Dairy, Food & Bev Processing, Packaging, and R&D Asset Auction at the M Davis Group Showroom

TANKS, PROCESSORS & RELATED EQUIPMENT

(2) Cherry Burrell 20,000 Gallon Capacity Freon Refrigerated Silo Tank, S/N E272-88 & E273-88, Horizontal Agitation, 136” ID, (*****Located in NY State*****)

Cherry-Burrell 1,000 Gal. S/S Batch Processor, M/N EPDA, S/N 1000-80-2475, with Top Mounted Agitation Motor, with Dual S/S CIP Spray Ball, with S/S Legs & S/S Man Ladder (IN#70267)

Aprox. 1,000 Gal. S/S Jacketed Tank, Dome Top Cone Bottom, with 5/2.5 hp 1740/840 RPM Agitator, 460V 3 Phase, Bottom Sweep, Baffle, Sprsyball, Top Hinged Access Door, (Overall Dim. Aprox. 70″ W x 150″) (IN#68960)

(2) 2,000 Gal. Jacketed S/S Fermentation Tank, with Side Mount Man Door, Dome Top Cone Bottom, with 2″ Connections, S/S Legs, Sprayball, Top Insulation, (Overall Dim. Aprox. 80″ W x 172″ H (TK10) (IN#68957) (IN#68956)

Feldmeier Aprox. 500 Gal. S/S Mix Tank, S/N E-820-00, Dome Top Cone Bottom, with Hinged Lid, Bottom & SIde Sweep Agitator with 3 hp/1705 RPM, 230/460 Volts, 3 Phase Drive Motor, Dual S/S Sprayball, S/S Legs, 3″ Clamp Type Connection, 4″ Bottom Connection with Air Acuated Butterfly Valve & Sensor (Aprox. Overall Dims.: 126″ H x 67″ W) (INV#70989)

Aprox. 500 Gal. S/S Single Wall Vertical Tank, Tank DIms.: Aprox. 60″ L x 52″ Dia., with Dual S/S CIP Spray Ball, with Scrap Agitation, with Top Mounted Nord Agitation Motor, Mounted on S/S Legs (INV#70990)

Feldmeier Aprox. 1,200 Gal. S/S Mix Tank, S/N E-927-00, with Vertical Agitator with 1.5 hp/1660 RPM Drive Motor, Dual S/S Sprayball, Mounted on S/S Legs, (2) 3″ Clamp Type Top Connections, 4″ Bottom Connection with Air Acuated Butterfly Valve & Sensor, Overall Dims.: Aprox. 134″ H x 80″ W (INV#70991)

2000 Feldmeier Aprox. 500 Gal. S/S Tank, S/N A-752-00, Dome Top Cone Bottom, with Top Access Door, S/S Legs, CIP Sprayball, Vent, 3″ & 4″ Top Clamp Type Connections, 4″ Clamp Type Bottom Connection with Sensor, Overall Dims.: Aprox. 94″ H x 60″ W (INV#70992)

Aprox. 1,000 Gal. S/S Tank, Dome Top Cone Bottom, with Hinge Top Door, Dual S/S CIP Sprayball, S/S Legs, (4) 2″, 2.5″, & 3″ Clamp Type Connections, 2.5″ Side Connection, 3″ Clamp Type Bottom Connection, Overall Dims.: Aprox. 10 ft. H x 70″ W (INV#70993)

Aprox. 1,000 Gal. S/S Insulated Vertical Tank, Tank Dims.: Aprox. 77″ L x 64″ Dia., with Cone Bottom, with Top Mounted Agitation S/S Rack, Mounted on S/S Legs (INV#73198)

Aprox. 1,000 Gal. S/S Insulated Vertical Tank, Tank Dims.: Aprox. 77″ L x 64″ Dia., with Cone Bottom, with Top Mounted Agitation S/S Rack, Mounted on S/S Legs (INV#73199)

Feldmeier 150 Gal. S/S Likwifier, S/N E-883-08, Empty Weight: 1,200 lbs., with Baldor 20 hp Offset Motor, 1765 RPM, 230/460 Volts, 3 Phase, with S/S CIP Spray Ball, with Top Mounted Dumping Compartment with S/S Hinge Lid, Mounted on S/S Frame (INV#69006)

Aprox. 1,500 Gal. Vertical S/S Tank, S/N T316L, with Internal Heating Coils, Tank Dims.: Aprox. 96″ Tall x 70 Dia., Mounted on S/S Legs (IN#68098)

Feldmeier 150 Gal. S/S Likwifier, S/N E-883-08, Empty Weight: 1,200 lbs., with Baldor 20 hp Offset Motor, 1765 RPM, 230/460 Volts, 3 Phase, with S/S CIP Spray Ball, with Top Mounted Dumping Compartment with S/S Hinge Lid, Mounted on S/S Frame (INV#69006)

Norman Aprox. 150 Gal. S/S Liquifier / Blender, S/N YS – 125 – 452, 4″ & 1.5″ CT Top Inlet Connections, 2.5″ CT Side Connection, Aprox. Overall Dim. 36″ W x 36″ L x 65″ H (Note: Lid Not Included) (IN#69612)

Norman Aprox. 150 Gal. S/S Liquifier / Blender, 4″ & 1.5″ CT Top Inlet Connections, 2.5″ CT Side Connection, Aprox. Overall Dim. 36″ W x 36″ L x 65″ H (IN#69611)

Crepaco Aprox. 500 Gal. Hinged Lid Insulated S/S Tank, S/N C8652, with 5 hp / 1725 RPM 230/460V Agitator with Bottom & Side Sweep, Sprayball, S/S Bottom, 1.5″ Connections, (Aprox. Overall Dim. 6 ft W x 7 ft H) (IN#68963)

Groen 60 Gal. S/S Kettle, S/N 25136, 40 W.P., Mounted on S/S Legs, with (2) S/S Hinge Lids (IN#69011)

Aprox. 160 Gal. S/S Jacketed Vertical Tank, with Vertical S/S Agitation, Rear Mounted Drive (NOTE: Missing Agitiation Motor)(IN#69012)

Aprox. 135 Gal. S/S Single Wall Rectangular Tank, with Side Mounted APV 3 hp Pump, 1755 RPM, 230/460 Volts, 3 Phase, with Aprox. 2″ x 3″ S/S Clamp Type Inlet/Outlet, with Hose, Mounted on Casters (IN#70237)

Alfa-Laval 600 Gal. S/S Jacketed Horizontal Tank, M/N ET600, S/N 71684, with Top Mounted Agitation Motor (INV#68995)

Delaval 600 Gal. S/S Jacketed Horizontal Tank, M/N ET600, S/N 729823 (NOTE:  Missing Top Mounted Agitation & Lid; Missing S/S Leg) (INV#67778)

Girton 200 Gal. S/S Jacketed Rectangular Tank, M/N DX200X, S/N 81031301, with On Board Centrifugal Pump, with Triple Prop S/S Agitator, with S/S Hinge Lid (IN#70590)

MEAT EQUIPMENT

Blentech S/S Vacuum Tumbler, Model VT1-3000-S, S/N 970676 with Aprox. 8 ft. L x 67″ W Tunnel Chamber, Mounted on S/S Frame including Door, Vacuum Pump and Control Cabinet, 1755 RPM, 60 hp, 230/460 V, 3 Phase, (Overall Dimensions 126″ L x 80″ W x 92″ H) (IN#69273)

Nothum S/S Tumbler, M/N NRP-40, with S/S Mesh Infeed Conveyor, Aprox. 40″ W, with Aprox. 46″ Dia. Tumbler, Mounted on Portable S/S Frame (IN#70458)

Jacob & Schmidt 5,000 lbs. S/S Tumbler, S/N TU5-487-1B, Aprox. 48″ Dia. x 172″ L Tumbler, with Hydraulic Power Pack Unit (IN#70460)

VEMAG Stuffer Filler, M/N HP 12E, S/N 1650292, 220-240 Volts, 3 Phase, with S/S Funnel, S/S Tote, Internal Dims.: Aprox. 29-1/2″ L x 25″ W, with Tote S/S Arm (IN#71770)

INSPECTION EQUIPMENT

NEW 2017 Loma Flow-Thru Metal Detector, M/N X5, S/N BXR40011-58237F, with Aprox. 3-1/2″ Dia. Clamp Type Flow-Thru, Mounted on S/S Frame with Touchscreen (IN#70455)

Safeline Flow-Thru S/S Metal Detector, with Aprox. 2-3/4″ Dia. Flow-Thru Tube, 100-240 Volts, with Bottom Mounted S/S Valve, with Digital Read Out, Mounted on S/S Portable Frame (INV#69003)

Safeline S/S Metal Detector Conveyor, with Aprox. 24″ W x 4-1/2″ H Opening, Mounted on Power Conveyor with Interlock Plastic Belt, Overall Dims.: Aprox. 80″ L x 38″ H (IN#69013) 

PACKAGING & FILLING EQUIPMENT

TUCS VFFS, M/N TVF-10-25-C, S/N 0098, with Aprox. 12″ W Discharge Conveyor, with Control Panel Including Allen-Bradley MicroLogix 1500, with Allen-Bradley PanelView 600 Display, Mounted on S/S Portable Frame (IN#70125)

Douglas Horizontal Tray Packer, M/N CMTF/L, S/N M-3569, with Allen-Bradley SLC500 PLC Controller, with Panelview 900 Display, Allen-Bradley 1305 VFD, Servo Drive Controller with Electro Cam Plus 5000 Series Touch Pad Display, with Roll Winder (NOTE: Set-Up to do 12 & 24 Packs) (IN#65912)

Douglas 14 ft. L Shrink Wrap Heat Tunnel, M/N SR10-1524C, S/N M-3570, with Aprox. 28″ W x 10″ H Opening, with Allen-Bradley SLC500 PLC Controller, Allen-Bradley 1305 VFD, & Pacific Motor Controller (IN#65913)

2013 Avery Labeler, Type ALS309, S/N 093261309-ALS309, 100-240 Volts (IN#70996)

Franz 21-Valve Rotary Filler, with Small Section of Infeed, Mounted on S/S Legs, Currently Set-Up for 1/2 Gallon (IN#69002)

WASTE PROCESSING EQUIPMENT

Waste Processing Equipment Max Pak Vertical Hydraulic Baler System, M/N MP60NFS, S/N 12056290, 30 hp, 480 Volts, 3 Phase (Overall Dims.: Aprox. 7′ L x 80″ W x 158″ H), Includes 30 hp Hydraulic System with 1760 RPM Motor, 230/460 Volts, 3 Phase, Aprox. 36″ L x 30″ W x 34″ H Reservoir, Includes 15′ L Inclinded Conveyor with 47″ W Belt with Flights, 1.5 hp Drive, 1725 RPM Motor, 208-230/460 Volts, & Vestil Hydraulic Pivot Dumper, with Self Contained Hydraulic Pump, Aprox. 51″ W x 50″ Deep x 76″ H (IN#70952)

PUMPS

Waukesha 30 hp Positive Displacement Pump, M/N 220U2, S/N 369823-04, with 4″ Clamp Type S/S Head, with 1755 RPM Motor, 230-460 Volts, 3 Phase, Mounted on S/S Frame (INV#70982) 

Waukesha Cherry Burrell 20 hp Positive Displacement Pump, M/N 220U2, S/N 369821-04, with Sterling 1755 RPM Motor, 230/460 Volts, 3 Phase, with S/S Head, with Aprox. 4″ Clamp Type Inlet/Outlet, with (2) S/S Impellers, Mounted on S/S Frame (INV#70983) 

Waukesha Cherry Burrell 20 hp Positive Displacement Pump, M/N 220 U2 2010, S/N 100002501947, with Toshiba 1770 RPM Motor, 460 Volts, 3 Phase, with S/S Head & Impellers, Mounted on S/S Frame (INV#70984)

Ampco 3 hp S/S Positive Displacement Pump, M/N ZP1+030-S0, S/N 1934541-5-2, with Baldor 1750 RPM S/S Clad Motor, New Cost Over $8,000, Less Than 1 Year Old 230/460 Volts, 3 Phase, with Aprox. 2-1/2″ S/S Clamp Type Inlet/Outlet, with Jacketed S/S Head Cover, with S/S Impellers, with (2) Brass Seals (IN#69092)(LOCATED AT MDG AUCTION SHOWROOM–PGH., PA)

Ampco 3 hp S/S Positive Displacement Pump, M/N ZP1+030-S0, S/N 1934541-10-1, with Baldor 1750 RPM S/S Clad Motor, New Cost Over $8,000, Less Than 1 Year Old, 230/460 Volts, 3 Phase, with Aprox. 2-1/2″ S/S Clamp Type Inlet/Outlet, with Jacketed S/S Head Cover, with S/S Impellers, with Plug & Power Cord, with (2) Brass Seals (IN#69093)

Waukesha Cherry Burrell 10 hp Positive Displacement Pump, M/N 130U2, S/N 439532 03, with Toshiba 1745 RPM Motor, 460 Volts, 3 Phase, with Aprox. 3″ Clamp Type Inlet/Outlet, with S/S Head & Impeller (INV#70985) 

Tri-Clover 5 hp Positive Displacement Pump, M/N TSR6NLD-40MDUC-LAO, S/N 289020-01, with Aprox. 3″ Clamp Type Inlet/Outlet, 1680 RPM Motor, 230/460 Volts, 3 Phase, Mounted on S/S Skid (IN#70244) 

Tri-Clover 3 hp Positive Displacement Pump, M/N TC1P3NLD, S/N 541552-D1, with Aprox. 2″ Clamp Type Head, with 1755 Motor, 230/460 Volts, 3 Phase, Mounted on S/S Frame (INV#70986) 

Tri-Clover 5 hp Positive Displacement Pump, M/N TCIP, S/N 541550-01, with Baldor 1750 RPM Motor, 208-230/460 Volts, 3 Phase, with Aprox. 2″ Clamp Type Inlet/Outlet, Mounted on S/S Frame (INV#70987)

Tri-Clover 3 hp Positive Displacement Pump, M/N TC1P3NLD, with Aprox. 2″ Clamp Type Head, with 1755 RPM Motor, 460 Volts, 3 Phase, Mounted on S/S Frame (IN#70988)

Tri-Clover 5 hp Positive Displacement Pump, M/N PR1125-21/2/2MUC4-WT-S, S/N 130361-01, with Aprox. 2-1/2″ Clamp Type Inlet/Outlet, with Reliance 1160 RPM Motor, 230/460 Volts, 3 Phase (INV#69004) 

Tri-Clover 5 hp Positive Displacement Pump, with Aprox. 2-1/2″ Clamp Type Inlet/Outlet, with Reliance 1160 RPM Motor, 230/460 Volts, 3 Phase (INV#69005) 

APV 20 hp Centrifugal Pump, M/N PP 944-99, S/N 8V2, with Baldor 3520 RPM Motor, 230/460 Volts, Mounted on S/S Portable Frame(IN#69008)

OTHER ASSETS OF INTEREST  

360 Gal. (1340 Ltr.) Batch / Butter Churn with 180 Gal. Capacity. Seller Reports: Depending on percentage of fat content of cream will determine yield. 40% cream would produce 725 pounds lbs. butter per batch. With Cultured cream, at correct acid level, we have produced 900 lbs. butter. With added salt, expect an other 1 1/2%. Previously used in a French Dairy Operation Run by Nuns. Rebuilt in 2013-2014 by Van Zant of the Netherlands. Primarily used for whey cream butter, sweet cream butter, cultured cream and compound butter (INV#60687)

Blentech Twin Shaft S/S Cooker Model CC 1000 V, SN 91689, Includes Pneumatic Hinged Lid, Top Hinged Safety Door, (Note: Twin Augers are Bent, also Missing Agitator Drive Motors), (Note: Controls Not Included), (Aprox. Overall Dim. 103″ L x 75″ W x 107″ H) (INV#69332)

S/S Jet Spray COP Traugh, with On Board Heat Exchanger, Overall Dims.: Aprox. 80″ L x 38″ W x 37″ H Mounted on S/S Portable Frame (IN#68099)

ElectroPure Continuous Flow High Capacity EDI Water Module, M/N EXL-710-HTS, S/N 1710012, Low Maintenance & No Chemical Way to Deliver High Purity Water, Rated 22 to 35 RPM, Rated: 5.0 – 8.0 cu.m/ Hr. (IN#69702)

APV S/S Ribbon Blender & Auger Feeder, S/N K-0784, with Aprox. 9″ Dia. S/S Auger & Discharge, with SEW 3.5/4.5 Drive, 1700 RPM, Mounted on S/S Portable Frame, Includes APV 7.5 hp Positive Displacement Pump, M/N R4BR1HD, S/N K-0785-94, with 1730 RPM Motor, 230/460 Volts, with Aprox. 3″ Thread Type Inlet/Outlet with Aprox. 9″ Dia. Centrifugal Inlet/Outlet, Mounted on Portable S/S Frame (IN#70238)