LATE ADDITIONS! (2) SINGLE TANK SKID-MOUNTED CIPS

Sani-Matic Skid Mounted S/S CIP System, Job #40737, Item # 01-200661, with 200 Gal. S/S Tank, 2011 Enerquip S/S Shell & Tube Heat Exchanger BN 10486, SN 12784, MAWP 150 psig @ 375 degree F, Fristam 10 hp S/S Centrifugal Pump, Endross Hauser 2″ Flow Meter with Read-Out, Inline Filter, Gea, WCB & Sudmo Air Valves, Check Valves, Temp Sensors, Gauges, S/S Enclosure with Allen Bradley Flex IO Controls, Foxboro Conductivity Meter, Solenoids & Breakers Mounted in S/S Enclosure, (CIP Dim. 9 ft L x 4 ft W x 85″ H), Skid Dim. 10 ft L x 90″ W x 90″ H)

Sani-Matic Skid Mounted S/S CIP System with 80 Gal. Insulated S/S Tank, 2010 Enerquip S/S Shell & Tube Heat Exchanger BN 9748, SN 12108, MAWP 150 psi @ 375 degree F, Fristam 10 hp Centrifugal S/S Pump, Inline Filter, Sudmo Air Valves, Check Valves, Temp Sensors, Gauges, S/S Expansion Tanks, S/S Enclosure with Foxboro Conductivity Meter, (CIP Dim. 100″ L x 4 ft W x 103″ H), Skid Dim. 10 ft L x 90″ W x 9 ft H)

TANKS & PROCESSORS

Girton 1,500 Gal. Dome Top S/S Processor, Model PW-P-1500, S/N 72090504 with Bottom Sweep Agitator with 2 hp / 1725 RPM, Dual Sprayball, Baffle, Top Mounted Man Door, S/S Bottom, WP 100 psi Jacket, 208/230/480V 3 Phase, (Aprox. Overall Diam. 128″ H x 88″ W)

Girton 1,500 Gal. Dome Top S/S Processor, S/N 72090505 with Bottom Sweep Agitator with 1 hp / 3/4 hp / 1225/1125 RPM, Dual Sprayball, Baffle, Top Mounted Man Door, S/S Bottom, WP 100 psi Jacket, 208/230/480V 3 Phase, (Aprox. Overall Diam. 125″ H x 88″ W)

Girton 1,500 Gal. Dome Top S/S Processor, Model PW-P-1500, S/N 69110613 with Bottom Sweep Agitator with 1.5 hp / 3/4 hp / 1220/600 RPM, Dual Sprayball, Baffle, Top Mounted Man Door, S/S Bottom, 230V 3 Phase, (Aprox. Overall Diam. 135″ H x 88″ W)

Cherry Burrell 2,200 Gal. Dome Top S/S Processor, S/N E-397-89, with Bottom & Side Sweep Agitator with 5 hp / 3485 RPM, Dual Sprayball, Baffle, Top Mounted Man Door, S/S Bottom, 230/460V 3 Phase, (Aprox. Overall Diam. 170″ H x 88″ W)

V BLENDERS & CONE & CONE BLENDERS

Pattersen Kelley 40 cu.ft. S/S V Blender, S/N 11021, Max Material Density 55 lb / cu. Ft, with 5 hp, 1725 RPM, 208/230V 1 Phase with Square D Controls, Mounted on Steel Frame

Pattersen Kelley 40 cu.ft. S/S V Blender, S/N C007450, Max Material Density 65 lb / cu.ft. with Aprox. 3 hp, 1750 RPM, 480V 3 Phase, with Square D Controls, Mounted on Steel Frame

Patterson-Kelley Type 48″ W x 54″ L Double Cone S/S Blender with 18″ Infeed Port with Locking Cover, 8″ Bottom Outlet with Butterfly Valve, 5 hp / 1725 RPM Motor, Mounted on Steel Frame

PLATE FRAME HEAT EXCHANGERS 

2012 HRS Skid Mounted S/S Plate Heat Exchanger, Model FP 10 – 47 – 1 – EH, S/N P12296-P0405 with On-Board Temp Controls, 2″ Connections with Ball Valves & Control Valve

AGC 38″ H S/S Plate Press, Model PRO2-F, S/N 2013122 with (46) S/S Plates, 2-1/2″ Clamp Type Connections with Gauges, 250 Degree Max. Temp, 150 Max. psi includes S/S Stand

2005 AGC S/S Cream Plate Press, Model PRO2-SH, S/N 0525, Max. Temp. 250 Degree F, Max. Pressure 150 psi with (97) Plates includes Pallet of S/S Pipe Connectors, Temperature Sensors and Gauges

Cherry Burrell ThermaFlex S/S Plate Heat Exchanger, Model 655-CBH, S/N 95156XA with (26) S/S Plates, 150 psig, Total Dimensions Aprox. 56″ L x 35″ W

SEPERATOR

Tetra/Alfa Laval Separator/Centrifuge, Model 214 with 20 hp Motor, 1750 RPM, 230/460 V, 3 Phase, Control Panels, (2) Metering Valves, Pressure Gauges, Spare Clutch including Separator Tooling

PUMPS

Waukesha 10 hp Centrifugal Pump, Model C218, S/N 345976-03, with 3″ x 1 1/2″ CT All S/S Head and Baldor 1760 RPM Motor, 203/230/460V 3 Phase

Tri-Clover 3 hp Centrifugal Pump, Model C218 with 2″ x 1 1/2″ Clamp Type S/S Head and Reliance 1730 RPM Motor, 230/460V 3 Phase

Tri-Clover 3 hp Centrifugal Pump, Model C218 with 2″ x 1 1/2″ Clamp Type S/S Head and Baldor 1760 RPM Motor, 208/230/460V 3 Phase

Tri-Clover 2 hp Centrifugal Pump, Model C114 with 2″ x 1 1/2″ Clamp Type S/S Head and 3450 RPM Motor, 230/460V 3 Phase

Tri-Clover PR60 Positive Displacement Pump, Includes Pump Rotors with 3″ CT Head, Baldor 3 hp / 1760 RPM Drive Motor, 208/230/460V 3 Phase

APV R4TS Positive Displacement Pump, S/N R-6594-0897 with 2″ Threaded S/S Head, Includes Pump Rotors, Sterling 5 hp / 1710 RPM Drive Motor, 230/460V 3 Phase, Mounted on S/S Frame

Waukesha 130 Positive Displacement Pump, S/N 411178 06 with 3″ Threaded S/S Head and Baldor All S/S Clad 3 hp / 1760 RPM Drive Motor, 230/460V 3 Phase, Mounted on S/S Frame ( Note: Does Not Include Pump Rotors)

Waukesha Size 100 Positive Displacement Pump, S/N DO 4928, with 3″ Threaded S/S Head, Siemens 3 hp / 1735 RPM Drive Motor, 230/460V 3 Phase

Sine Positive Displacement Pump, Model MR130NNTC, S/N 95710161 with Pump Rotor, 3″ Clamp Type S/S Head and Reliance 2 hp /1725 RPM Drive Motor, 230/460V 3 Phase, Mounted Electrical Box with AB Powerflex 4M VFD, Mounted on S/S Frame with Casters

FLOW METERS

(5) Endress Hauser 2″ Clamp Type In-Line S/S Flow Meters, Models Promag 50, with Digital Read-Outs

Endress Hauser 2″ Clamp Type In-Line S/S Flow Meter, Model Promag 53, S/N D6032216000 with Digital Read-Out

Endress Hauser 2″ Clamp Type In-Line S/S Flow Meter, Model Promag H, S/N CB00A316000

Anderson 2″ Clamp Type In-Line S/S Flow Meter, Model IZMAG032D000S0000, /N 1045788 with Digital Read-Out

(2) Anderson 2″ Clamp Type A3 Positive Displacement S/S Flow Meter Body, No. 30.25 PG

Accurate 2″ CT S/S Flow Meter Bodies, Model IZMS-80 & IZM-50, S/N 25956 D9 & S/N 3003 32 with Read Out

AIR VALVES & AIR VALVE CLUSTERS

(14) Air Valve Manifolds/Clusters with 4-35 Air Valves Each, 2″-2.5″ Clamp Types

Hundreds of Additional Air Valves