019 (Loading Fee $500) (Located Hortonville, WI)

CSE S/S Sanitary Steam Injected Screw Cooker / Blancher, Model CCS.2014.W, S/N 85002, Aprox. 20″ Dia. x 14 ft. with Aprox. 20″ Dia. x 14 ft. L Auger, 10 Bottom Steam Injected Ports, 3-Hinged Covers, Insulated Sidewalls, 2.5 hp, 208-230/190 Volt Motor thru Reducer, Chain and Sprocket. This unit was last used in the food industry. This unit will need to ship via Flatbed due to the length (Loading Fee $500) (Located Hortonville, WI)

Sine Tote Unloading System, Model TPP-T-0401 with Sine MR135 Pump, S/N 106330704 (2004), Unit last used in the food industry, Tote Pump Platform Raises Up to Allow Tote Unter it, Pump Platform then decends into tote to Pump Product Out, All S/S Sanitary Design, Extra Pump Parts will be included in the sale. Specifications Max. Flow Rate 138.7 gpm, 31,500 lph, Max. Working Pressure 150 psi 10 bar, Operation Temperature Range 250 Degree F (130 Degree C) (Crating and Loading Fee $600) (Located Hortonville, W)

Pulaski, Wisconsin

Aprox. 1,000 Gal. Cheese Vat, S/N 26545 with Steam Heat, Agitator Rail, Milk Paddles, Square Ends, 3″ Outlet, Inside Dimensions Aprox. 16’5″ L x 57″ W x 26″ Deep, Overall Dimensions Aprox. 17′ L x 63″ W x 34″ H (Unit #3224) (Rigging $600.00 – Will Need Flatbed) (Located Pulaski, WI)

Cheese Bag Drainage Cart / Press, Overall Dimensions Aprox. 192″ L x 65″ W x 55-1/2″ H (Unit #C0131) (Rigging Fee $500 – Will Need a Flatbed) (Located Pulaski, WI)

Jamesway Bulk Tank Converted into an Aprox. 1,000 Gal. Ice Bank, Model FK1000, S/N 8299 with 1-1/2″ Tri-Clamp Outlet, Copper Lines, Inside Dimensions 101″ L x 70″ W x 33″ Deep, Overall Dimensions Aprox. 110″ L x 77″ W x 62″ H) (Unit #3332) (Shipping Fee $550) (Located Pulaski, WI)

APV Plate Heat Exchanger, Model SR300, S/N 22345 with (82) Plates, 2-1/2′ Inlet/Outlet, Plate Dimensions Aprox. 16″ W x 43-1/2″ H, Overall Dimensions Aprox. 113-1/2″ L x 37″ W x 82″ H (Unit #C0216) (Rigging Fee $650) (Located Pulaski, WI)

Laska K-130 Bowl Cutter, 130 liters or 30 Gal., Test Ran on 7/12/21 (Main Motor Non-Working) Control Box Connected to Hose, Agitator with Mixing Blades and Plastic Round Piece, Cover (Half is Plastic), Speed Control for Mixer, Does Not Have Enough Power to Run the Blades inside the Bowl, Overall Dimensions Aprox.80″ L x 60″ W x 62-1/2″ H) (Unit #C2018) (Shipping Fee $400) (Located Pulaski, WI)

Ambaflex 45 ft. Spiral Conveyor with Adjustable Legs, SEW Motor, 3 Phase, Gearbox 11:77 Ratio, Between the 2 Tracks 31″ and 16″ W Belt Dimensions, Overall Dimensions Apro. 71″ W x 188″ H (Unit #C0055) (Rigging Fee $500) (Located Pulaski, WI)

Baldor 700 hp Motor, 460 V, 3585 RPM, 3 Phase, Frame 5009S, Overall Dimensions 52″ L x 41″ W x 28″ H (Unit #3292) (Rigging Fee $350) (Located Pulaski, WI)

Baldor 700 hp Motor, 460 Volts, 3585 RPM, 3 Phase, Frame 5009S, Overall Dimensions Aprox. 52″L x 41″W x 28″ H (Unit #3293) (Shipping Fee $350) (Located Pulaski, WI)

FineSaver with 28″ L Auger, Tank Aprox. 14″ Dia. x 25″ Deep, 4″ Inlet / 2-1/2″ Outlet on Tank, Finesaver 4″ Inlet / 3″ Outlet, Overall Dimensions Aprox. 47″ L x 25-1/2″ W x 46″ H, Tested on 9/25/21 (Unit #3324) (Rigging Fee $ 150) (Located Pulaski, WI)

New Bothwell, Manitoba, Canada

Multivac Vacuum Packaging Machine, Model R230, S/N 810, 220 V/60 Hz (1999) (Unit #96) (Located New Bothwell, Manitoba Canada)

2016 Adept Pick and Place 4-Axis Parallel Robot, Model Hornet 565, S/N 751-00142 includes Arms, Clamp Style End of Arm Tooling, 200 – 240 VAC (Unit #101) (Located New Bothwell, Manitoba Canada)

2008 Viking Masek Packaging Bagger, Model E250, S/N 81376-2397, 208 VAC, 60 Hz (Unit #44) (Located New Bothwell, Manitoba Canada)

Ontario, Canada

Filamatic 4-Head Liquid Filler, Model DAB 5.4 (Located Ontario, Canada K7R 4B3)

Pampac Blister Machine, Model BP102 (Loading Fee $200) (Located Ontario, Canada K7R 4B3)

Kalish Cotton Machine, Model KOTNR, S/N 7857, 2 x 1/2 hp, 110 V, Single Phase (Located Ontario, Canada K7R 4B3)

Industrial Feeding System, S/N 950840, 1 Amp, 110 V, 60 Cycle (Located Ontario, Canada K7R 4B3)

Graco Air Pump, Model 206445, S/N 700, Ratio 10-1, Air Model 206527 (Located Ontario, Canada K7R 4B3)