(3) Laack Cold Storage Facilities in WI

Featured Auction

 

ONLINE AUCTION  | (3) Auction Dates are TBD
LOCATIONS

504 Barnes Ave, Waupun, WI 53963

356 Dixie Street, Fond Du Lac, WI, 54935;

6375 County Road N, Arpin, WI, 54410 

WAUPUN LOCATION

7,000 LB. Ammonia Refrigeration – Low Temp -0 Degree to -10 Degree


FES 250 hp Ammonia Screw Compressor, Head Model/S/N 19M260V with FES Micro II E Touchpad Controls, 3550 RPM, 460 V, 3 Phase, Solcon RVSDXM Soft Starter in Benshaw Control Box, 39,045 Hrs. (Compressor #3) (Located in Waupun, WI)

FES 200 hp Ammonia Screw Compressor, Kobelco Head Model 16LGB, S/N R1-16L089311M, Frame Board #8311, S/N 950718 with FES Micro Master Touchpad Controls, 2970 RPM/3565 RPM, 460 V, 3 Phase, ABB Starter and Toshiba VF-AS1 VFD, 29,404 Hrs. (Compressor #1) (Located in Waupun, WI)

FES 75 hp Ammonia Screw Compressor, Head Model 12S, S/N 12S93H, Frame Board #7356, S/N 940625 with Micro Master Touchpad Controls, 2955 RPM/3550 RPM, 460 V, 3 Phase, ABB Starter and Toshiba VF-AS1 VFD, 59,868 hrs. (Compressor #2) (Located in Waupun, WI)

Vilter 100 hp 6 Cylinder VMC450XL Ammonia Reciprocating Compressor, Order #F-60378-1, Size A06K456XLP, S/N 63287, 1770 RPM, 460 V, 3 Phase, High Side 525, Low Side 375, 115 V, includes Oil Separator, Ammonia Valves, AB Starter, 0112 hrs.  (Compressor #C4) (Located in Waupun, WI)

2002 Imeco 2-Fan Evaporative Condenser, Model XLP, S/N 32328-1LH, 7.5 hp 460 V, 300 psi (Located in Waupun, WI)

Evaporative Condenser Condensate System includes Aprox. _______ Gal. Rectangular Tank (Tank Dimensions Aprox. 4 ft. W x 6 ft. L x 5 ft. H), (2) Paco 3 hp and 7-1/2 hp Circulating Pumps, Related Pipe, Valves, Fittings and Surrounding System Only including Pulsatron Chemical Treatment System, Related Controls and TB Woods E-Trac WF2 VFD (Located in Waupun, WI)

RVS Horizontal Ammonia Recirculator/Suction Accumulator, Board #2189, S/N 89390 includes (2) Hanson Recirculating Pumps, Related Valves, Piping, Hanson Liquid Level Controls, Hansen Seal Motor Valve Controller, MAWP 150 psi @ 300 Degree F, Min Design Min Temp. 120 Degree @ 150 psi (Overall Dimensions Aprox. 4 ft. W x 13 ft. L x 10 ft. 3″ H) (Located in Waupun, WI)

RVS Horizontal Ammonia Receiver, Board #9847, S/N 97209 with Related Valves and Piping, MAWP 250 psi @ 300 Degree F, MDMT -20 Degree F @ 250 psi (Overall Dimensions Aprox. 56″ W x 12 ft. L) (Located in Waupun, WI)

FES Ammonia Process System Control Panel with Koyo Direct Logix 205 Controls and Touchpad Display (Located in Waupun, WI)

Frigid Coil/Imeco 2-Fan Ammonia Evaporator Blower, Model BCS2A-6210-4-2, S/N 20982-200RH (Unit #14) with Hot Gas Defrost (Located in Room #6) (Located in Waupun, WI)

Frigid Coil/Imeco 2-Fan Ammonia Evaporator Blower, Model BCS2A-6210-4-2, S/N 20982-100LH (Unit #13) with Hot Gas Defrost (Located in Room #6) (Located in Waupun, WI)

Imeco Single Fan Ammonia Evaporator Blower, Model ICB-1B-3110-4-3, S/N 7746-1LH6 (Unit #6) with Hot Gas Defrost (Located in Room #5) (Located in Waupun, WI)

Imeco 2-Fan Ammonia Evaporator Blower, Model 6CS2A-6210-3-2RH, S/N 20982-15002 (Unit #7) with Hot Gas Defrost (Located in Room #5) (Located in Waupun, WI)

Krack 6-Fan Ammonia Evaporator Blower, Model DTX6S-1560-HGU-RBA, S/N 375446A8LH (Unit #5) with Hot Gas Defrost (Located in Room #3) (Located in Waupun, WI)

Frigid Coil/Imeco Single Fan Ammonia Evaporator Blower, Model ICB-1B-3110-4-3, S/N 7746-1RH4 (Unit #1) with Hot Gas Defrost (Located in Room #2) (Located in Waupun, WI)

Frigid Coil/Imeco 2-Fan Ammonia Evaporator Blower, Model BCS2A-6210-3-2RH, S/N 20982-15001 (Unit #2) with Hot Gas Defrost (Located in Room #2) (Located in Waupun, WI)

Vilter 2-Fan Ammonia Evaporator Blower, Model HP28-63-1.5-RA-HGP (Unit #3) with Hot Gas Defrost (Located in Room #4) (Located in Waupun, WI)

Vilter 2-Fan Ammonia Evaporator Blower, Model HP28-63-1.5-RA-HGP, S/N C-1245-3 (Unit #4) with Hot Gas Defrost (Located in Room #4) (Located in Waupun, WI)

Additional Equipment


RVS Aprox. 13 ft. L x 14″ W Shell and Tube Heat Exchanger, Board #7519, S/N 95122 with Stainless Front, Shell Side MAWP 300 psi @ 400 Degree F, Min. Design Min Temp. -20 Degree F @ 300 psi, Tube Side MAWP 150 psi @ 400 Degree F, Min -20 Degree @ 150 psi including Aprox. 5 ft. L x 27″ W x 44″ H Skid-Mounted Horizontal Tank, (2) Fristam 5 hp Centrifugal Pumps, Related Valves, Piping and Controls (Located in Waupun, WI)

Fristam 5 hp Centrifugal Pump with 3″ x 2-1/2″ Clamp Type S/S Head

FES 100 hp Ammonia Screw Compressor, Head Model 12S, S/N 12S129383H, Frame S/N 940191, Board #6987 with FES Micro Master Touchpad Controls, 3550 RPM, 460 V, 3 Phase, 47,195 Hrs. (Uninstalled) (Located in Waupun, WI)

ARPIN LOCATION

Ammonia Refrigeration System – Low Temp 0 Degree to -10 Degree


Frick 450 hp Ammonia Screw Compressor, Screw Head Model/S/N TDSH233S1195E, Frame Model RWBII 177, S/N S0156GFMCTHAA3,  3540 RPM, 460 V, 3 Phase with Frick Digital Touchpad Controls, Ram Starter (Compressor #RC-08) (Located in Arpin, WI)

FES 400 hp Ammonia Screw Compressor, Head Model 300 V1, S/N 9515-502-148, Frame Board #1853, S/N 83244 with FES Micro IIE Touchpad Controls, 3555 RPM, 460 V, 3 Phase, Saftronics Starter, 54,503 hrs. (Compressor #2) (Located in Arpin, WI)

Sullair 450 hp Ammonia Screw Compressor, Frame Model C25SA-37D, S/N 056-01597, 3570 RPM, 460 V, 3 Phase with Starter, 40,226 hrs. (Located in Arpin, WI)

Evapco 2-Fan Evaporative Condenser, Model PMCB-580, S/N 964101M (Located in Arpin, WI)

APV Crepaco 2-Fan Evaporative Condenser, Model CPMA-425, S/N 880872 (Located in Arpin, WI)

APV Crepaco 2-Fan Evaporative Condenser, Model CPMA-425, S/N 879771 (Located in Arpin, WI)

Evaporative Condenser Condensate System includes Aprox. _______ Gal. Rectangular Tank (Tank Dimensions Aprox. 4 ft. W x 10 ft. L x 82″  H), (3) Bell & Gossett (1) 20 hp and (2) 15 hp Circulating Pumps, Related Pipe, Valves, Fittings and Surrounding System Only including Pulsatron Chemical Treatment System, Related Controls (Located in Arpin, WI)

Reco Aprox. 5 ft. W x 12 ft. L x 10 ft. H Ammonia Recirculator System, Board #9689, S/N M910-050A, MAWP 150 psig @ 300 Degree F, 225 Test psig, MDMT -20 Degree F @ 150 psig includes: (2) Circulating Pumps, Hansen Level Control, Related Valves, Piping and Controls (Located in Arpin, WI)

E.L. Nickell Aprox. 17 ft. 8″ L x 32″ W Horizontal Ammonia Receiver, Board #26867, S/N C-3489-3, 300 psi Max. WP Degree F Max. Temp 650, -20 Degree F Min. Temp with Related Valves and Piping

Frigid Coil/Imeco 2-Fan Ammonia Evaporator Blower, Model BCS-2-6210-4-2, S/N 20982-900-RH (Unit #23) with Hot Gas Defrost (Located in Room E) (Located in Arpin, WI)

Frigid-Coil/Imeco 3-Fan Ammonia Evaporator Blower, Model S1GB3L0005LRBHGU1PPCVDC, S/N 30009N1L (Located in Room E) (Located in Arpin, WI)

2000 Krack 2-Fan Ammonia Blower, Model PCNA2S-42631-5RBAHGURH, S/N 540674-10A, 460 V, 3 Phase (Located in Room D) (Located in Arpin, WI)

2000 Krack 2-Fan Ammonia Blower, Model PCNA2S-42631-5RBAHGURH, 460 V, 3 Phase (Located in Room D) (Located in Arpin, WI)

2000 Krack 2-Fan Ammonia Blower, Model PCNA2S-42631-5RBAHGURH, S/N 540674-10B, 460 V, 3 Phase (Located in Room D) (Located in Arpin, WI)

2000 Krack 2-Fan Ammonia Blower, Model PCNA2S-42631-5RBAHGURH, S/N 540674-20A, 460 V, 3 Phase (Located in Room D) (Located in Arpin, WI)

Vilter 2-Fan Ammonia Evaporator Blower, Model VAPL2-3510-RBA-4-1.5-HGULH, S/N _____________, LH (Located in Room C) (Located in Arpin, WI)

Vilter 2-Fan Ammonia Evaporator Blower, Model VAPL2-3510-RBA-4-1.5-HGURH, S/N _____________, RH (Located in Room C) (Located in Arpin, WI)

Imeco 2-Fan Ammonia Evaporator Blower, Model BF-2422-84, S/N _______ with Hot Gas Defrost (Unit #3), (Located in Room B), (Located in Arpin, WI)

Imeco 2-Fan Ammonia Evaporator Blower, Model BF-2422-84, S/N _______ with Hot Gas Defrost (Unit #2), (Located in Room B), (Located in Arpin, WI)

Imeco 2-Fan Ammonia Evaporator Blower Model BF-2422-84, S/N _______ with Hot Gas Defrost (Unit #2), (Located in Room B), (Located in Arpin, WI)

Imeco 2-Fan Ammonia Evaporator Blower, Model BF-2422-___, S/N __________ (Located in Room A), (Located in Arpin, WI)

Imeco 2-Fan Ammonia Evaporator Blower, Model BF-2422-___, S/N __________ (Located in Room A), (Located in Arpin, WI)

Additional Equipment


Frick 150 hp Ammonia Screw Compressor, Head Model/S/N TDSH163S115SA, Frame Model RWBII 60H, S/N S0140FFMPLHAAB, 3540 RPM, 230/460 V, 3 Phase, with Frick/York RWBII Plus Touchpad Controls, 39,862 hrs. (Uninstalled) (Located in Arpin, WI)

York 40 hp 12 Cylinder Ammonia Reciprocating Compressor, Model A3129-5DB, S/N H300958, 1160 RPM, 230/460 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

York 100 hp 12 Cylinder Ammonia Reciprocating Compressor, Model 31-19-5DB, S/N 99807, 1175 RPM, 440 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

York 100 hp 12 Cylinder Ammonia Reciprocating Compressor, Model X0104716, S/N  A3129, 1190 RPM, 230/460 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

York 60 hp 12-Cylinder Ammonia Reciprocating Compressor, Model A316250135, 1190 RPM, 230/440 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

York 100 hp 12-Cylinder Ammonia Reciprocating Compressor, Model F31295DE, S/N K99306, 1190 RPM, 230/460 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

Imeco 2-Fan Ammonia Evaporator Blower (Uninstalled) (Located in Arpin, WI)

York 30 hp 4-Cylinder Ammonia Reciprocating Compressor, Model 3049-7BE, S/N G2013771, 1750 RPM, 208-220/440 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

York 30 hp 4-Cylinder Ammonia Reciprocating Compressor, Model 3049-7BE, S/N G201373, 1770 RPM, 230/460 V, 3 Phase (Uninstalled) (Located in Arpin, WI)

FOND DU LAC LOCATION

11,385 LB. AMMONIA REFRIGERATION SYSTEM (Low Temp. -15 Degree to -20 Degree, Roughly Cooling 60,000 sq.ft.)


2003 Frick 500 hp Ammonia Screw Compressor, Screw Head S/N TDSH233L2699FR, 3570 RPM, 460 V, 3 Phase, 55116 Hours with Frick RWBII Plus Digital Touchpad Controls, Ram Soft Starter and GE Main Switch (Located in Main Switch Control Panel) (Compressor #C6) (Located in Fond Du Lac, WI)

Frick 300 hp Ammonia Screw Compressor, Frame Model #RWBII 399B, S/N S0280SFMFTHAA03, Screw Head S/N TDSH283L1565H, 3560 RPM, 460 V, 3 Phase, 10039 Hours with Frick RWBII Plus Digital Touchpad Controls, Ram Soft Starter and GE Main Switch (Located in Main Switch Control Panel) (Booster) (Compressor #C5) (Located in Fond Du Lac, WI)

Vilter 125 hp 8-Cylinder Ammonia Reciprocating Compressor, Order #E-29R79-2, Size A10K448B, S/N 31202, 1725 RPM, 460 V, 3 Phase, High Side 525, Low Side 375, 115 V, High Stage, includes Oil Separator, Ammonia Valves, Yaskawa A1000 VFD and GE Starter (Located in Main Switch Control Panel) (Compressor #C1) (Located in Fond Du Lac, WI)

Vilter 100 hp 6-Cylinder VMC450XL Ammonia Reciprocating Compressor, Order #F-60378-2, Size A06K456XLB, S/N 63288, 1780 RPM, 460 V, 3 Phase, High Side 525, Low Side 375, 115 V, High Stage, includes Oil Separator, Ammonia Valves, Yaskawa A1000 VFD and GE Starter (Located in Main Switch Control Panel) (Compressor #C2) (Located in Fond Du Lac, WI)

Vilter 75 hp 12-Cylinder Ammonia Reciprocating Compressor, Order #04157-2, Size A1CK4412B, S/N 19827AS, 1780 RPM, 230-460 V, 3 Phase, High Side 320, Low Side 162, 115 V, Low Stage, includes Oil Separator, Ammonia Valves, Yaskawa A1000 VFD and GE Starter (Located in Main Switch Control Panel) (Compressor #C3) (Located in Fond Du Lac, WI)

Vilter 60 hp 12-Cylinder VMC400 Ammonia Reciprocating Compressor, Order #E-29879-1, Size A12B4412B, S/N 22368, 1725 RPM, 460 V, 3 Phase, High Side 400, Low Side 375, 115 V, Low Stage, includes Oil Separator, Ammonia Valves, Yaskawa A1000 VFD and GE Starter (Located in Main Switch Control Panel) (Compressor #C4) (Located in Fond Du Lac, WI)

BAC 4-Fan Evaporative Condenser, Model C1663N, S/N 88600264P with (2) Yaskawa A1000 VFD’s and (2) Siemens 100 Amp Safety Switches (Located in Fond Du Lac, WI)

Evaporative Condenser Condensate System includes Aprox. 2,500 Gal. Vertical Poly Tank (Tank Dimensions Aprox. 86″ W x 109″ H), (2) Pentair 25 hp Circulating Pumps, 1775 RPM, 208-230/460 V, Related Pipe, Valves, Fittings and Filters Surrounding System Only including Advantage & Pulsatron Chemical Treatment System and Related Controls (Located in Fond Du Lac, WI)

E.L. Nickell Ammonia Recirculator System, Board #29444, S/N 31405, Job #C-4841-B with (2) Recirculation Pumps, 150 psi Max. 600 Degree F Max. Temp, -20 Degree F Min. Temp, Related Valves, Piping and Controls, Overall Height 15 ft. 1″ H and Vessel Width Aprox. 90″ W (V-03) (Located in Fond Du Lac, WI)

Wheeler Ammonia Intercooler, Board #2682, S/N 94289, 150 psi @ 650 Degree F MAWP, -20 Degree F @ 150 psi including Related Valves and Piping, Overall Height 12 ft. 4″ H, Vessel Width Aprox. 4 ft. W (Intercooler #1) (Located in Fond Du Lac, WI)

E.L. Nickell Ammonia Intercooler, Board #41922, S/N 44763, Job #C-11451 with 250 psi Max. 650 Degree F MAWP, -20 Degree F @ 250 psi, Related Valves and Piping, Overall Height 10 ft. 4″ H and Vessel Width Aprox. 80″ W (Located in Fond Du Lac, WI)

E.L. Nickell Ammonia Receiver, Board #46586, S/N 49467, Job #C13669, 250 Degree psi @ 650 Degree F MAWP, -20 Degree F @ 250 psi includes Thermosyphon Horizontal Vessel, Related Valves and Piping (V-01 & V-06) (Located in Fond Du Lac, WI)

Ammonia Refrigeration Process Control System includes Direct Logics 205 DL250 CPU PLC Controller, Direct Logic 06 Process Control, Model D0-06AA, Touchpad Display, 2-Door Enclosure with Breakers, Timers and Buttons (Located in Fond Du Lac, WI)

Frick 4-Fan Ammonia Evaporator Blower, Model BCS-4C-10510-37.5, (Unit #AU9) with Hot Gas Defrost and Yaskawa A-1000 VFD (19) (Located in Room #4) (Located in Fond Du Lac, WI)

Frick 4-Fan Ammonia Evaporator Blower, Model BCS-4C-10510-37.5, (Unit #AU10) with Hot Gas Defrost and Yaskawa A-1000 VFD (18) (Located in Room #4) (Located in Fond Du Lac, WI)

Imeco 3-Fan Ammonia Evaporator Blower, Model 1CB-3B-6110-3-1.5, (Unit #AU7) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #7) (Located in Room #3) (Located in Fond Du Lac, WI)

Vilter 3-Fan Ammonia Evaporator Blower, Model BF56-83-2RA, S/N F-31534 (Unit #AU8) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #8) (Located in Room #3) (Located in Fond Du Lac, WI)

Imeco 3-Fan Ammonia Evaporator Blower, Model 1CB-3B-6110-3-1.5, (Unit #AU5) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #5) (Located in Room #3) (Located in Fond Du Lac, WI)

Imeco 3-Fan Ammonia Evaporator Blower, Model 1CB-3B-6110-3-1.5, (Unit #AU6) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #6) (Located in Room #3) (Located in Fond Du Lac, WI)

FrigidCoil/Imeco 4-Fan Ammonia Evaporator Blower, Model ICB4B-8010-3-1.5, (Unit #AU1) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #1) (Located in Room #1) (Located in Fond Du Lac, WI)

FrigidCoil/Imeco 4-Fan Ammonia Evaporator Blower, Model ICB4B-8010-3-1.5, (Unit #AU2) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #2) (Located in Room #1) (Located in Fond Du Lac, WI)

FrigidCoil/Imeco 4-Fan Ammonia Evaporator Blower, Model ICB4B-8010-3-1.5, (Unit #AU3) with Hot Gas Defrost and Yaskawa A1000 VFD (Evap #3) (Located in Room #2) (Located in Fond Du Lac, WI)

FrigidCoil/Imeco 4-Fan Ammonia Evaporator Blower, Model ICB4B-8010-3-1.5, (Unit #AU4) with Hot Gas Defrost and Yaskawa A1000 VFD (F2E2 – 13) (Located in Room #2) (Located in Fond Du Lac, WI)

Glycol System


Skid-Mounted Glycol System includes 2000 APV Plate and Frame Press, S/N 20003003000292, Board #3223 with (94) S/S Plates, Painted Frame, 55″ H Press, Paco 7-1/2 hp Circulating Pump, (2) 5 ft. L x 44″ H x 28″ W Top Mounted Steel Glycol Holding Tanks, Related Valves and Piping Surrounding System with Controls (Utilized for Floor Heating) (Located in Fond Du Lac, WI)