Food and Fluid Processing and Packaging Equipment Consignment Auction

SILOS, TANKS & PROCESSORS

Dairy Craft 6,000 Gallon Stainless Vertical Silo with Agitator Serial: 77J3387, Stainless Steel Construction, Double Insulated and Refrigerated, Top Mounted Agitator, Side Alcove with Manhole, Last used in a Beverage Plant, Last ran Orange Juice Concentrate, Refrigeration only held temperature – did not chill the product(Located in North Carolina) ***FBEV***

SFI 3,000 Gallon Insulated  Storage Tank S/N: 4378-5, Made by Sanitary Fabricators, Insulated Fermentation Tanks, Last used in Yogurt Plant, Multiple Inlets on Top of Tank, Cone Bottom with S/S legs, Top Manway opening of 18in, Projectile Well for RTD and Thermometer, #4 Finish, CIP Spray ball, 3in Chloride and Asbestos Free Fiberglass Insulation, 108in Diameter x 156in Height(Located in North Carolina) ***FBEV***

Mueller 800 Gallon Stainless Steel Jacketed Processing Tank S/N: F39026-2, Jacketed Processor, last used in food production plant, Dish Head, Dish Bottom, 90 PSI, 250 Deg F, Vertical Agitator, 55in Diameter x 127in Height, CIP Spray ball(Located in North Carolina) ***FBEV***

Groen 600 Gallon Jacketed Kettle Serial: 00278-2, Last Used in Food Processing Plant, Stainless Steel Construction, Max Working Pressure 125 at 353 Degrees F **No Agitator or Mixer Included**(Located in North Carolina) ***FBEV***

500 Gallon Jacketed Processor Tank, Dish Head, Dish Bottom, Top Agitation, 75 inch Diameter x 105 inch Tall, Bottom Discharge, Top Manhole (Located in North Carolina) ***FBEV***

Groen 500 Gallon Jacketed Serial: 03077-1, Last used in Food Processing Plant, Stainless Steel Construction, MAWP 100 PSI at 300 Degress F **No Agitator or Mixer included**(Located in North Carolina) ***FBEV***

Groen 500 Gallon Non Jacketed Serial: 03076-1 Year: 1995, Last used in Food Processing Plant, Stainless Steel Construction **No Agitator or Mixer Included**(Located in North Carolina) ***FBEV***

DCI 350 Gallon Insulated Kettle with Admix Top Agitator Serial: 92F43901, National Board Number 1906, Includes Admix High Shear Mixer, Second Top Mounted Side Swept Agitator, Load Cells(Located in North Carolina) ***FBEV***

Chester Jenson 300 Gallon Kettles Serial: 9328-P, **Jacket Doesn’t Hold Pressure** 316 Stainless Steel Construction, Double Motion Agitator, 3HP Motor, Last used for sauces at food plant (Located in North Carolina) ***FBEV***

Chester Jenson 300 Gallon Kettles Serial: 9329-P, **Jacket Doesn’t Hold Pressure** 316 Stainless Steel Construction, Double Motion Agitator, 3HP Motor, Last used for sauces at food plant (Located in North Carolina) ***FBEV***

200 Gallon Batch Blending Tank, Stainless Steel, Single Agitation, Baldor 2HP 208-230/460 Volt 60 Hz 3 Phase, Mounted to a Stainless Steel Frame, Includes Tri-Clover Centrifugal Pump Model: C216MF18T-S Serial: P0874  (Located in North Carolina) ***FBEV***

200 Gallon Stainless Steel Jacketed Tank with Top Mixer, Top Manhole, High Shear Mixer Blade, Baldor 2 HP Motor 208/230/460 Volt, Mounted on SS Legs(Located in North Carolina) ***FBEV***

PASTEURIZERS & PLATE HEAT EXCHANGERS

Skid Mounted HTST Pasteurization System for Hot Fill, Setup for Juice at 25 gallons per minute at 200F, 460 Volt 3 Phase 60Hz, Water 40 PSIG, Air 80 PSIG, Steam PSIG, Includes APV Multi-section Plate Heat Exchanger for Heating-Cooling-Regeneration, Holding Tube for Pasteurization, Control and Steam Valves, Fristam High Pressure Pumps, Anderson Chart Recorder, (2) Stainless Steel Buffer Tanks, Last in operation November 2017 (Located in North Carolina) ***FBEV***

Barry-Wehmiller Flash Pasteurization Skid Serial 61180 Year: 2011, Setup for Juice or Lightly Carbonated Cider, 100 Gallons/Minute, Incoming Product Temperature 65ºF minimum – incoming product temperature max is 85ºF, Target Hold Time 15 seconds, 460 Volts, 3PH, 60HZ, Water 40 PSIG, Air 80 PSIG, Steam PSIG, Includes APV Multi-Section Plate Heat Exchanger – Model R5 R-15, 150 PSIG at 293ºF Max Temperature, Holding Tube for Pasteurization, Control and Steam Valves, Stainless Steel Construction, Fristam High Pressure Pumps, Allen Bradley Control Logix PLC with PowerFlex Frequency Drives and Operator Panelview 1000 Touchscreen, Optimum Filter Stainless Steel Flash Buffer Tank at 250ºF, Used 6 months before change in production requirements(Located in North Carolina) ***FBEV***

Alfa Laval Clip 10 Plate Heat Exchanger Model: Clip 10 RM Serial: 30105-51865, Stainless Steel Plates, Can be used to heat/chill product, Max Working Pressure – 145PSI, Max working temperature – 230ºF, Good Condition, Last used in Food Plant(Located in North Carolina) ***FBEV***

FILLERS

MRM 4 Head Rotary Piston Filler Serial: RPF04263, Stainless Steel Construction, Control Panel, Last setup running 16oz. mason jars of Salsa, Good Condition, Adjustable Height, 230 Volts 3PH 60HZ, Left to Right Design Flow (Clockwise), Max up to 60 Containers/Minute, Max Container Size up to 9 inches diameter, Accuracy ± 0.5%, Fill Volume 0.5oz to 153oz (Located in North Carolina) ***FBEV***

Pfaudler 10 Head Rotary Piston Filler Model: RP610 Serial: R5760240, Stainless Steel Product Contact Parts, Mild Steel Frame, 10 Head Rotary Machine, Last setup running 16oz. mason jars of Salad Dressing, Good Condition, Adjustable Height, 460 Volts 3PH 60HZ, Left to Right Design Flow (Clockwise), Max up to 200 Containers/Minute, In Production up to November 2017 (Located in North Carolina) ***FBEV***

Filler Specialties Filler, Model # GWFS248R, S/N 18695, 24-valve filler / 8-head capper / 7-7/8″ pitch(Located in South Carolina) ***NSP***

Case & Tray Handling, Forming & Packaging

PMI Tray Shrinkwrapper with Heat Tunnel Model: CSI-30TW Serial: 00397, Inline Tray Shrinkwrapper with Heat Tunnel, Clear Film Only, Approx. 30 inch wide Seal Bar Machine, 23″ wide belt, top and bottom film feed, wraps up to 15 trays per minute, 84 inch long heat tunnel, Support/Sales/Parts is provided by Arpac in Chicago, Plastic Matte Belt on Tunnel, 480 Volts, Temperature Controls for Seal Bar and Heat Tunnel(Located in North Carolina) ***FBEV***

Kisters KHS SP040 Shrink Wrapper Bundler Serial: 2443 Year: 2003, Uses Film Only – NO Tray, Last packing 6 pack and 12 pack juice bottles with print registered film, Allen Bradley controls with Panelview 600 Touch Screen, 40ft total length, Speeds up to 40 cases per minute(Located in North Carolina) ***FBEV***

Arpac 25TW-28 Tray Shrink Wrapper and Heat Tunnel Model: 25TW-28 Serial: 3764, Last used for bottles in trays and cans in boxes, 28 inch wide 12 inch tall seal bar, Runs up to 20 packages per minute, 34 inch infeed/discharge elevation, Left hand machine, Allen Bradley SLC 5/03 PLC with Allen Bradley 160 VFD Drive, 460 Volts 3 Phase 60Hz, Central Point Lubrication, 80 PSI air minimum, Turbo Cooling(Located in North Carolina) ***FBEV***

Douglas Tray Shrink Wrapper Bundler for Loose Product Model: SR7-1224 Multi Wrap S/N: M-4153, Uses Film Only – No Tray, Last packing 6 packs and 12 packs water bottles from 12oz to 1L with print registered film, Allen Bradley SLC 5/04 Controls, 40 ft. Total Length, Speeds up to 70 cycles/minute, Can run single or dual lane, Inline Infeed with Servo Pin Metering and overhead sweep, Infeed/Discharge height – 54 inches, Side Film Stand, Powder Coated, Full Lexan Machine Guards, 480 Voltage, Used about 10 years in service at small water bottling plant – 20 hours per week(Located in North Carolina) ***FBEV***

Wexxar Automatic Glue Case Erector Model: WFH Serial: 1355, Runs around 15 cases per minute, Removed from production June 2017, Includes ITW Dynatec Glue System (Located in North Carolina) ***FBEV***

Wexxar Automatic Top Glue Case Sealer Model: WSH-06 Serial: 1357, Runs around 15 cases per minute, Removed from production June 2017, Includes ITW Dynatec Glue System (Located in North Carolina) ***FBEV***

ABC Automatic Top Case Sealer with Nordson Glue Model: 336 Serial: 23318, Last running at distribution plant – little use, Stainless Steel Constuction, Last closing RSC Cases up to 30 cases per minute, Small Footprint, Nordson ProBlue 10 Glue Unit (Located in North Carolina) ***FBEV***

SWF Tray Former Model: TF600VK Serial: 6635, Nordson Glue System, Quick Change Machine, Compact Design, Vacuum Assist for Trays, Speeds up to 30 trays/minute, 9″ min. to 23″ max for length, 11 3/4″ min. to 38″ max for width, 2″ min. to 10″ max for height of erected trays, Good Condition, Last in Production June 2017, 220 Volts 3PH 60HZ (Located in North Carolina) ***FBEV***

Arpac Shrink Bundler, Model # 1058-50, S/N 2799, right angle infeed with 50″ wide film capability / AB PLC(Located in South Carolina) ***NSP***

Arpac Shrink Bundler, Model # 106-16, S/N 3442, small carton accumulator / stacker into film shrink wrapper / AB PLC(Located in South Carolina) ***NSP***

Arpac Shrink Bundler, Model # 1058-24, S/N 1396, stainless steel / last running round cartons of ice cream in clear film(Located in South Carolina) ***NSP***

Bradman Lake Tray Former, Model # XS2-60, S/N 15093, dual forming heads for self-locking style trays(Located in South Carolina) ***NSP**

Combi Case Erector / Packer / Sealer System, Model # SPP, S/N 110146694, case erector / servo-driven pouch-packer / flap taper with 2″ 3M applicator(Located in South Carolina) ***NSP***

Pearson Case Erector, Model # R235-T, S/N 2359358, bottom flap taper with 2″ 3M tape head / AB PLC (very good condition)(Located in South Carolina) ***NSP***

Wexxar Tray Former, Model # ATL, SN 2503, servo-driven mandrel / quick-change / last running 24-can packs of beer / AB PLC(Located in South Carolina) ***NSP***

Delkor Tray Former, Model # 751, S/N 728, single forming head with Nordson hot melt glue (needs work)(Located in South Carolina) ***NSP***

Doboy Bosch Tray Former, Model # 7510, S/N 98-20203, single forming head for self-locking style trays (converted from hot melt)(Located in South Carolina) ***NSP***

Douglas Shrink Wrapper, Model # SR4-724, S/N M-4813, registered film shrink wrapper and tunnel for trays of bottles or cans / AB PLC(Located in South Carolina) ***NSP***

Econocorp Tray Former, Model # 8417, S/N 8581-1, single forming head with Nordson hot melt glue / AB PLC(Located in South Carolina) ***NSP***

Elliott Case Sealer, Model # 85-AT, S/N 93-12-20, automatic top & bottom case taper with index gate (2″ top tape head only)(Located in South Carolina) ***NSP***

Elliott Case Sealer, Model # 85-AT, S/N 93-12-21, automatic top & bottom case taper with index gate (2″ top tape head only)(Located in South Carolina) ***NSP***

Hartness Drop Packer, Model # 850-D, S/N 8D-027, stainless steel unit with single- or dual-head drop grid ability / AB PLC(Located in South Carolina) ***NSP***

Hartness Drop Packer, Model # 900-AT, S/N 9-074, high-speed laner / servo drive / AB PLC / last used on small cosmetic cartons(Located in South Carolina) ***NSP***

Hartness Drop Packer, Model # 2800, S/N 28-190, stainless steel unit with servo drive / AB PLC / last used on round glass jars(Located in South Carolina) ***NSP***

Hartness Tray Former, Model # TF-50, S/N 16-051, single forming head for corrugated trays / Nordson hot melt glue / AB PLC(Located in South Carolina) ***NSP***

Hartness Case Sealer, Model # CTS-30, S/N 17-205, automatic top case sealer with Nordson hot melt glue / AB PLC(Located in South Carolina) ***NSP***

Southern (SPMC) Case Erector, Model # CE-900-STD, S/N 5819, Nordson hot melt glue / AB PLC(Located in South Carolina) ***NSP***

KlikLok Tray Former, Model # SR4S, S/N 451, single forming head for self-locking style trays / stainless steel(Located in South Carolina) ***NSP***

KlikLok Tray Former, Model # JR, S/N JR-641, single forming head for self-locking style trays / no forming mandrel assembly(Located in South Carolina) ***NSP***

Loveshaw Case Erector, Model # CF-40T, S/N 22054640T, bottom flap taper with 2″ applicator / AB PLC(Located in South Carolina) ***NSP***

Loveshaw Case Erector, Model # CF-151, S/N 3590, older case erector with Nordson hot melt glue (needs rebuild)(Located in South Carolina) ***NSP***

Loveshaw Case Sealer, Model # LD-16, S/N 478254800, automatic top & bottom case taper with 2″ applicators / powered top squeezers option for tall cases(Located in South Carolina) ***NSP***

Loveshaw Print & Apply Labeler, Model # LS800-DT, S/N 8RDTH04XX115, Zebra print head / Hytrol conveyor and stand (included)(Located in South Carolina) ***NSP***

Marq Packaging Case Erector, Model # HPE-NS, S/N Q07005, flap taper with 2″ or 3″ 3M applicator / medium frame option for larger case sizes/ DL06 PLC(Located in South Carolina) ***NSP***

MGS Tray Former, Model # CFG-250, S/N 4604, dual forming heads with Nordson hot melt glue / last running corrugated food trays(Located in South Carolina) ***NSP***

Moen Bliss Box Former, Model # PF106-HLV, S/N 1430, erector for H-bliss style trays / hot melt glue (Located in Pennsylvania)***NSP***

Nigrelli Tray Former, Model # CMTF-100, S/N TF99 -1838-3, very high speed with Nordson ProBlue10 hot melt glue / AB PLC(Located in South Carolina) ***NSP***

PakTek Case Packer, Model # PTC-G1, S/N 205H6-S, stainless steel unit with lowering head packer/ AB PLC / last running 4 x 1-gallon bottles(Located in South Carolina) ***NSP***

Padlocker Tray Former, Model # TF6-A-BSF, S/N 4031, Nordson hot melt glue with pattern controller(Located in South Carolina) ***NSP***

PMS Tray Former, Model # GF60D, S/N 551, dual forming heads with dauber-style hot melt glue closure(Located in South Carolina) ***NSP***

AE Randles Tray Former, Model # 16-26, S/N VF-3399, single forming head for self-locking style trays(Located in South Carolina) ***NSP***

AE Randles Tray Former, Model # 22-44, S/N VF-6013, single forming head for self-locking style trays(Located in South Carolina) ***NSP***

SECO Drop Packer, Model # DP50, S/N P2552, last used to drop large plastic bottles of juice into case in 2 x 3 pattern (Located in Pennsylvania)***NSP***

Wepackit Case Erector, Model # 720 XLM, S/N 2556, bottom flap taper with 2″ Interpack tape head / AB PLC(Located in South Carolina) ***NSP***

Southern Tray Former, Model # TE700-VF, S/N 5531, small frame / for beverage trays / Nordson hot melt glue (needs some work) (Located in South Carolina) ***NSP***

Southern Tray Former, Model # TE700-VF, S/N 6244, full frame / Nordson hot melt glue (very good condition) (Located in South Carolina) ***NSP***

Sprinter Tray Former, Model # MP11, S/N 32364, single forming head for self-sealing trays(Located in South Carolina) ***NSP***

SWF Tray Former, Model # TF400V, S/N 6407, hot melt glue closure with large glue pots(Located in South Carolina) ***NSP***

SWF Case Erector, Model # CF-151 RH, S/N 5994883, extended 6′ hopper, Nordson hot melt glue / AB PLC(Located in South Carolina) ***NSP***