Chat with us, powered by LiveChat

Largest Fluid Milk Auction of 2016! Elmhurst Dairy of NYC: Plastics, Fluid Milk, Fleet & More!

Featured Auction

 

AUCTION  |  ONSITE AND ONLINE  |  December 13-14, 2016
LOCATION
:
155-25 Styler Road, Jamaica, NY 11433

Complete Plastics and Blow Molding Department


All Blow Molds Recently Upgraded by Uniloy with Air Barrels, Cooling, Motors, VFDs, PLC Controls and More. Currently Set-Up with DBJ 38 mm Neck Trim. 41 Grams for 1/2 Gallon Bottles. 62 Grams for Gallon Bottles. 

Uniloy 6-Head Half Gal. HDPE Blow Molder, Model 350R2, S/N 5112, Set-Up with Platen Size Aprox. 45-1/2″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 38-1/2″, Aprox. 8″ Head Spacing includes 75 hp Drive with SIemens VFD, Air Barrel Cooling, 15 hp Hydraulic Power Unit, Siemens Simatic 505 and 555 PLC Controls with Xycom Automation Touchpad Display, includes Uniloy Resin Hopper/Loader, Aprox. 67″ W x 110″ L Cooling Bed, Model 8FTCB, S/N 5112CB, Trimmer, Model 10041, S/N 5112T, (2) AIS Container Handling Auto Adjust II Leak Detectors, S/N 10416 and S/N 10414 (Blow Molder Unit #6)

Uniloy 6-Head Half Gal. HDPE Blow Molder, Model 350R2, S/N 2923, Set-Up with Platen Size Aprox. 64″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 56-1/2″, Aprox. 8″ Head Spacing includes 2011 Retrofit Kit with 100 hp Drive with Rockwell Automation VFD, Air Barrel Cooling, 30 hp Hydraulic Power Unit, Allen Bradley Compact Logix L31 PLC Controls with PanelView Plus 700 Touchpad Display, includes Conair Resin Hopper/Loader, Aprox. 59-1/2″ W x 109″ L Cooling Bed, Schematic Dwg. #C-831722, Trimmer, Model 10040, Schematic Dwg. #D-849107, Precision Leak Detector, Job #PO11354, Inv. #44355 (Blow Molder Unit #5)

Uniloy 6-Head Gal. HDPE Blow Molder, Model 350R2, S/N 2649, Set-Up with Platen Size Aprox. 65-1/2″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 58-1/2″, Aprox. 8″ Head Spacing, includes 2002 Retrofit Kit with 100 hp Drive with Siemens VFD, Air Barrel Cooling, 30 hp Hydraulic Power Unit, Allen Bradley Compact SLC 5/04 CPU PLC Controls, Uniloy Reciprocating Extrusion Series Quick Panel II Total Control Touchpad Display, includes Conair Resin Hopper/Loader, Aprox. 57″ W x 124″ L Cooling Bed, S/N CB-3781, Trimmer, Model 10039, Schematic Dwg. #D-846986, TRC Engineering Dual Integrated Leak Detector (Blow Molder Unit #4)

Uniloy 6-Head Gal. HDPE Blow Molder, Model 350R2, S/N 2706, Set-Up with Platen Size Aprox. 64″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 58-1/2″, Aprox. 8″ Head Spacing, includes 2002 Retrofit Kit with Drive, Siemens VFD, Air Barrel Cooling, 30 hp Hydraulic Power Unit, Allen Bradley Compact SLC 5/04 CPU PLC Controls, Uniloy Reciprocating Extrusion Series Quick Panel II Total Control Touchpad Display, includes Conair Resin Hopper/Loader, Aprox. 59-1/2″ W x 116″ L Cooling Bed, S/N CB-3781, Trimmer, Model 10037, Schematic Dwg. #D-844584, TRC Engineering Dual Integrated Leak Detector (Blow Molder Unit #3)

Uniloy 4-Head Gal. HDPE Blow Molder, Model 350R2, S/N 2498, Set-Up with Platen Size Aprox. 44-1/2″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 34″, Aprox. 8″ Head Spacing,  includes 2005 Retrofit Kit with 100 hp Drive with Siemens VFD, Air Barrel Cooling,15 hp Hydraulic Power Unit, Allen Bradley Compact SLC 5/03 CPU PLC Controls, Uniloy Reciprocating Extrusion Series Quick Panel II Total Control Touchpad Display, includes Conair Resin Hopper/Loader, Aprox. 34″ W x 119″ L Cooling Bed, Schematic #C-831722, Trimmer, Model 10026, Schematic Dwg. #C-835893, TRC Engineering Dual Integrated Leak Detector (NOTE: In 2015 Uniloy Retrofit Overhaul to Bottle Guides and Trimmer Rails) (Blow Molder Unit #2)

Uniloy 4-Head Gal. HDPE Blow Molder, Model 350R2, S/N 2497, Set-Up with Platen Size Aprox. 42-1/2″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 34-1/2″, Aprox. 8″ Head Spacing, includes 2003 Retrofit Kit with 100 hp Drive with Siemens VFD, Ho Screw, Air Barrel Cooling, Allen Bradley Compact SLC 5/03 CPU PLC Controls, Uniloy Reciprocating Extrusion Series Quick Panel II Total Control Touchpad Display, includes Conair Resin Hopper/Loader, Aprox. 32-1/2″ W x 110″ L Cooling Bed, Trimmer, Model 10026, Schematic Dwg. #C-835893, TRC Engineering Dual Integrated Leak Detector (Blow Molder Unit #1)

Uniloy 4-Head Gal. HDPE Blow Molder, Model 350R2, S/N 3256, Set-Up with Platen Size Aprox. 68-1/2″ L x 15-1/2″ H x 3-1/2″ Thickness, Tie Bar Spacing Center to Center Aprox. 31-1/2″, Aprox. 8″ Head Spacing,  includes Air Barrel Cooling, Controls, Siemens VFD, includes Resin Hopper/Loader, Cooling Bed, Trimmer, Leak Detector (Blow Molder Uninstalled)

Spare Molds

(7) New Half Gal. Molds

(12) Rebuilt Gal. Molds

Regrinders

(3) 2006 Foremost Plastic Resin Regrinders, Model HD5C, S/N 43131, S/N 43307 and S/N 44357 with 30 hp Motor and Blower

(2) Tote Systems with Aluminum Resin Hoppers

Resin Silos

(2) Aprox. 56 Ft. H x 23 ft. Dia. Bolted Construction Steel Resin Storage Silos with Bottom Access Door and Ladders

Aprox. 60 ft. H x 12 ft. 8” Dia. All Aluminum Resin Silo with Bottom Access Door and Ladder

Jug Bagger

2014 Custom Metal Designs Jug Bagger, Model ABA-1001-DR, S/N AB-9668-08-14 with Allen Bradley PLC Controls

Jug Debagger

Dyco Industries Semi-Automatic Jug Debagger, Model HG2812, Aprox. 15 ft. 6” L x 36” W

Jug Conveyor

1000’s of Feet of Gal. and Half Gal. Jug Conveyor with Controls and (2) Annealing Tunnels

Paper and HDPE Filling Lines


2000 Evergreen N8 Small Section Gable Top Carton Filling Line, S/N 1576 including Related S/S Product Conveyor, (2) Pak Tek Pneumatic Casers, Model/S/N RPCE1-158F-4 and Dairy Conveyor All S/S Hydraulic Single Case Stackers (24 Qt. Cases)(Well Maintained)

2004 Filler Specialties 40-Valve Rotary Mono Block Half Gal. Filling Line, Machine #17703GWFS4010L with 10-Station Screw Capper Set-Up for 38 mm Caps, Late Model Velocity Water Fall S/S Cap Feeder System, Set-Up with Square Half Gal. Change Parts, Allen Bradley PLC Controls, S/S Product Conveyor, S/S-Matic Slant Caser and Stacker (Line # 2B)

Federal 26-Valve Rotary Mono Block Filling Line, Machine #1318GW266R748 with Silgan 6-Station Screw Capper Set-Up for DBJ 38 mm Caps, Late Model Velocity Water Fall S/S Cap Feeder System, Set-Up with Square 32 oz. Change Parts, Allen Bradley PLC Controls, S/S Product Conveyor, Statco Enclosed Slant Caser and Stacker (Line # 2B)

Filler Specialties 30-Valve Filler, S/N 5305GWFS3010R with 10-Station Capper (NOTE: To Be Offered – Delayed Pickup March)

Cherry Burrell 2-Lane Qt. Filling Line, Model Q7, S/N 4174 (Filler #Q2) with S/S Product Conveyor, Shared Dairy Conveyor Pneumatic Caser and Stacker (24 Qt. Cases)

(2) Cherry Burrell Half Gal. Carton Fillers, Model CH-5 and Model H-90

Silos, Processors, Mixing & Storage Tanks


(2) Mueller 50,000 Gal. S/S Silos, S/N 3280111-1 (RT8) & S/N 328021-2 (RT3) with Chill Water Jackets, Horizontal Agitators, Sprayballs, Air Valves and Level Sensors

(4) Walker 50,000 Gal. S/S Silos, S/N VSHT-3909R (RT1), S/N VSHT-3908R (RT2), S/N VSHT-6290 (RT7) & S/N 6289-9 (PS-1) with Chill Water Jackets, Horizontal Agitators, Sprayballs, Air Valves and Level Sensors

Walker 30,000 Gal. S/S Silo, S/N 3907R (RT4) with Chill Water Jacket, Horizontal Agitator, Air Valves and Level Sensors

HORIZONTAL S/S TANKS
(2) Cherry Burrell 10,000 Gal. Horizontal S/S Tanks, Model GHW, S/100-789-2963 and S/N 100-78-2962 with Chill Water Jackets, S/S Fronts, Horizontal Agitators, Sprayballs, Air Valves and Level Sensors

(3) Pottersville 6,000 Gal. Horizontal S/S Tanks (Tank #PT2, #PT3 and #PT4) (By-Products Tanks)

(2) Lifetyme 4,000 Gal. Horizontal S/S Insulated Tanks with S/S Fronts, Horizontal Agitators, Sprayballs, Air Valves and Level Sensors (Tank #5 and #6) (Chocolate Tanks)

LIQUID SWEETENER SYSTEMS
Chicago Stainless Equipment 6,000 Gal. Horizontal S/S Tank, S/N 911 with UV (Tank #1)

Stainless Equipment 5,000 Gal. Horizontal S/S Tank, S/N 232-1 with UV (Tank #2)

Tank Level System

Tank Level System with Allen Bradley PanelView Plus 1500 Touchpad Display

Pasteurizing, HTSTs, Homogenizers, & Separators


MILK & BY-PRODUCTS HTST SYSTEMS & PLATE PRESSES

Aprox. 7,000 GPH HTST System #502 with AGC S/S Plate Heat Exchangers, Model AR56-SH, S/N 04163, Fully Outfitted with (380) Pro-5 S/S Plates, (2) Dividers, 4” Top Mounted Nested Holding Tube, Tri-Clover 3” Flow Diversion Valve, Balance Tank, (2) Tri-Clover Centrifugal Pumps, Anderson 2” Flow Meter, Related Valves, Piping and Controls including Shell and Tube Heat Exchanger with Circulating Pump Located in Basement

Aprox. 7,000 GPH HTST System #503 with AGC S/S Plate Heat Exchangers, Model AR56-SH, S/N 12767, Fully Outfitted with (380) Pro-5 S/S Plates, (2) Dividers, 4” Top Mounted Nested Holding Tube, Tri-Clover 3” Flow Diversion Valve, Balance Tank, (2) Tri-Clover Centrifugal Pumps, Waukesha Model 130 UI Timing Pump, Anderson 2” Flow Meter, Related Valves, Piping and Controls including Shell and Tube Heat Exchanger with Circulating Pump Located in Basement

Aprox. 2,000 GPH 2002 Tetra Pak HTST System with Press, Model C8SH, S/N 30105-67421 with (2) Dividers, Tri-Clover Flow Diversion Valve, Nested Holding Tube with Related Valves and Pumps (Located in Roxbury – To Be Offered with Delayed March Pick-Up)

(3) Vitamin Pump Systems with SCI Log Tandem Vitamin Pumps, Model 1081 with (3) Toledo Digital Scales and Printers

Chester Jensen S/S Plate Heat Exchanger, Type HMC, S/N 159715 with (77) S/S Plates

MILK STANDARDIZER SYSTEMS

(2) Online Instrumentation Standardizing Systems, Model OL-7000, with (1) Xycom Touchpad Display includes Related Valves and Meters

HOMOGENIZERS

Gaulin Homogenizer, Model 9000MC100-17TPS, S/N 67655, 5-Piston (Homo #502)

Gaulin/Delaval Homogenizer, Model 900MC100-17TPS, S/N 4652780, 5-Piston (Homo #503)

Manton Gaulin Homogenizer, Type 2150 MC18 25PS, S/N 11642600 with HVA (Located in Roxbury, To Be Offered with Delayed March Removal)

SEPARATOR

Tetra Pak Cold Bowl S/S Separator, Model CMRPX618HGV-74C, S/N 4072393 includes Related Valves, Sensors, VFD Drive, Allen Bradley SLC 5/04 CPU PLC Controls with PanelView 550 Touchpad Display (Recent Complete Overhaul by Tetra & Separators Inc.)

Extensive Case Handling Equipment


(4) CASERS

Dairy Conveyor Pneumatic Caser (N8 Line)

Statco Enclosed Slant Caser (Federal 26-Valve Line)

S/S-Matic Slant Caser (Federal 40-Valve Line)

Additional N8 Caser To Be Added!

(8) CASE STACKERS

(2) Dairy Conveyor All S/S Hydraulic Dual Case Stackers (#S5 and #S8)

(3) Dairy Conveyor All S/S Hydraulic Single Case Stackers (#S3, #S4, #S6) (S6 Utilized with N8 Lines)

(3) S/S Shroud Hydraulic Single Case Stackers (#S1, #S2 and #S7)

CASE CONVEYOR

100’s of Feet of Overhead and Ground Level Case Conveyor System, Most with All S/S Pans and Track, Rex Chain, S/S Inverters, Traffic Cops, Lane Stops and Case Pushers

CASE WASHER & DESTACKERS

Continental Equipment Corp. Aprox. 9 ft. 8” L Pass Through All Stainless Case Washer with Onboard Circulating Pump and Aprox. 5 ft. 7” L Continental Blower Dryer

(2) Hydraulic Case Destackers

CIP Systems


2-Compartment Skid-Mounted CIP System, 200 Gallon with (Aprox. 71” L x 27” H x 24”) Deep S/S Tank, Ampco Centrifugal Pump, WCB Air Valve, Shell and Tube Heat Exchanger and Controls

IDE Single Tank Skid-Mounted CIP System, 60 Gallon with (Aprox. 23” W x 23” W x 27”) H S/S Tank, Ampco Centrifugal Pump, Tri-Clover Air Valves, Shell and Tube Heat Exchanger and Controls

Chemical Handling System including Poly Tanks and Chemical Pumps

Receiving 


2-Bay Receiving Area with Stainless and Steel Constructed Operators Platform, (2) Sprayballs, (2) Stainless Hose Reels, Air Eliminator System with (2) WCB Mix Proof 3” Air Valves, WCB 25 hp and Tri-Clover 5 hp Centrifugal Pumps, Transfer Hoses, Other Related Air Valves and Piping, Online Filters, Check Valves, Anderson Flow Meters and Bell & Gossett Aprox. 45 ft. L x 5 ft. W Shell and Tube Heat Exchanger

Refrigerated Storage Distribution Fleet & Storage Trailers


(28) 2007 – 1998 – International & Kenworth Refrigerated Route Delivery Trucks, most with Cat Diesel Engines, Auto & Standard Transmissions – Most with 24 ft bodies

(7) 2007 – 1996 Mack & Freightliner Tandem Axle & Single Axle Tractors

Over (100) 2004 – 1996 Trailmobile, Utility, Great Dane, Wabash, Fruehauf  48 ft to 33 ft Tandem Axle Refrigerated & Storage Trailers

Continuous Power Generators

Natural Gas Powered

Caterpillar 16-Cylinder All Natural Gas Generator, Model G3516, 956 KVA, 765 KW, 60 hz, 480 V, 1149 Amps, Engine S/N 4EK02568, Water Cooled – Includes Roof Mounted Cooling Tower, Hrs. 63,123.5 (Gen. #5), (SITA Rated – Low Emissions), (Note: Reported In Running Condition)

Caterpillar 16-Cylinder All Natural Gas Generator, Model 3516, 1000 KVA, 800 KW, 60 hz, 480 V, 1203 Amps, Engine S/N 3RC00341, Water Cooled – Includes Roof Mounted Cooling Tower, Hrs. 95,934.3 (Gen #2), (Note: Reported In Running Condition)

Caterpillar 16-Cylinder All Natural Gas Generator, Model 3516, 1000 KVA, 800 KW, 60 hz, 480 V, 1203 Amps, Engine S/N 3RC00340, Water Cooled – Includes Roof Mounted Cooling Tower,  Hrs. 23,807.0 (Gen #1), (Note: Reported In Running Condition)

Diesel Powered

Caterpillar 16-Cylinder Diesel Generator, Engine Model 3516D, S/N 73700135, with WEG / Elect. Machinery Company Generator Pack, Model EM Bemac II Brushless Synchronous, S/N 374926412, 1000 KVA, 800 KW, 60 hz, 480 V, 3 Phase, 1200 Amps, Water Cooled – Includes Roof Mounted Cooling Tower, Hrs. 8978.0 (Gen #3), (Note: Reported In Running Condition)

Caterpillar 16-Cylinder Diesel Generator, Engine Model D399, S/N ?, with WEG / Elect. Machinery Company Generator Pack, Model EM Bemac II Brushless Synchronous, S/N 274926412, 1000 KVA, 800 KW, 60 hz, 480 V, 3 Phase, 1200 Amps, Water Cooled – Includes Roof Mounted Cooling Tower, Hrs. 8978.0 (Gen #4), (Note: Not in Running Condition – Reported Needs Overhauled)

Caterpillar D399 Generator Frame – Uninstalled

Ammonia Refrigeration System (8,000 lb System)


GORGEOUS Refrigeration Equipment updated in 2009 with (6) Screw Compressors, (2) Chillers, (6) Water Towers and all Auxiliary Equipment

2009 Vilter 350 hp Ammonia Compressor, Frame S/N S094974-1 with 3525 RPM, 460 V, 3 Phase, Vission Micro-Controller Touchpad Display and Benshaw Starter, Water Cooled Unit (Unit #5)

2009 Vilter 350 hp Ammonia Compressor, Frame NB #JB48132, S/N S094974-2, 3565 RPM, 4460 V, 3 Phase, Vission Micro-Controller Touchpad Display and Benshaw Starter, Water Cooled Unit (Unit #6)

Mycom 350 hp Ammonia Screw Compressor, Frame Model COS24096-600, SN C99020J-5, Head Model 200 VLD, S/N 2015707 with 3565 RPM, 460 V, 3 Phase, MyPro-CPIV Mayekawa Touchpad Display, R717 (NH3) Refrigerant, Running Time Hrs. 75320, Total Run Hrs. 5210, Ram Starter, Liquid Injection Cooling (Unit #4)

Mycom 200 hp Ammonia Screw Compressor, Frame #COS024096-600, S/N C990209J-2, Head Model 160 VLD, S/N 1615649 with 3570 RPM, 460 V, 3 Phase, MyPro V Mycom Touchpad Display, Ram Starter, Liquid Injection Cooling (Unit #1)

Mycom 200 hp Ammonia Screw Compressor, Frame #COS024096-600, S/N C990209J-4, Head Model 160 VLD, S/N 1615677 with 3570 RPM, 460 V, 3 Phase, MyPro V Mycom Touchpad Display, Ram Starter, Liquid Injection Cooling (Unit #2)

Mycom 200 hp Ammonia Screw Compressor, Frame #COS024096-600, S/N C990209J-3, Head Model 160 VLD, S/N 1616534 with 3570 RPM, 460 V, 3 Phase, MyPro V Mycom Touchpad Display, Ram Starter, Liquid Injection Cooling (Unit #3)

Auxiliary Equipment

2009 ISF Ammonia Receiver, NB A#7982, S/N 09-8320 with Ammonia Accumulator

2009 Parker Rapid Auto Purger, Model V200, S/N R00-11241-36, NB #109

Ammonia System Controls

2-Door Ammonia Refrigeration Control System with Allen Bradley 5/05 PLC Controller, GE Fanuc Touchpad Display and Weksler Pressure Gauges

Evap Condensers

2006 Frick Evaporate Condenser, M/N XLP-XL 850-2 LH, S/N 47750-100, with (2) 5 hp Motors, 1750 RPM, 300 PSIG Design Pressure, R-717 Refrigerant, 200V

2006 Frick Evaporate Condenser, M/N XLP-XL 850-2 RH, S/N 47750-100, with (2) 5 hp Motors, 1750 RPM, 300 PSIG Design Pressure, R-717 Refrigerant, 200V

2004 Frick Evaporate Condenser, M/N XLP-XL 850-2 LH, S/N 40104-1, with (2) 5 hp Motors, 1750 RPM, 300 PSIG Design Pressure, R-717 Refrigerant, 200V

2004 Frick Evaporate Condenser, M/N XLP-XL 850-2 RH, S/N 40104-1, with (2) 5 hp Motors, 1750 RPM, 300 PSIG Design Pressure, R-717 Refrigerant, 200V

Cooler Evaporator Blowers

(4) Imeco 3-Fan NH3 Evaporator Blowers

Freon Cooler Refrigeration System

1,600-Ton Glycol Process Cooling System – Raw and Pasteurized

(2) 2009 GEA Plate Press, Model 12WP-B2-1, S/N D2009000126 and (1) S/N N/A with Surge Drums, Rectangular Tank, Related Valves, Piping, Circulating Pumps and Benshaw Starters (Ammonia Cooled) (Each System Rated @ 800-Ton)

Air Systems


Quincy 200 hp Screw Air Compressor, Model QSI370WNW12A, S/N 94829, Water Cooled (Unit #4)

Quincy 125 hp Screw Air Compressor, Model QSI490W, SN 25112-0-3591, Water Cooled with Benshaw Starter (Unit #3)

Quincy 125 hp Screw Air Compressor, Model QSI-49-W, S/N 255112-0-7663, Water Cooled (Unit #1)

Quincy 125 hp Screw Air Compressor, Model QSI500WNW12ED, SN 92425J, Water Cooled (Unit #2)

Cat 6-Cylinder Skid-Mounted Air Compressor, Hrs. 36533

(2) Vertical Air Receivers

Coders


VideoJet Excel 2000 Ink Jet Coders

Labelers


WS and SMS Pressure Sensitive Labelers

 

Boilers


(2) Cleaver Brooks 300 hp Natural Gas and Oiled Fired Boilers, Model CB667-300

Deaeration System and Water Treatment System

Plant Controls


Process Control Panels, VFDs and Solenoid Control Panels

Lab


Cryoscopes, Microscope, Hot Plates, Scales, Lab Ovens, Freezers, pH Meter, Tables, Countertops, Cabinets, S/S Sink, Glassware

S/S Valves, Pumps and Piping


Air Valve Clusters

(4) Air Valve Clusters includes:

Tri-Clover 15-Valve 3” 761 Series,

Tri-Clover 19-Valve 2-1/2” 361 Series

WCB 8-Valve 2-1/2″

Tri-Clover 18-Valve 2” 761 Series

S/S Solenoid Control Panels

Centrifugal Pumps

Tri-Clover Centrifugal Pumps – Up to 7-1/2 hp

Ampco Centrifugal Pumps Up to 5 hp

Positive Displacement Pumps

Waukesha/SPX Positive Displacement Pumps

S/S Piping

1,000’s of feet of Installed S/S Piping Located Throughout Facility from 1-1/2” to 3” includes Flowverer Stations

Valves & Fittings

Large Selection of Tri-Clover, WCB and Other Air Valves, Check Valves, Fittings, Elbows, T’s, Clamps and Related

Material Handling


 

CHECK BACK FOR DETAILS!

General Plant


(2) Jet Spray S/S Wash Troughs – Aprox. 21” W x 75” L x 16” Deep and Aprox. 29” W x 99” L x 23” Deep

(3) Central High Pressure Wash Systems

Portable Ladders, Stairs, Bug Zappers, Scales, S/S Sinks; S/S Tables, S/S Manifolds; Meters, Gauges, Chart Recorders, Control Stations, Portable Foamers, Ecco Lab Boot Sanitizers, M5000 Hose Mixing Stations, Reelcraft Hose Reels

Spare Parts


Spare Parts including Motors, Drives & Other

Check Back for Details!

Additional Equipment


(2) Cannon S/S Automatic Bossy Loaders

Gaulin Homogenizer

(2) Girton Mix Vats

Labelers

Drill Press; Victor Surface Grinder; Band Saw

Spare Motors and Pumps
(2) Quincy 75 hp and 50 hp Rotary Screw Air Compressors, Model 350 and Model 235

Ammonia Compressors

Additional Air Compressor

York Chiller; Blowers

Dairy Case Conveyor

Maintenance Shop


CHECK BACK FOR DETAILS!

NOTE: Additional Equipment Includes Material Handling, Maintenance Shop, General Plant, Surplus Equipment & More To Be Added


More details coming soon – List Subject to Changes, Additions and Subtractions