Evaporation and UF Facility

Featured Auction

AUCTION | ONLINE ONLY | DATE: JANUARY 16th, 2017 – January 25th, 2017
LOCATION: 615 Burnett Rd, Tipton, CA 93272

Assets formerly of Lactalis. Major updates in 2009

2009 COMPLETE HTST

2009 Alfa Laval Aprox. 2,000 Gal per Hour Milk HTST System, with Press Model FRONT6-FRB, S/N 30111-97956, Includes (3) Dividers, (130) Pro Series Plates, Tri Clover Flow Diversion Valve, Aprox. 25 Gallon S/S Balance Tank, 5 pass 120” S/S Holding Tube, (2) Aprox. 3 ft. L S/S Shell & Tube Heat Exchanger, (3) Fristam 5 hp Centrifugal Pumps, Related Piping, Valves & Allen Bradley PLC Controls

Fristam Positive Displacement Timing Pump, Model FL2-130L

Installed in 2009!

Westfalia CIP Separator / Centrifuge, Model MSA200-47-076, S/N 1672105, Includes Related Valves & Sensors, PLC Controls & Service Tooling (Installed in 2009)

Like New Cream System

Alfa Laval S/S Plate Press, Model CLIP 6 RM, Includes (1) Divider, (70) Pro Series S/S Plates, G&H Positive Displacement Cream Pump with 1 HP Drive Motor; Aprox. 20 Gal. S/S Balance Tank; Tri Clover 5 HP Centrifugal Pump; Related Valves & Piping

COMPLETE UF SKID MAJOR UPGRADES IN 2009

Filtration Engineering Skid Mounted UF System, (1) Rack with (7) Upgraded “2009” Aprox. 10 ft L by 8” S/S Tubes (Drawing #2835-4607) & (1) Rack with (18) Aprox. 10 ft Long by 4” S/S Tubes, Includes Fristam Centrifugal Pumps with (1) 50 hp, (1) 25 hp, (2) 10 hp, (2) 5 hp, (1) 15 hp, (3) S/S Tanks Including 250 Gal, 100 Gal, & 50 Gal for Renteate, Permeate & CIP, Associated S/S Air Valves, Check Valves, Flow Meters, Sensors & Controls with Allen Bradley PLC

NEW IN 2007

FALLING FILM MVR EVAPORATOR

2007 Acqua Int. Falling Film “Cyclovap Tech” S/S MVR Evaporator, Model CYCLOVAP, (Designed for 26,000 lbs / 12,056 kg per hr. on Whey – 53 GPM @ 5.5 percent solids & concentrate it up to 28 percent high solids), Steam Heated, Utilized ISG (Inline Swirl Generation) Technology, Aprox. 86 ft Dia. Main Chamber (Calandria) with 675 2” & 8” Tubes x Aprox. 36 ft. H x 8 ft. Wide, with Pillar 277 hp / 177.3 kw Turbo Compressor / Turbo Fan, Type 40778 KKXGAE 80560, with VFD Controls, Includes S/S Duct Work, (7) Fristam & Other Centrifugal Pumps up to 25hp, Related APV & Other Valves, PSI, Mag & Mass Flow Sensor Transmitters, Temp & Conductivity Sensors, Related Piping & Fittings & PLC Controls, (Note: Full Specs Available upon Request)

(2) S/S Plate Heat Exchanger / Preheater

S/S Recirculation Tanks

S/S CIP System

Evapco Cooling Tower

CRYSTALIZER AND OTHER SILOS

SILOS

(4) 25,000 Gal. Insulated S/S Silos, with Horizontal Agitators, Sprayballs, Level Sensors & Valves

(2) DCI 5,000 Gal. S/S Jacketed Crystallizer / Silos, S/N 98-D-57358-A & B, with Vertical Agitators, Dual Sprayballs, Level Sensors & Valves

BATCH PROCESSORS

APV / Crepaco 2,000 Gal. Dome Top S/S Processor, S/N 8778, with Bottom Side Sweep Agitator, Baffle, Dual Sprayball, S/S Bottom & Valve, (Skim Tank)

Cherry Burrell / WCB 1,000 Gal. Dome Top S/S Processor, S/N 1000-66-1383, with Bottom Side Sweep Agitator, Baffle, Dual Sprayball, S/S Bottom, WCB Air Valve & Level Sensor, (Cream Tank)

APV / Crepaco 1,000 Gal. Dome Top S/S Processor, S/N 20217, with Bottom Side Sweep Agitator, Baffle, Dual Sprayball, S/S Bottom, WCB Air Valve & Level Sensor, (Cream Tank)

(10) ADDITIONAL STAINLESS TANKS

Aprox. 3,000 Gal Rectangular Jacketed S/S Tank with Horizontal Agitator, Sprayball & Valve

(2) Aprox. 2,000 Gal. Single Shell S/S Mix Tanks with Vertical Agitator

(4) Aprox. 2,000 Gal. Single Shell S/S Tanks

Aprox. 250 Gallon Dome Top, Dome Bottom, Single Shell S/S Tank

Aprox. 6,500 Horizontal Jacketed Tank

CIP SYSTEMS

Sani Matic Skid Mounted S/S CIP System, with (3) Aprox. 750 Gal. S/S Tanks, Centrifugal Pumps, Shell & Tube Heat Exchanger, Related Valves & Piping, Chemical Handling System, Allen Bradley PLC Controls, (CIP #1)

Skid Mounted S/S CIP System, with (3) Aprox. 500 Gal. S/S Tanks, Centrifugal Pumps, Shell & Tube Heat Exchanger, Related Valves & Piping, Chemical Handling System, Allen Bradley PLC Controls, (CIP #2)

ADDITIONAL PROCESSING EQUIPMENT

Plate Presses – 2011 AGC S/S Plate Press, Model PRO3-SH, S/N 2011317, 250 Degree F, 200 psi Max, Additional plate press photo and descriptions to come

S/S Piping – Installed S/S Piping Throughout Facility Including Floverter Stations & Related Fittings

S/S Valves – (30) S/S Mix Proof Valves

S/S Pumps – Over (10) Tri Clover 3 & 5 hp Tri Clover Centrifugal Pumps

Flow Meters – (4) Micro Motion Flow Meters

Additional S/S Tanks – (2) Aprox. 40 Gal. S/S Balance Tanks; 500 Gal. S/S Single Shell Storage Tank