Cheese Packaging and Processing Equipment Auction

Surplus from 4 Major Manufacturers!

 

AUCTION  | ONLINE  |  July 20th, 2016
LOCATION
: Equipment Located in Upper Midwest

Say Cheese!  Cheese Processing Equipment from (4) Major Cheese Manufacturers! 

Processed Cheese Equipment (Natec Line and Associated Equipment)


(2) Rietz Bepex Extructor Extrud-O-Mix, Model RE-24-K9E943, Stainless Steel. Approximate 10,000 pound per hour capacity depending on product. 37″ x 33″ Top feed with hopper. Approximate 8″ diameter shaft with (8) hook knives, (8) stationary bars, 1 end scrapper, 1 die plate with approximate 5/16″ diameter holes, (1) 4-blade end cutter. Hinged end discharge hood. Driven by a 75hp, 3/60/460 volt, 1775 rpm motor thru a Radicon reducer ratio 8.618 to 1. Mounted on a stainless steel frame. Serial# RE-8100 3244 ***Located in Chicago, IL

(2) Marchant Schmidt Rubber Belt Conveyor. 42″ Wide x 138″ long belt. Driven by a 0.50hp, 3/60/230/460 volt, 1800 rpm gear motor. Hinged side panels. Mounted on a stainless steel frame. Serial# 11055-005

APV Crepaco double ribbon blender, Model HD-160DR. 316L stainless steel contact areas. 74″ wide x 90.5″ long x 44″ deep, welded top cover with (2) 18″ man way covers, Qty. (4) spray balls, (2) approximate 6″ diameter shafts with 4″ wide x 1/2″ thick single ribbon, welded to 2″ diameter posts. Each shaft driven by a 22 kw gear motor, standard packing glands, outboard roller bearings. Qty. (2) 3.5″ threaded end bottom outlets, air operated oval outlet, on a stainless steel frame. Serial # C-6901

Crepaco Twin Screw Stuffer, Stainless Steel. Approximate (2) 9” diameter x 5” pitch screws. Non-jacketed trough approximate 32” wide x 90” long x 24” deep with a top conditioning ribbon, screws & ribbon driven by a 10hp gear motor. Includes an APV displacement pump, model R6, driven by a 20hp gear motor ***Located in Chicago, IL

Damrow 600 Pound Twin Screw Steam Cooker, 316 Stainless Steel. Non-jacketed trough 120” long x 15” wide x 12” deep. (2) 8” Diameter x 4” pitch augers. (8) End bottom steam injection ports with manifold. Top end feed, end discharge, top hinged cover. Driven by an approximate 5hp motor. Serial# 0882092 ***Located in Chicago, IL

Damrow Surge Tank, Approximate 80 Gallon, 316 Stainless Steel, Vertical. 38” Diameter x 16” straight side, flat top with (2) 1/3 covers, coned bottom. Bolt on stainless steel agitator bridge with a bottom supported anchor agitator with bottom rake, and side sweep blades. Driven by a 3/4hp, 3/60/230/460 volt, 1760 rpm gear motor, ratio 43 to 1. (2) 3-1/2” Threaded bottom outlets. Mounted on 4 stainless steel leg ***Located in Chicago, IL

Baader Food Processing Machinery Soft Separator, Type 603, Stainless Steel. Approximate 6” wide x 50” long plastic belt in feed. Last used separating plastic wrappers off of cheese slices. Mounted on a stainless steel frame. Serial# 740061 ***Located in Chicago, IL

Natec chill roll stand (3 chrome plated cored rolls and 2 cored press rolls), Natec cold knife station, Natec hot knife station with spare, Natec stacker with spare, Natec control panel, Natec film feed station, and discharge conveyor ***Located in Chicago, IL

Campbell Sasib Packaging WS20-II L.H. Series II Horizontal Flow Wrapper. Approximate 4-1/2” wide 2 up seal jaw, 60” long belt infeed to chain lugs, approximate 7” apart, 36” long outfeed. Electrics 3/60/460 volt, 30 amps. Serial# 5095.0089 ***Located in Chicago, IL

Safeline Power Phase Pro Metal Detector. Approximate aperture opening 15″ wide x 5″ tall, Serial# 107281. Includes a Ramsey Icore Autochek 8000 checkweigher, Serial# 00335295. Approximate 5″ wide x 24″ long discharge belt with air reject ***Located in Chicago, IL

BluePrint Automation Robotic Top Loader, Serial# 597, Job# 13129, Built 2002. Includes infeed product conveyor, and a box infeed roller conveyor. BluePrint Automation Bottom Tape Case Erector, Serial# 848, Job# 16246, Built 2004. Includes box infeed magazine, and a box discharge roller conveyor. 3M-Matic 800af Top Adjustable Case Sealer, Type 39600. 2″ Wide tape capacity. Electrics 60/115 volts, 3.8 amps, 440 watts. Serial# 3346 ***Located in Chicago, IL

Waukesha Universal Rotary Positive Displacement Pump, Model 130, Stainless Steel.  3 1/2″ threaded inlet/outlet, (2) stainless steel rotors. Driven by a 10hp, 3/60/230/460 volt, 1730 rpm gear motor. Mounted on a stainless steel base.  Serial # 440688***Located in Chicago, IL

Control Systems MR30-18 Belt Conveyor Checkweigher. Approximate 50 pound capacity, 18″ wide x 30″ long rubber belt, speed 80 feet per minute, serial# 0301-0-246. Includes a GSE 660 controller ***Located in Chicago, IL

Ecolab CIP System Consisting Of : (2) Approximate 250 Gallon stainless steel tanks, approximate 33″ x 40″ x 44″ tall, (1) approximate 150 gallon stainless steel tank, approximate 26″ x 40″ x 33″ tall, (1) Alfa Laval stainless steel centrifugal pump driven by a 10hp, 3/60/208-230/460 volt, 3500 rpm motor, (1) Enerquip stainless steel U-Tube heat exchanger, (1) control panel with Allen-Bradley PanelView Plus 1250, and miscellaneous valves and piping. Mounted on a stainless steel frame. Ecolab project#37370. Includes miscellaneous valves and piping ***Located in Chicago, IL

CHEESE SHREDDERS 


(5) Urschel Cheese Shredders, M/N RA-D, S/N’s 1685, 1615, 1731, 1304, with 15″ L x 14″ W S/S Hopper, 5 hp Drive, Mounted on Portable S/S Frame, 240 Volts

 

MARCHANT SCHMIDT TUMBLERS 


2012 Marchant and Schmidt Tumbler, M/N 101953001, S/N 30422 001, 57″ Long x 24″ Wide, Mounted on S/S Portable Frame (BG9)

Marchant and Schmidt Tumbler, ID #: 6967-015, 85″ Long x 24″ Wide, Mounted on S/S Portable Frame (BG8)

 

BLENDERS 


(2) American Process System Blenders, M/N SCP-300, S/N 5612 and 5613, with S/S Legs and Load Cell System (BG60 & BG61)

 

 

METAL DETECTORS/CHECKWEIGHERS 


 

Cintex Metal Detector, M/N SC2036, S/N 63733, 9″ Wide x 4″ Tall Opening, 40″ L x 8″ W Conveyor, Digital Touchscreen Display, Mounted on S/S Frame (MC1)

Loma Superscan Micro Metal Detector, 8″ W x 4″ H Opening, 6″ Wide Belt (MC1A)

Mettler Toledo Hi-Speed Checkmate 2 Checkweigher, with Reject Arm and Shoot, Control Display, Aprox. 15 1/2″ W Weighing Conveyor, and 8″ W Product Conveyor, 84″ Long (MC14)

(3) Goring Kerr Metal Detector, Various Sizes, with Conveyor, Mounted on S/S Portable Frames

EXTRUCTOR 


Rietz Extructor, M/N RE-15-K5E328, S/N RE-790193, with 40 hp Motor, 15″ Dia Head, with 21″ Long x 15″ Wide (BG11)

 

CHEESE PACKAGING EQUIPMENT 


2008 Hayssen Ultima Bagger, S/N SV12-16HPR-F, S/N U88007, 230 Volts, with Allen-Bradley PanelView 1000 Touchscreen Display and Allen-Bradley PLC Rack (MC8)

Hayssen Horizontal Wrapper, M/N RT-113, S/N X86699, with Aprox. 10″ Wide Discharge Conveyor (BG10)

Multivac Dual-Chamber Vacuum Sealer, Type AG 800, Masch. Nr. 5066, 31″ L x 25″ W x 3″ Deep Seal Chambers, with Toshiba 7.5 hp Vacuum Pump, 1740 RPM (MC9)

Natec Cheese Stacker, with 6 1/2″ Wide Belt, 240 Volts (MC10)

Triangle Bagger, M/N B65PF4F, S/N 120281, 230 Volts, 1 Phase, with Allen-Bradley 13-Slot PLC, Allen-Bradley PanelView 1000 Touchscreen Display (MC11)

 

PUMPS 

Fristam 7.5 Positive Displacement Pump, M/N FKL250, S/N FKL2500800408, Mounted on Portable S/S Skid, 3 1/2″ x 3 1/2″ Clamp Type S/S Head (BG66)

20 hp Shear Pump, 3525 RPM, Mounted on Portable Frame (BG54)