Fluid Dairy Processing & Packaging Equipment Auction
Featured Auction
AUCTION | ONLINE ONLY | APRIL 24, 2017 – APRIL 27, 2017
Tanks, Pumps, Processors & More!
Over 350+ Lots Available
EQUIPMENT LOCATED IN NORTH CAROLINA
CNP Centrifugal Pump 5.5HP 1in IN 2in OUT Model: YS9052 S/N: 3500 (Located in NC) ***FBEV***
ERVE 5HP Model: 3X1.5X5F S/N: A00142 (Located in NC) ***FBEV***
US Motor 25HP for Angelus 120L Seamer 1770RPM Model: T811 (Located in NC) ***FBEV***
TriFlow Pump 20HP Model: C328MD25T-S S/N: Y0029 Missing Head (Located in NC) ***FBEV***
Fristam Centrifugal Pump 15HP 3in IN 2in OUT S/N: FPX742961802 (Located in NC) ***FBEV***
Waukesha Positive Displacement Pump 1HP .5in IN .5in OUT 330/575 Volts Model: 6U1 S/N: 159043 (Located in NC) ***FBEV***
Goulds Pumps Centrifugal Pump 7.5 HP Model: 3656 Index: 5BF1K2HO Size: 1 1/2X2 (Located in NC) ***FBEV***
CNP Centrifugal Pump 5.5HP 1in IN 2in OUT Model: YS90S2 S/N: 3455 (Located in NC) ***FBEV***
Waukesha Centrifugal PURITI Pump 5 HP Model: 216 S/N: 231324 98 Missing Head (Located in NC) ***FBEV***
Waukesha Positive Displacement Pump Model: 220 Serial:411740-06 4.5in IN 4.5in OUT, Mounted on a Stainless Steel Plate, 7.5 HP 230/460 Volt 60 Hz (Located in NC) ***FBEV***
Waukesha Positive Displacement Pump Model: 220 Serial: 13220 SS 4.5in IN 4.5in OUT, Mounted to Stainless Steel Plate, Includes Leeson Speedmaster Adjustable Speed AC Motor Control, Side Mounted Motor 10 HP 575 Volt 60Hz 3 Phase (Located in NC) ***FBEV***
Waukesha Positive Displacement Pump Model: 220 Serial: 11671 SS 4.5in IN 3.5in OUT, Mounted on Steel Plate, Side Mounted Motor 7.5 HP 575 Volt 60 Hz 3 Phase (Located in NC) ***FBEV***
Tri-Clover Positive Displacement Pump Model: PRR125-3M-UC4-ST-S Serial: R3666 3.5in IN 3.5in OUT, Mounted on Stainless Steel Plate, Side Mounted Motor 7.5 HP 575 Volt 60 Hz 3 Phase (Located in NC) ***FBEV***
LKH Centrifugal Model: MR-200 Serial: 01-7-26348 3.5in IN 3.5in OUT, Motor – 15HP 230/460 Volt 60 Hz 3 Phase (Located in NC) ***FBEV***
Waukesha Positive Displacement Pump Model: 130 Serial: 131203 3.5in IN 3.5in OUT, Mounted on a Steel Plate, Motor – 7.5HP (Located in NC) ***FBEV***
Centrifugal Pump 2.5in IN 2in OUT, Motor – 7.5HP 230/460 Volt 60 Hz (Located in NC) ***FBEV***
Centrifugal Pump 2.5in IN 2in OUT, Motor – 7.5HP 230/460 Volt 60 Hz 3 Phase (Located in NC) ***FBEV***
Tri-Clover Centrifugal Pump Model: C218MD18T-S-5-1 Serial S04290 2.5in IN 2in OUT, Motor – 5HP 230/460 Volt 3 Phase (Located in NC) ***FBEV***
Unibloc Positive Displacement Pump Serial: 10532 2in IN 2in OUT, Mounted on a Stainless Steel Plate, Motor – 7.5HP 230/460 Volt 60Hz (Located in NC) ***FBEV***
Polar Air Steel Air Compressor Tank PSI 450 Part Number: A12410 (Located in NC) ***FBEV***
Ozonia Ozone Generator 1999 Model: CFS-1A S/N: CH-CFS-1A262, On Stainless Steel Stand (Located in NC) ***FBEV***
Aquionics Ultra-Violet Water Treatment Unit Model: PMD200C/1/4A D Serial: 050126, Rated Pressure: 10 Bar, Rated Temperature: 80ºC, 610 Volt 4.2 Amps 2.5 kWatts, Mounted on Stainless Steel Frame (Located in NC) ***FBEV***
Filterite Water Polishers with Filters Model: 910717-000 S/N: LG Pressure 150 PSIG at 200 Degrees, Diameter 8in x Length 36in, 2.5in IN 2.5in OUT (Located in NC) ***FBEV***
Filterite Water Polishers with Filters Model: 910717-000 S/N: LG Pressure 150 PSIG at 200 Degrees, Diameter 8in x Length 36in, 2.5in IN 2.5in OUT (Located in NC) ***FBEV***
Accu Mass Am 200 Flow Sensor Model: RFT9739E43UJ RFT S/N: 1713731 Sensor S/N: N-85-250 VAC (Located in NC) ***FBEV***
Hindsight 2020 Camera for Production Lines Model: 100A Serial: 000106, Hindsight 2020CAM is a video event capture tool that is used to replay events in detail and in slow motion. The system continuously records video signals into a video circular buffer and displays the contents of the buffer while recording is in progress. When an event happens, the operator views the event in the buffer and can manually mark the event for archiving. An event video clip can also be made automatically by an interface to a control system, process upset sensor, or vision analysis system. Events are stored with the event information for easy review of the event history. Extreme high-speed applications take advantage of Hindsight 2020CAM’s fast recording speeds ranging from 125 up to 10,000 frames per second. Hindsight 2020CAM never stops recording…ever. Video is continuously recorded to solid state drives in the base of the Hindsight 2020CAM Engine unit. Ethernet Capability, Power Cables and Computer Station all included (Located in NC) ***FBEV***
Video Jet Ink Jet Coder Model: 43S S/N: ZH061930012, On Stainless Steel Stand with Casters (Located in NC) ***FBEV***
Video Jet Ink Jet Coder Excel Auto Flush Model: 273SE S/N: 062721040WD (Located in NC) ***FBEV***
Hitachi Ink Jet Coder Model: PXR-D260W Serial: PXR14795002, Single Head Ink Jet Coder, 120-240 Volts, Stainless Steel Cabinet, Last running on PET Bottling Line, Last Operational December 2016 (Located in NC) ***FBEV***
Dayton Industrial Motor 2.2HP Model: 3KW33G S/N: HS B2078001016 (Located in NC) ***FBEV***
Easy Pac Glue Unit Model: 8KG Year: 2008, Purchased for use in bottling plant and never installed, Brand New in Box (Located in NC) ***FBEV***
Nordson ProBlue 10 Model: 1022236A Serial: SA07D37929, 200-240 Volt 50/60 Hz 35 A, Mounted on a 4ft High Stainless Steel Frame, Includes Nordson Eclipse Series Pattern Control System Model: EPC-15 (Located in NC) ***FBEV***
Nordson ProBlue 10 FulFill Model: 1081409A Serial: SA09J60948, 200-240 Volt 50/60 Hz 27 A (Located in NC) ***FBEV***
Nordson Glue Unit Hose and Kit S/N: AN09H66954 Kit: AN07C Year: 2011, Brand New in Box (Located in NC) ***FBEV***
Nordson Glue Unit Hose and Kit S/N: AN09H66954 Kit: AN07C Year: 2012, Brand New in Box
Automatic 2 -way and 3-way Air Valves, (4) 2-way Air Valves 1 3/8 inch, (14) 2-way Air Valves – Range from 3/4 inch to 1 7/8 inch, (7) 3-way Air Valves 1 7/8 inch, Miscellaneous Piping and Tri-clover Clamps
Vilter 6 Cylinder Ammonia Compressor Model: A11K 456 XLB, Last running at Soft Drink Facility, Reason for removal was modification to freon based system instead of ammonia, Will sell the entire package or individual compressors, 100 HP Motors, Controls with starters are included, Last running October 2016 (Located in NC) ***FBEV***
Vilter 8 Cylinder Ammonia Compressor Model: A11K 458 XLB, Last running at Soft Drink Facility, Reason for removal was modification to freon based system instead of ammonia, Will sell the entire package or individual compressors, 100 HP Motors, Controls with starters are included, Last running October 2016 (Located in NC) ***FBEV***
Parker Hot Water Boiler Model: 331 Square Feet Serial: 52063 Year: 2000, 331 Square Feet, Certified, 125 PSI, Max Water Temperature of 250ºF, Made in 2000, Last supported bottle warming tunnel at soft drink facility, good condition (Located in NC) ***FBEV***
Atlas Copco GA75 Air Compressor Serial: 8972435275, 75 Horsepower Compressor, Last used at a bakery plant, 460 Volts, 3PH, 60HZ, 120 Full Load Amps (Located in NC) ***FBEV***
Parker Hot Water Boiler Model: 331 Square Feet Serial: 52063 Year: 2000, 331 Square Feet, Certified, 125 PSI, Max Water Temperature of 250ºF, Made in 2000, Last supported bottle warming tunnel at soft drink facility, good condition (Located in NC) ***FBEV***
Atlas Copco GA75 Air Compressor Serial: 8972435275, 75 Horsepower Compressor, Last used at a bakery plant, 460 Volts, 3PH, 60HZ, 120 Full Load Amps (Located in NC) ***FBEV***
Ingersol Rand 1700 Air Dryer Model: D1700INA400 Serial: 337155, Last running at Food Processing Plant supporting Air compressors, last operational 2016, 460 Volts 60Hz 3 Phase, Refrigerant is R404, Very Good Condition (Located in NC) ***FBEV***
Laning Conveyor, 24in wide belt, 14ft 6in long laner, begins with single file and separates product into six lanes, includes 1.5HP belt drive motor (Located in NC) ***FBEV***
Roach Conveyor Inline Case Switch Serial: 421375, Last used at a beverage plant to divert cases – condition is excellent, measures approx. 8 feet long x 3 feet wide, drive motor included, Intralox Plastic Belt Conveyor with Rubber rollers to divert cases (Located in NC) ***FBEV***
Alliance 8×8 Bi-directional Accumulation Table, 8 feet by 8 feet, Stainless Steel Construction with Plastic Intralox Belting, Last running .5L, 20oz, 24oz, 1L, 1.89L, 3.78L PET Bottles, Good Condition, Last used in service December 15th, 2016 (Located in NC) ***FBEV***
APV Crepaco Stainless Steel Heat Exchanger Model: R56-S S/N: 20557, Stainless Steel Construction, Last used in Blending Room to warm water, Very Good Condition (Located in NC) ***FBEV***
Tetra Pak Plate and Frame Heat Exchanger Model: MS6-SR Serial: 30105-68914 Year: 2003, Manufactured by Alfa Laval, MAWP 145 PSI at 230ºF, MDMT -20ºF at 145 PSI, Area: 230.48 sq. ft., “A” Dim: 712mm with 162 0.60mm Plates (Located in NC) ***FBEV***
Alfa Laval Plate and Frame Heat Exchanger Model: M10-MFG Serial: 30105-54325 Year: 2000, MAWP 150 PSI at 230ºF, MDMT -20ºF at 150 PSI, Area: 42.61 sq. ft., “A” Dim: 89mm with 20 0.50mm Plates (Located in NC) ***FBEV***
York Plate and Frame Heat Exchanger Serial: 9503402 Patent Number: 1992097, Stainless Steel Plates, Can be used to heat/chill product, Good Condition, Last used in Food Plant **Sale Subject to Seller Confirmation** (Located in NC) ***FBEV***
Ecolab Single Tank CIP System Model: 5400 Control and 3001 Skid Serial: 24101 Year: 2002, Single Tank, Skid Mounted System, Allen Bradley Controls, Includes 2002 Enerquip Tube Heat Exchanger rated to 150 PSI and 375ºF with Centrifugal Pump, Tri-Clover Air Actuators, Last used in Dairy Plant to CIP Tanks/Supply Lines (Located in NC) ***FBEV***
Highland 2 Tank CIP System with Bell and Gossett Heat Exchanger Tank Serial: H19212, On a Stainless Steel Frame, Anderson Chart Recorder, Endress & Hauser Metering Unit, Allen Bradley 503 PLC, Tri-Clover Centrifugal Pump Model: C216MID21TS Serial: 6057 7.5HP 575 Volt; B&G Serial: 137219-01 Shell Side: MAWP 150 PSI at 375ºF MDMT -20ºF at 150 PSI, Tube Side: MAWP 125 PSI at 375ºF MDMT -20ºF at 125 PSI, Waukesha Centrifugal Pump 7.5HP 230/460 Volt 60Hz 3 Phase (Located in NC) ***FBEV***
Cherry Burrell 7500 TGR Homogenizer Serial: 271298, Stainless Steel Construction, Last used in a Hot Fill Processing Plant, In production till December 15th, 2016, Max 5800 Gallons Capacity, Operating Max Pressure 1900, Motor Size is 150HP
Batching Blender 200 Gallon TankStainless Steel, Single Agitation, Baldor 2HP 208-230/460 Volt 60 Hz 3 Phase, Mounted to a Stainless Steel Frame, Includes Tri-Clover Centrifugal Pump Model: C216MF18T-S Serial: P0874 (Located in NC) ***FBEV***
Breddo 200 Gallon Likwifier Tank with 40 HP Motor Model: LOS 200 Serial: D-530935-5, Stainless Steel Construction, Last used at food processing facility, 40 HP Offset Motor, Condition is Good and Clean (Located in NC) ***FBEV***
DCI 300 Gallon Jacketed Mixing Tank Serial: 87-D-34799C, Stainless Steel Construction, Dome top with Top entering .5HP agitator, 18″ Diameter top manhole, Side mounted access ladder, Jacketed Tank, Last mixing juice/food products (Located in NC) ***FBEV***
Dairy Craft 6,000 Gallon Stainless Vertical Silo with Agitator Serial: 77J3387, Stainless Steel Construction, Double Insulated and Refrigerated, Top Mounted Agitator, Side Alcove with Manhole, Last used in a Beverage Plant, Last ran Orange Juice Concentrate, Refrigeration only held temperature – did not chill the product (Located in NC) ***FBEV***
Cherry-Burrell 4,000 Gallon Vertical Mixing Tank, Stainless Steel Construction #4 Finish Inside, Side Manway, 5HP Side and Top Agitation, CIP Spray ball, Dome Top – Dome Bottom – 12 Gauge, Center Discharge on Bottom, Multiple Inlets at Top, Last used in Beverage Application (Located in NC) ***FBEV***
Cherry-Burrell 4,500 Gallon Vertical Mixing Tank, Stainless Steel Construction #4 Finish Inside, Side Manway, 5HP Side Agitation
CIP Spray ball, Dome Top – Dome Bottom – 12 Gauge, Center Discharge on Bottom, Multiple Inlets at Top, Last used in Beverage Application(Located in NC) ***FBEV***
500 Gallon Stainless Steel Jacketed Processing Tank, Jacketed Tank – last used in food processing plant, Dish Head, Dish Bottom, Top Agitation, 75in Diameter x 105in Tall, Bottom Discharge, Top Manhole (Located in NC) ***FBEV***
Regis 5,000 Gallon Horizontal Jacketed Stainless Storage Tanks, Serial Number: 3686, Stainless Steel Interior, Mild Steel Exterior, Last used at Soft Drink Plant storing HFCS-55 Syrup, Jacketed for Freon, Glycol, Hot or Cold Water, Top Mounted Agitator, Dual CIP Spray balls, Front Manhole, Bottom Front Discharge Outlet, In use up to July 4th, 2016 (Located in NC) ***FBEV***
Cherry-Burrell 5,000 Gallon Horizontal Jacketed Stainless Storage Tanks, Model: E Serial Number: 69-128-1, Stainless Steel Interior, Mild Steel Exterior, Last used at Soft Drink Plant storing HFCS-55 Syrup, Jacketed for Freon, Glycol, Hot or Cold Water, Top Mounted Agitator, Dual CIP Spray balls, Front Manhole, Bottom Front Discharge Outlet, In use up to July 4th, 2016 (Located in NC) ***FBEV***
Cherry-Burrell 500 Gallon Jacketed Processor Tank Serial: E-313-90 Year: 1990, 316L Stainless Steel Interior with #4 Polish, Jacketed for 400ºF at 150 PSI, Top mounted 5HP Scrap Surface Agitator with heavy duty gearbox, Top Manhole, Cone Bottom Drain, Stainless Steel Legs, Last used in a Food Plant
SFI 3,000 Gallon Insulated Storage Tank S/N: 4378-5, Made by Sanitary Fabricators, Insulated Fermentation Tanks, Last used in Yogurt Plant, Multiple Inlets on Top of Tank, Cone Bottom with S/S legs, Top Manway opening of 18in, Projectile Well for RTD and Thermometer, #4 Finish, CIP Spray ball, 3in Chloride and Asbestos Free Fiberglass Insulation, 108in Diameter x 156in Height (Located in NC) ***FBEV***
Feldmeier 6,000 Gallon Vertical Single Wall Batch Mixing Tank S/N: N-313-00, Stainless Steel Construction, #4 Finish internal, CIP Spray ball, Dome Top, Dish Bottom, Center Discharge on Bottom, Several Inlets at top, Vertical Tank with Top Mounted Agitator, Last used as a blend tank in large juice facility, Mounted on SS Legs, Top Manhole, Made in 2000, 123in Overall Diameter x 207in Overall Height (Located in NC) ***FBEV***
Potter & Rayfield 1,000 Gallon Stainless Steel Vertical Mixing Tank S/N: 416, Single Wall Tank, Last used in Soft Drink Plant, Flat Top – Top Manhole, Sloped Bottom, Stainless Steel Legs, Side Agitation, 65in Diameter x 91in Height (Located in NC) ***FBEV***
Cream City 7800 Gallon Horizontal Stainless Steel Storage Tanks, Stainless Steel Construction, Front Manhole Access, Center Front Discharge, Mounted on Legs, Last used in Soda Blending Room to store product, In Operation up to October 2015
Cream City 7800 Gallon Horizontal Stainless Steel Storage Tanks, Stainless Steel Construction, Front Manhole Access, Center Front Discharge, Mounted on Legs, Last used in Soda Blending Room to store product, In Operation up to October (Located in NC) ***FBEV***
2,700 Gallon Vertical Stainless Steel Mixing Tank, Stainless Steel Construction, Last used December 15th, 2016 in production, Top Mounted Agitator, Dome Top/Dish Bottom, Last used in Beverage Facility (Located in NC) ***FBEV***
10,000 Gallon Stainless Steel Vertical Silo, Stainless Steel Interior and Exterior, Side Manhole, Last used in a Beverage Plant, Sloped bottom to drain (Located in NC) ***FBEV***
Miura Steam Boiler Model: LX-200 Serial: 47S472153 Year: 2007, Last used in Hot Fill Bottling Plant for Plant Steam Requirements. 200 Horsepower, 6,900 Pounds/Hour Steam Capacity, Maximum Working Pressure – 170 PSIG, Heat Output – 6,695,000 BTU per Hour, 85% Fuel to Steam Efficiency, 387.7 Heating Surface Area, Weight is 8,600 Pounds, Design Temperature 400ºF, Combustion is Proprietary Forced Draft, Step Fired Modulation Hi-Low-Off, Electric Spark Ignited, 460 Volts, 3Phase, 60HZ, Electrical Consumption of 24KVA, Fuel Type is Natural Gas or Propane, Gas Consumption is 7,850 SCFH, Main Steam Outlet Valve is 3 inches, Chimney Diameter is 20 inches, Ultraviolet Flame Eye Sensor, Adjustable Pressure Transducer and Switch, Excellent Condition, Last in Operation December 2016 (Located in NC) ***FBEV***
Tetra Pak / Feldmeier Dual Pasteurization Skid for Hot Fill Serial: S81106B Year: 2006, Includes 62 pass jacketed tube network, Rated for 80 Gallons/Minute, 50 gallon balance tank, Fristam 5HP and 10HP pump, Micromotion 1.5 inch Flow Meter, Anderson Chart Recorder and Temperature Controls, Tri-Clover Air Valves, Calibrated March 2014, Connecting holding tube, Last processing Hot Fill Tea up to 185ºF and 220ºF, In Use August 2014 (Located in NC) ***FBEV***
Fortress Phantom Metal Detector for Bottles Serial: F8656-5608 Year: 2005, Currently setup with Bottle Conveyor to detect foreign metal on water bottling line, last ran 12oz. up to 1L PET Bottles, Very Good Condition, Includes Air Blower Rejector, Aperture opening is 4 inches wide x 10 inches tall (Located in NC) ***FBEV***
Mettler-Toledo Check Weigher Model: XS Serial: 07028521 Year: 2007, Stainless Steel Construction, Operator Color Touchscreen, Max weight (2 pounds), Min weight (1/2 pound), Last running 8oz, 16oz, 32oz. packages of cheese, Mounted on Conveyor Stand with 3 Foot long reject conveyor system and drive motor, Can run 150 packages per minute, 110 volts, 50/60 Hertz, Good Working condition (Located in NC) ***FBEV***
Delkor Spotpak Top Load Case Packer Model: SP-RH-SL S/N: SP-2059, Robust gantry style pick-and-place robot assembles Spot-Pak shippers at production rates up to 150 primary package containers per minute. Designed for safe and reliable performance in a washdown environment. Last setup for Yogurt type tubs onto a flat board tray, Loads product from top using suction cups, all stainless steel construction, Allen Bradley Micrologix PLC, Good Condition (Located in NC) ***FBEV***
Pace 75 Cubic Foot Bottle Hopper for Unscrambler, Stainless Steel Construction, Last used with Pace M600 Bottle Unscrambler, Mounted on casters for easy portability, Good Condition, Motor Included for Incline Pleated Belt (Located in NC) ***FBEV***
US Filter Reverse Osmosis System with Pre Treatment Model: MK-90 Serial: A02103, 6 Membrane System, Last supporting Beverage Plant running 90 gallons/minute, High Pressure Pump and Pre filters included, Control Panel with associated valves & pipes, Pretreatment Filters and 2 Tanks Included, Last ran Production December 15, 2016 (Located in NC) ***FBEV***
Zepf Technologies/Meyer Hawk Uncaser Model: HU-10 S/N: 9085, Last setup for 16oz. and 20oz. Beer Bottles up to 600 BPM, Setup for 480 volts, 3 phase, 60 hertz, Stainless Steel Shrouding, Adjustable to run 12packs and 24 packs with change parts
Wayne Automation Corps Case Erector S/N: 1870-3120, Fully Automatic Cases Erector with Extended Infeed Magazine for Blanks (Holds 450 Cases), *Missing Glue System*, Will run RSC or HSC Cases, Last making 12 pack boxes but will erect assortment of box sizes, Adjustable – Quick and Easy Changeovers, Light Curtain for Safety, Speeds up to 35 cases per minute, 480 Voltage, 3 Phase, 60 Hertz (Located in NC) ***FBEV***
Hartness 100 Case Packer Model: 100, Stainless Steel Construction, Grids for .5L in 24 packs and 2L in 8 packs, Dependable and Reliable unit, Will pack into plastic shells or boxes (Located in NC) ***FBEV***
Sentry S Style Lowerator Gripper Rinser with Ionized Air, Stainless Steel Construction, Uses Ionized Air to Clean Bottles Prior to Filling, “D” Style Soft Touch Gripper Bubbles with HP1873 Rexnord, Electrics – 460 Volts, 3PH, 60HZ, Very Good Condition, Dimensions: 92” long x 42” wide x 141” tall, 42.5” Discharge Height – Middle of Gripper, 138.5” Infeed Height – Middle of Gripper, Setup: 12oz, 20oz, 500mL, and 2L PET Bottles (Located in NC) ***FBEV***
I&H 8×30 Stainless Steel Can Warming or Cooling Tunnel, Stainless Steel Construction, Plastic Intralox Bed measures 8 feet wide x 30 feet long, includes pumps, tube and shell heat exchanger, control panel, last ran 12oz. cans at 1100 CPM, Last ran 2014 (Located in NC) ***FBEV***
Sidel SBO 20 Linear Pre Heat Tunnels for Blow Molder, Model SBO 20 Serial 5004 Year 2003, Last used in blow molding factory for PET Bottles, Good parts machines – not complete (Located in NC) ***FBEV***
Sidel SBO 20 Linear Pre Heat Tunnels for Blow Molder, Model SBO 20 Serial 5004 Year 2003, Last used in blow molding factory for PET Bottles, Good parts machines – not complete (Located in NC) ***FBEV***
SWF McDowell Model 201 Case Erector with Nordson Glue Model: CE 201RH Serial: 958R Year: 2002, Compact Machine for Small Spaces, Automatic Case Erecting with manual adjustments for different case sizes, Includes Nordson ProBlue Glue Unit, Allen Bradley Micrologix 1500 PLC, 230 Volts, Good Clean Machine, Extended Magazine for Blanks (Located in NC) ***FBEV***
Kisters Kayat Shrinkwrapper Year: 2002 Model: SW35 S/N: 103-02, Last used to shrink wrap Bottles in trays, continuous motion wrapping bar, Clear Film or Print Registered Film, Heat Tunnel included with Single Fan, Runs up to 35 cycles/minute, 460 Volts, 3 Phase, 60 HZ, Steel-It Gray Paint, Film Feed Assembly, Central Point Lubrication, 80 PSI Air Minimum, Turbo Cooling, Left to Right Flow standing at Main Operator Panel, Good Condition (Located in NC) ***FBEV***
Padlocker Tape Case Erector Model: KD-24S S/N: 3558, Uses tape to seal bottom of boxes, compact machine, Versatile and Flexible Unit, Small Footprint, Easy Load Magazine, Mitsubishi PLC Controls, Speeds 10 cases per minute (depending on case size), adjustable machine, 240 Voltage, 60HZ, 3PH (Located in NC) ***FBEV***
3M Automatic Tape Case Sealer, Portable Unit – last used in food processing plant, Automatic closes 4 flaps and seals with tape (Located in NC) ***FBEV***
Quadrel Pressure Sensitive Labeler, Model: VersaLine S/N: Q697-074, Full Wrap Around Labeler for Round Bottles, Year 1997, Inline pressure sensitive labeler with coder, Equipped with coder, timing wheel, wrap around belt and integrated 8′conveyor, Power requirements are 110VAC/60Hz Single Phase (Located in NC) ***FBEV***
HTST Pasteurizer System Serial: 813217, Last running 2,500 Gallons/Hour, Includes HTST Plate and Frame System, Balance Tank, Stainless Steel Control Panel with Chart Recorder and Temperature Controls, Last supporting Hot Fill Beverage Line at 300 Bottles/Minute on 300mL, 450mL, 473mL, 500mL and 591mL PET Bottles at 185ºF, Last in Production December 15th, 2016 (Located in NC) ***FBEV***
Alcoa 8 Head Capper Model: 200E-CF1400-08 S/N: 200E0069, Year 2007, 8 Head ROPP (Roll On Pilfer Proof) Capper designed to run 350 bottles per minute, last running 750mL Glass Bottles with a 33mm ROPP Aluminum Cap around 100 bottles per minute, Left to Right feed (clockwise rotation), Stainless Steel Package, Hopper, Sorter, Chute and Cap Blower all included, 460 Volts, 3 Phase, 60Hertz, Allen Bradley MicroLogix PLC with Power Flex Drives, Allen Bradley Panelview 300 Touchscreen, Plexiglass Guarding, Top of the line capper, Used Very Little in Service – Low Hours (Located in NC) ***FBEV***
Lantech Automatic Pallet Stretch Wrapper with Conveyors Model: S1503 Serial: SC001273, Automatic Pallet Wrapper with 5 Foot Infeed and 10 Foot Discharge Conveyors at 17″ Elevation, 460 Volts, 3PH, 60HZ, 80 PSI, Rotary Tower to Wrap Pallets without turning pallet, Safety Caging, Wraps up to 45-60 Loads per hour, Allen Bradley SLC 5/04 Controller, 20″ Roll Carriage, 200% Pre-Stretch, Max Pallet Weight 4000 Pounds, Skidded and Ready to Ship – Last operated November 2016 (Located in NC) ***FBEV***
B&H Inline Roll Fed Labeler Model: 1600 Serial: 2534/0302/1418L Year: 2002, Inline Roll Fed Labeler – last running PET Bottles, Speeds up to 300+ Bottles/Minute, Small Footprint, Includes Operator touchscreen, Will run containers from 1.98 inches to 5.7 inches in diameter, Label Lengths from 6.5 inches to 18.4 inches, 460 Volts, 3PH, 60HZ (Located in NC) ***FBEV***
Skid Mounted Flavor Injection System, Last injecting Mint Flavor inside water for bottle water facility, (2) Endress Hauser Flow Meters, Waukesha Positive Pump S/N 406418-06 and S/S Filter, Documentation Included, 7000 gallons/water with 7 gallons of extract would run 50,000 bottles on a 6 hour run – 500mL PET Water Bottle (Located in NC) ***FBEV***
Solbern Liquid Cascade Filler Model: LFF-103 Serial: 25054 Year: 1993, Stainless Steel Construction, Converted in 1997 to run with Angelus 120L Seamer, 79 Funnels, 4 Inch Pitch, Runs up to 1,000 containers per minute (depending on size) (Located in NC) ***FBEV***
Hartness 825 Serial: 8 145 RW 8 566, Stainless Steel Construction, 505 PLC, Allen Bradley PanelView Plus 600, 2×3 96oz Grid, Soft Drop Pack Capable (Located in NC) ***FBEV***
Lantech Q1000 Automatic Pallet Stretch Wrapper Model Q1000 Serial: 001648, Automatic Pallet Wrapper with 5 Foot Infeed and 5 Foot Discharge Conveyors at 18inches Elevation, 460 Volts, 3PH, 60HZ, 80 PSI, Safety Caging, Wraps up to 45-60 Loads per hour, Max. Pallet Height – 80inches, 20inches Film, 200% Pre-Stretch, Max Pallet Weight 4000 Pounds (Located in NC) ***FBEV***
Barry-Wehmiller Flash Pasteurization Skid Serial 61180 Year: 2011, Setup for Juice or Lightly Carbonated Cider, 100 Gallons/Minute, Incoming Product Temperature 65ºF minimum – incoming product temperature max is 85ºF, Target Hold Time 15 seconds, 460 Volts, 3PH, 60HZ, Water 40 PSIG, Air 80 PSIG, Steam PSIG, Includes APV Multi-Section Plate Heat Exchanger – Model R5 R-15, 150 PSIG at 293ºF Max Temperature, Holding Tube for Pasteurization, Control and Steam Valves, Stainless Steel Construction, Fristam High Pressure Pumps, Allen Bradley Control Logix PLC with PowerFlex Frequency Drives and Operator Panelview 1000 Touchscreen, Optimum Filter Stainless Steel Flash Buffer Tank at 250ºF, Used 6 months before change in production requirements (Located in NC) ***FBEV***
Krones Contiform S-16 Cavity Rotary Blowmolder for PET Bottles Year: 2002 Model: S-16 S/N: 786-005, 16 Cavity Rotary Blowmolder, Linear Pre-Heat Tunnel, Includes M. Tanner AG Preform Orienter System with Bulk Hopper to feed preforms into blow molder – Model VZT-3000 with stainless steel dump hopper, feed rail with roller sorter, auto end kicker dumper. Blow molder includes Control Panel with Transformer, I-Panel HMI Touchscreen for Operator, Last ran 24000 Bottles/Hour on .5L PET Bottles with 26.7mm caps, Blowmolder will run up to 3L size bottle, Last ran 10oz. up to 1.5L (Located in NC) ***FBEV***
Sacmi 9 Station Rotary Pressure Sensitive Labeler Model: Opera 210 AD-9T Serial: M0089206 Year: 2009, Last running one gallon round and square PET Bottles with Body Front Pressure Sensitive Label, Infeed Timing Screw Machine, Operator Touchscreen Controls, Web Tracker, Speeds up to 100 Containers/Minute, Large Pitch Machine, 460 volts – 3 phase – 50/60 hertz, Left to Right Direction – Clockwise Rotation, Very Good Condition (Located in NC) ***FBEV***
Wulftec Semi-Automatic Pallet Stretch Wrapper Model: WSML-200 S Serial: 29017-1-0206 Year: 2006, Standard Machine, Clean Machine, Fully Operational, Last used in Food Plant, Floor Level Unit, 20 inch Film Carriage, 120 Volts (Located in NC) ***FBEV***
Bevco Lowerating Gripper Rinser Model: 610, Stainless Steel Construction, Uses Water to Clean Bottles Prior to Filling, “D” Style Soft Touch Gripper Bubbles with HP1873 Rexnord, Electrics – 460 Volts, 3PH, 60HZ, Good Condition, Last running PET Bottles up to 450+ BPM, In Operation till December 2016 (Located in NC) ***FBEV**
Lantech Q300 Pallet Stretch Wrapper Serial: 3378, Semi-Automatic, Rotating Turntable, Belts are in good condition, Powers on and will cycle (Located in NC) ***FBEV***
Sidel Aidlin Waterfall Cap Feeder Sorter Model: CF 20/24, Last running 30mm Plastic Caps at Hot Fill Juice Plant, Good Condition, Stainless Steel Construction, Uses pleated belts to feed/sort the caps to the shute down to the capper, Stainless Steel Control Panel with Allen Bradley VFD, Cap Blowers Included (Located in NC) ***FBEV***
PMI Tray Shrinkwrapper with Heat Tunnel Model: CSI-30TW Serial: 00397, Inline Tray Shrinkwrapper with Heat Tunnel, Clear Film Only, Approx. 30 inch wide Seal Bar Machine, 23″ wide belt, top and bottom film feed, wraps up to 15 trays per minute, 84 inch long heat tunnel, Support/Sales/Parts is provided by Arpac in Chicago, Plastic Matte Belt on Tunnel, 480 Volts, Temperature Controls for Seal Bar and Heat Tunnel (Located in NC) ***FBEV***
Harland Front and Back Pressure Sensitive Labeler Model: Sirius MK5 Serial: 31695-02 Year: 2003, Last running multiple sized non-round PET and HDPE Bottles for the Food/Sauce Industry, Variable Frequency Drive Controls, Allen Bradley Operator Touchscreen 550 Controls, Integrated 8′conveyor, Stainless steel Construction **Subject to Seller Confirmation** (Located in NC) ***FBEV***
Hamrick Drop Case Packer for PET or Glass Bottles Model: 360 Serial: 94-581, Includes Grid for 20oz. – 12 packs. Self-Aligning Stainless Steel Top Plate, 12 inch Adjustable Horizontal Case Lift, Pneumatic Container Agitator, Flight Bar Case Indexing, Power Case Discharge, Quick Lane Spacer, Lock Tab Tearing Device, Down Bottle Detection, Air Jet Flap Closer, In Operation until September 2015 at Bottled Water Plant (Located in NC) ***FBEV***
Lantech Automatic Pallet Stretch Wrapper Model: Q-Auto Serial: QA002610 Year: 2001, Automatic Pallet Wrapper with 5 Foot Infeed and 5 Foot Discharge Conveyors at 18″ Elevation, 460 Volts, 3PH, 60HZ, 80 PSI, 110″ Tall Mast, Safety Caging, Wraps up to 45-60 Loads per hour, Allen Bradley MicroLogix Controller, 20″ Roll Carriage, 200% Pre-Stretch, Max Pallet Weight 4000 Pounds *Wires have been cut from control panel to wrapper* (Located in NC) ***FBEV***
EQUIPMENT LOCATED IN MISSISSIPPI
SILOS, PROCESSORS, MIXING AND HOLDING TANKS
Mueller 3,000 Gal. S/S Silo, Model SVW, S/N D-20021-2 with Horizontal 3-Prop Agitator, Alcove, Painted Exterior, Jacketed, Dual Sprayball, Front Man Door, 150 psi, Silo Interior Dimensions Aprox. 118″ W x 84″ H (Located in Mississippi)***PPHARM***
2006 Walker 1,000 Gal. Dome-Top, Slopped Bottom S/S Mix Tank, Model Mix, S/N SPG-58903-2 with Bottom Sweep Agitator, Baffle and Dual Sprayball, MAWP 250 Degree F, Overall Height 112″ (Batch Mix Tank #5) (Located in Mississippi)***PPHARM***
2006 Walker 1,000 Gal. Dome-Top, Slopped Bottom S/S Mix Tank, Model Mix, S/N SPG-58903-1 with Bottom Sweep Agitator, Baffle and Dual Sprayball, MAWP 250 Degree F, Overall Height 112″ (Batch Mix Tank #4) (Located in Mississippi)***PPHARM***
Cherry Burrell 1,000 Gal. Dome-Top, Slopped Bottom S/S Mix Tank, S/N E513-90A-1 with Bottom Sweep Agitator, Dual Sprayball, Baffle and Bottom Jacket, Interior Dimension 59″ H x 71″ W, Overall Height 105″ (Located in Mississippi)***PPHARM***
Cherry Burrell 1,000 Gal. Dome-Top, Slopped Bottom S/S Mix Tank, S/N E513-90A-2 with Bottom Sweep Agitator, Dual Sprayball, Baffle and Bottom Jacket, Interior Dimension 59″ H x 71″ W, Overall Height 105″ (Batch/Mix Tank #1) (Located in Mississippi)***PPHARM***
Cherry Burrell 1,000 Gal. Dome-Top, Slopped Bottom S/S Mix Tank, S/N E513-90B-1 with Bottom Sweep Agitator, Dual Sprayball, Baffle and Bottom Jacket, Interior Dimension 59″ H x 71″ W, Overall Height 105″ (Batch/Mix Tank #2) (Located in Mississippi)***PPHARM***
Aprox. 500 Gal. S/S Vertical Single Wall Hinged Lid S/S CIP Tank, Aprox. Dimensions 60″ H x 50″ W (Located in Mississippi)***PPHARM***
Aprox. 450 Gal. S/S Vertical Single Wall Hinged Lid S/S CIP Tank, Aprox. Dimensions 60″ H x 48″ W (Located in Mississippi)***PPHARM***
Aprox. 130 Gal. S/S Hinged Lid Balance Tank, Interior Dimensions Aprox. 52″ W x 14″ Deep (Located in Mississippi)***PPHARM***
Aprox. 115 Gal. S/S Hinged Lid Balance Tank, Interior Dimensions Aprox. 42″ W x 19″ Deep (Located in Mississippi)***PPHARM***
Aprox. 90 Gal. S/S Hinged Lid Balance Tank, Interior Dimensions Aprox. 45″ W x 13″ Deep (Located in Mississippi)***PPHARM***
SEPARATORS & HTST SYSTEMS
Westfalia S/S CIP Separator/Centrifuge, Model MSA170-01-076, S/N 1669-123 includes S/S Balance Tank with Controls, Valves, Filters and Some Tools (Located in Mississippi)***PPHARM***
REFRIGERATION & PLANT SUPPORT
Phoenix Air Handling System, Model PH-120B95A, S/N 0310/05-601-0 with Allen Bradley MicroLogix 1200 PLC and Honeywell Burner Control, 230 V, 3 Phase, 12,000 CFM, Overall Dimensions Aprox. 80″ H x 9 ft. W x 24 ft. 5″ L (Located in Mississippi)***PPHARM***
2005 Carrier/Tyler Package Freon Chiller System, Model P140M-33, WO #385166-1 with (6) Copeland Discus Compressors, Model 3DA3A060L-TFD-204, S/N ET05A00569R; (3) Model 3DB3A075L-TFD-204, S/N ET05C01678R, S/N ET05C01677R, S/N ET05C01677R; Model 2DC3-050L-TFD-204, S/N ET04D36342; (2) Model 2DL3-075L-TFD-204, S/N ET05C01775R and S/N ET05C01774R with R507 Refrigerant, CPC Computer Process Controls and Intelligent Choice In Energy Control, 460 V, 3 Phase, Overall Dimensions Aprox. 18 ft. L x 86″ H x 6 ft. W (Located in Mississippi)***PPHARM***
Recold Cooling Tower, Model JC-38, S/N 05419, Overall Dimensions Aprox. 10 ft. L x 80″ H x 5 ft. W (Located in Mississippi)***PPHARM***
Schreiber Self-Contained Package Chiller, Model 500AC, S/N 5688, 460 V, 3 Phase (Located in Mississippi)***PPHARM***
1995 Frick ___ hp Rotary Screw Ammonia Compressor, Frame Model #RWB1160, S/N S0390PFMPL11AA2, Head Model/S/N TDSH163S1543A with R717/R22 Refrigerant, 3600/4500 RPM, MADP 300 psig and 350 psig with RWBII Plus Digital Touchpad Display (Located in Mississippi)***PPHARM***
Vilter 75 hp 4 Cylinder Ammonia Reciprocating Compressor, 1775 RPM, 460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 50 hp 4 Cylinder Ammonia Reciprocating Compressor, 1765 RPM, 230/460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 50 hp 4 Cylinder Ammonia Reciprocating Compressor, Type VMC450XL, Size A88K454LB, S/N 65837, Order #H-86447, 1775 RPM, 230/460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 75 hp 4 Cylinder Ammonia Reciprocating Compressor, Type VMC450XL, Size AK454XLB, S/N 66247, Order #K-15885, 1775 RPM, 230/460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 60 hp 4 Cylinder Ammonia Reciprocating Compressor, Size A88K45, S/N 30575, Order #F-14206-1, 1770 RPM, 230/460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 20 hp 2 Cylinder Ammonia Reciprocating Compressor, Size 442, S/N 10531, Order #AC35077, 1160 RPM, 230/460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 100 hp 6 Cylinder Ammonia Reciprocating Compressor, Size A10K456B, S/N 60181, Order #F14997-1, 1770 RPM, 460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 100 hp 8 Cylinder Ammonia Reciprocating Compressor, Size M88K448B, S/N 20742, Order #D-75288-3, 1770 RPM, 230-460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 100 hp 8 Cylinder Ammonia Reciprocating Compressor, Size M88K448B, S/N 20741, Order #D-75288-2, 1775 RPM, 230-460 V, 3 Phase (Located in Mississippi)***PPHARM***
Vilter 16-Cylinder Ammonia Reciprocating Compressor (Parts Only) (Located in Mississippi)***PPHARM***
1997 Krack 5-Fan Evaporator Ammonia Blower, Model DTX5S-1270-DXA-HGC-RH, S/N 485540-01A, R717 Refrigerant (Unit #7) (Located in Mississippi)***PPHARM***
2000 Krack 4-Fan Evaporator Ammonia Blower, Model DTX4S-1360-DXA-HGC-5, S/N 541242-10D, R717 Refrigerant (Located in Mississippi)***PPHARM***
EQUIPMENT LOCATED IN MASSACHUSETTS
De Laval Model MRPX-314 TGV-74C All S/S CIP Separator, s/n 2922820, w/Starter, Control Panel, & Micrometer Type Back Pressure Valve. Used for Milk Separation, Capacity 33,000 to 50,000 Lbs/Hr. (Located in MA)***DAHL***
EQUIPMENT LOCATED IN THE UNITED KINGDOM
Filmatic HDPE & PET Bottle Filler, 32-Head Filler with 8-Head Screw Capper, Previously Running 1 Liter Bottles of Milk @ 180 BPM, 38 mm Caps, CIP Ring, Change Parts for 1 & 2 Liter Square Bottles, Safety Stops and Emergency Stops on Doors, Fully Enclosed, Cap Hopper and Blower Unit, Dawson Polyketting Bottle Lowerator / Inverter, Infeed and Outfeed Bottle Conveyor (Located in the United Kingdom)***DMUK***
Equipment Located in Pittsburgh
2013 Domino Portable Print and Apply Labeler, Main Body Type A2220/B-C360-150/110NS-R, S/N 7525, Controller Type PCU IV-B4, S/N C12J0203907 (Like New) (Located in Pittsburgh)***NYINC***
New Jersey Inline Labeler, Model 326VLWCBP-5132, S/N M03C0023 with 4-1/2” W Plastic Belt Mounted on 13 ft. L Conveyor, Allen Bradley Ultra 5000 Servo Drive, 110 V, Single Phase with Parker CTC 326 AutoColt III Touchpad Display including Visionscape I-Pak RVSI Acuity CiMatrix Display (Located in Pittsburgh)***NYINC***
