Pharmaceutical, Food and Beverage Equipment Auction

Featured Auction

AUCTION  | ONLINE  | August 15th, 2016 – August 30th, 2016

LOCATION: Various Locations

M Davis Group is Pleased to Announce that the August Monthly Consignment Auction will Close on Wednesday, August 31st. Please Contact MDG to Consign YOUR Surplus Equipment to the Monthly Consignment Auction on August 31st. Please Contact M Davis Group to Buy or Sell Equipment in the Monthly Online Consignment Auction Occurring Closing on August 31st

Equipment Located in Wisconsin

Scanima / Tetra Pak In-Line High Shear Mixer, Model 1R2S-1500V, S/N 5456-02, CPL Primary, 300 MM – 1,500 Liter, 120 HP, 86 kW, 480 VAC/3/60 (Located in WI #3)

GEA Aseptic Product Recovery Pigging System, 3″ and 4″, AISI316L, Sterilization up to 140 Degree C(Located in WI #13)

2011 Feldmeier Approx 1,200 Gallon Processor, S/N 1112630302B, Dome-Top / Sloped Bottom, Jacket MAWP 150 PSI @ 205 Degree F, Jacket MDMT -20 Degree @ 150PSI, 316L S/S (Located in WI #4)

Reactor Tank with Agitation, Dome-Top / Sloped-Bottom, Center Outlet, Operator Ladder, Side Man-Way (Located in WI #5)

2011 GEA S/S Plate Frame Heat Exchanger, Model VT20 CDL-C-16, S/N 170/23733, A-Max 393 mm, A-Min 386 mm, Design Pressure Max (pri/sec) 15 Barg, Design Temperature Max (pri/sec) 121,00 Degree C, Test Pressure (pri/sec)19,50 barg, Plates 103 VT20 PHV L, AISI 316, 0,60 mm, NBR-HT, Glueless Gasket, Internal Flow: Primary 3 x 17 Secondary 3 x 17, Temp: 14515 kg/h Cooling Water from 35,00 Degree C to 4,44 Degree C, Program 20,44 m3/h Chilled Water 1,11 Degree C to 22,78 Degree C (Located in WI #6)

2011 GEA S/S Plate Frame Heat Exchanger, Model VT20 CDL-C-16, S/N 170/23732, A-Max 453 mm, A-Min 486 mm, Design Pressure Max (pri/sec) 15 Barg, Design Temperature Max (pri/sec) 121,00 Degree C, Test Pressure (pri/sec)19,50 barg, (Section 1) Plates 25 VT20 PV L, AISI 316, 0,60 mm, NBR-HT, Glueless Gasket, Internal Flow: Primary 1 x 12 Secondary 2 x 6, Temp: 14515 kg/h Cooling Water from 62,78 Degree C to 60,00 Degree C, Program 909 kg/h RO Water From 15,56 Degree C to 60,00 Degree C, (Section 2) Plates 25 VT20 PH L, AISI 316, 0,60 mm, NBR-HT, Glueless Gasket, Internal Flow: Primary 1 x 12 Secondary 1 x 12, Temp: 14515 kg/h Cooling Water from 59,83 Degree C to 45,00 Degree C, Program 14515 kg/h Tower Water From 29,44 Degree C to 44,29 Degree C, (Section 3), Plates 32 VT20 PH L, AISI 316, 0,60 mm, NBR-HT, Glueless Gasket, Internal Flow: Primary 1 x 15 Secondary 1 x 16, Temp: 14515 kg/h Cooling Water from 40,76 Degree C to 18,33 Degree C, Program 12247 kg/h Chilled Water From 1,11 Degree C to 27,64 Degree C,(Located in WI #7)

Sweco Vibro-Energy Separator / Sifter, Model Vibro-Energy PS60S248P4SDSFWO, S/N 300635-A06/05, 5 HP, 1160 RPM, 3 Phase, 215T Frame, Cont Duty, 1.15 SF, 460 V, 60 Hz, 7.8 AMPS (Located in WI #8)

2013 GEA NU-CON Rotary Powder Valve, Model CV 1250 DEM, S/N 21310139, Demountable Rotary Valve, ANSI Style Flange,(Located in WI #9)

Nol-Tec Systems Surge Hopper (Located in WI #10)

Westinghouse DMN Plug Type Diverter, Model PTD 80 MII, S/N DVUS 130326, Bulk Solids Handling (Located in WI #11)

Nol-Tec Systems Skidded Vacuum Hopper Filter / Receiver, Model 36FR12, S/N 39335, Pressure Vessel, Magnehelic Gauge, Air Manifold, Control Enclosure (Located in WI #12)

Equipment Located in Michigan

Containment Technologies Group Portable Aseptic Isolator / Containment Glove Box, Model Enguard, S/N 1210-NG-1040, Three Chamber System, Aseptic Filling Isolator Chamber, Mounted on Casters, 12’10” x 4’8” x 6’3” (L x W x H), 120 V/1 Ph/60 Hz (Loading Included in Sales Price, Bueyr Must Bring Ramp to Load and Straps to Secure)***FRMNT

Equipment Located in Missouri

2012 Multivac Handling Module, Model # H050, Serial # 158613, Precision Package Separation, w/ 2-Axis 2-Position Vacuum Gripper, Automates Pack Separation for Multi-Track Packaging Systems Cost Effectively and Hygienically, 540 ww on Conveyor Belt in Machine, Conveyor Length 520 W on Belt, 1000 mm L x 1950 mm W x 1735 mm H.(Located in Missouri)

2012 Multivac Handling Module, Model # H050, Serial # 158613, Precision Package Separation, w/ 2-Axis 2-Position Vacuum Gripper, Automates Pack Separation for Multi-Track Packaging Systems Cost Effectively and Hygienically, 540 ww on Conveyor Belt in Machine, Conveyor Length 520 W on Belt, 1000 mm L x 1950 mm W x 1735 mm H.(Located in Missouri #293)

Never Used 2012 S/S Multivac Handling Module, Model #H050, Serial# 158612, Precision Package Separation, w/ 2-Axis 2-Position Vacuum Gripper, Automates Pack Separation for Multi-Track Packaging Systems Cost Effectively and Hygienically, 540 ww on Conveyor Belt in Machine, Conveyor Length 520 W on Belt, 1000 mm L x 1950 mm W x 1735 mm H (Located in Missouri #294)

New 2012 S/S Multivac Handling Module, Model #H050, Serial # 158614, Precision Package Separation, w/ 2-Axis 2-Position Vacuum Gripper, Automates Pack Separation for Multi-Track Packaging Systems Cost Effectively and Hygienically, 540 ww on Conveyor Belt in Machine, Conveyor Length 520 W on Belt, 1000 mm L x 1950 mm W x 1735 mm H (Located in Missouri #295)

2004 Nutec 720 Patty Patty Former, S/N 720 04 05, Assortment of Spare Parts and Tooling Included, Recently Removed from Production, Reported In Good Operating Condition 460/3/60 (Located in Missouri # 291)

2001 Nultec 720 Patty Former, S/N 720 1020, Assortment of Spare Parts and Tooling Included, Recently Removed from Production, Reported in Good Operating Condition, 460/3/60 (Located in Missouri #292)

Detectronic Portable Metal Detector, Mounted on Conveyor with Drive, Mounted on S/S Legs with Wheels (Located in Missouri # 297)

2002 VC999 Roll Stock Thermoformer, Model VC999 RS355, S/N RS35502118320, Included: (2) Die Sets, (2) Guillotines, Rietschle 100 Pump, 3/220/60, 65A Current, 15 Kw,75 AT, 7 BAR, Reported in Good Working Condition (Located in Missouri #275)

2006 VC999 Roll Stock Thermoformer / Vacuum Packager, Model VC999 RS285, S/N RS28506282300, Pre-Heat Pug assist Die, LOTS of Extra Parts, Tooling and Valves, Ideal for Chicken or Turkey with Current Tooling, Reported Good Running Condition (Lcoated in Missouri #289)

Multivac R5100 Roll Stock Thermoformer (HFFS), Recently Refurbished with New Bladders, New Hoses, New Springs, New Gaskets, New Valves, New Chains, New Bearings, New Safety Covers, New Transformer, New 2 Track and 1 Row Insert,  Sdie Evacuation, Gas Flush Capability, Trim Windup, (52) Rolls of Forming and Non-Forming Film Included, Reported Good Operating Condition (Located in Missouri #290) Note: Vacuum Pump Not Included

2007 Multivac C400 Singel Chamber Vacuum Packager, S/N 118107, 220/3/60,  Reported Very Good Operating Condition (Located in Missouri #276)

Garos S/S Meat Tenderizer, Reported Good Operating Unit (Located in Missouri #277)

Garos Meat Injector, Reported Good Operating Condition, Recently Removed From Production (Located in Missouri #278)

Marel S/S Portion Scale (Located in Missouri #279)

Dectronic Metal Detector (Located in Missouri #280)

Marel Splitter (Located in Missouri #281)

Ross Steak Press, Model 914, S/N 1247, Reported Good Condition (Located in Missouri #282)

Marel Townsend 9000 Series Poultry Skinner (Located in Missouri #283)

(2) Butcher Boy S/S Grinder (Located in Missouri #284 & 285)

Mettler Toledo Micromate Check Weigher (Located in Missouri # 286)

MR Series Pressure Sensitive Labeler (Located in Missouri #287)

Bridge Tote Lift / Loader, Model LL-96, S/N 27310-EA, 480/3/60 (Located in Missouri #288)

Equipment Located in New York

Stokes DS3 Tablet Press – Model: DS3, 3 Hp, 3 Ph, 60 Hz, 208-220/440V, 15-Station.  As shown in photos (Located in New York #232) Loading Included in Sales Price

Cherry Burrell Colton 216 Tablet Press, Model: 216, 2 Hp, 3 Ph, 60 Hz, 230/260 V, 16-Stationn (Located in New York #233) Loading Included in Sales Price

Patterson Kelley 8Qt Liquid Solids Vblender, Lexan Shell (Shell split at seam #235), with covers, bar, As shown in photos  (Located in New York) Loading Included in Sales Price

Pro Flow Modular Fluid Systems Steam Injector.  Mfg 2007.  As shown in photos (Located in New York #242) Loading Included in Sales Price

Rooney Semi Automatic Can Seamer.  Machne No 81. As shown in photos (Located in New York #243) Loading Included in Sales Price

Canco Vacuum Can Seamer.  Model 08 VAC, 3 Hp Motor.  As shown in photos (Located in New York #244) Loading Included in Sales Price

Anchor Mark Capsule Loader. Model PCL-V28, Serial 566, 110 Volts (Located in New York #245) Loading Included in Sales Price

Aeromatic Fluid Bed Dryer. Model Strea1, Serial 9623, 115 Volts (Located in New York #246) Loading Included in Sales Price

Hassia StickPack VFFS. Model SVL 16/24, Serial 109800-1000 (Located in New York #247) Loading Included in Sales Price

Kaps All Retorquer. Model FE4-R, Serial 4912 (Located in New York #248) Loading Included in Sales Price

West Capper – NO RESERVE – M# RW500, S# 158, 115 Volt, 60 Hz, 1 Phase.  with parts for 3,5,10,20,30 & 50 ML Bottles.  As shown in photos  (Located in New York #200) Loading Included in Sales Price 

NEM Retorquer(Located in New York #251) Loading Included in Sales Price

PAM Pharmaceutical Vacuum Pump, Model DVP-017, 2 HP, 220 Volt, 60 Hz (Located in New York #252) Loading Included in Sales Price

Pump Model: DWM-2, rated 700 Liters/Minute (Located in New York #253) Loading Included in Sales Price

Vector-Colton Granulator. Model 542, Serial 40782 (Located in New York #255) Loading Included in Sales Price

Blender Bars with Cart (on Wheels) – Patterson Kelley, Gemco – Twin Shell and Couble Cone Bars. As shown in photos (Located in New York #256) Loading Included in Sales Price

LSI Labeler – NO RESERVE -M# 2188, S# 180607R, comes on stand.  As shown in photos  (Located in New York #201) Loading Included in Sales Price

NJM Final Touch Labeler – NO RESERVE -Model 400R, Serial 400R-0104 M06L0056, 115 Volts, 1 Ph, 60 Hz, 10 Amp; Air 80 PSIG,  As shown in photos (Located in New York #202) Loading Included in Sales Price

FP Development Rotary Table – NO RESERVE – 24″ Diameter, Variable Speed Control.  As shown in photos (Located in New York #204) Loading Included in Sales Price

FP Development Rotary Table – NO RESERVE – 24″ Diameter, Variable Speed Control, as shown in photos  (Located in New York #205) Loading Included in Sales Price

MGS Pick and Place – NO RESERVE – Model IPX-270S, Serial 11099, 220 Volts, 3 Phase, 60 Hz, 10 Amp, Mfg 11-2004, Unit appears unsused – still in original crate.  As shown in photos  (Located in New York #206) Loading Included in Sales Price

MGS Leaflet Inserter – NO RESERVE – Model 105-230, Serial 4057,  115 Volts, 1 Phase, 60 Hz, 15 Amp, Machine is on wheels.  As shown in photos  (Located in New York #207) Loading Included in Sales Price

MGS Topserter/Outserter – NO RESERVE – Model RPP-2210, Serial 5827, 115 Volts, 1 Phase, 60 Hz, 30 Amp.  Skid is not included.  As shown in photos  (Located in New York #208) Loading Included in Sales Price

Murzan Pump, Stainless Steel.  Skid not Included. As shown in photo (Located in New York #209) Loading Included in Sales Price

Stainless Steel Vibratory Feeder – NO RESERVE – Vibratory Feeders.  Hopper Size: 23″ X 29″ X 17″Deep Overall Height: 42″.  Skid not included, As shown in photos (Located in New York #210) Loading Included in Sales Price

Stainless Steel Vibratory Feeder – NO RESERVE – Vibratory Feeders.  Hopper Size: 23″ X 29″ X 17’Deep, Overall Height: 47″.  Skid not included.  As shown in photos  (Located in New York #211) Loading Included in Sales Price

Thomas Engineering 48″ Accelacota, Model:  48 S, Serial:  48-853. With spray arm and nozzles. As shown in photos (Located in New York #212) Loading Included in Sales Price

Resina Retorquer, Model:  NRT20-121, Serial:  2000 10320, No Conveyor. As shown in photos (Located in New York #213) Loading Included in Sales Price

Thomas Engineering 60″ Accelacota Coating System. Model:  60-111, Serial: 577  60″ Diameter.  System comes with Spray Arm, Air Handler (steam), Exhaust Fan.  Blower is driven by a 25 Hp 230/460 Volt, 60 Hz, 3 Phase Motor. As shown in photos (Located in New York #214) Loading Included in Sales Price

Thomas Engineering 60″ Accelacota Coating System. Model:  60-111, Serial: 542  60″ Diameter.  Comes with Spray Arm . As shown in photos (Located in New York #215) Loading Included in Sales Price

Tote Inc 10 CFT Bin.  75 Gallon Capacity, Stainless Steel.  32″ X 28″ X 12″ Straight Side with a 21″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #216) Loading Included in Sales Price

Tote Inc 10 CFT Bin.  75 Gallon Capacity, Stainless Steel.  32″ X 28″ X 12″ Straight Side with a 21″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #217) Loading Included in Sales Price

Tote Inc 10 CFT Bin.  75 Gallon Capacity, Stainless Steel.  32″ X 28″ X 12″ Straight Side with a 21″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #218) Loading Included in Sales Price

Tote Inc 10 CFT Bin.  75 Gallon Capacity, Stainless Steel.  32″ X 28″ X 12″ Straight Side with a 21″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #219) Loading Included in Sales Price

Tote Inc 10 CFT Bin.  75 Gallon Capacity, Stainless Steel.  32″ X 28″ X 12″ Straight Side with a 21″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #220) Loading Included in Sales Price

Tote Inc 10 CFT Bin.  75 Gallon Capacity, Stainless Steel.  32″ X 28″ X 12″ Straight Side with a 21″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #221) Loading Included in Sales Price

Tote Inc 12 CFT Bin.  90 Gallon Capacity, Stainless Steel.  36″ X 30″ X 13″ Straight Side with a 25″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #222) Loading Included in Sales Price

Tote Inc 12 CFT Bin.  90 Gallon Capacity, Stainless Steel.  36″ X 30″ X 13″ Straight Side with a 25″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #223) Loading Included in Sales Price

Tote Inc 12 CFT Bin.  90 Gallon Capacity, Stainless Steel.  36″ X 30″ X 13″ Straight Side with a 25″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #224) Loading Included in Sales Price

Tote Inc 12 CFT Bin.  90 Gallon Capacity, Stainless Steel.  36″ X 30″ X 13″ Straight Side with a 25″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #225) Loading Included in Sales Price

Tote Inc 18 CFT Bin.  135 Gallon Capacity, Stainless Steel.  40″ X 34″ X 14″ Straight Side with a 30″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #226) Loading Included in Sales Price

Tote Inc 18 CFT Bin.  135 Gallon Capacity, Stainless Steel.  40″ X 34″ X 14″ Straight Side with a 30″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #227) Loading Included in Sales Price

Tote Inc 18 CFT Bin.  135 Gallon Capacity, Stainless Steel.  40″ X 34″ X 14″ Straight Side with a 30″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #228) Loading Included in Sales Price

Tote Inc 33 CFT Bin.  250 Gallon Capacity, Stainless Steel.  53″ X 45″ X 19″ Straight Side with a 40″ Cone and 10″ Diameter Discharge.  Mounted on a Stackable Fork Lift access frame.  18″ top-mounted manway (Located in New York #229) Loading Included in Sales Price

PDC 65M Neck Bander, M# 65M, S# 113, 240 Volts, 1 Phase, 10 Amp.  As shown in Photos (Located in New York #230) Loading Included in Sales Price

Garvey Conveyor Model: 9700, Serial: 12744, Conveyor length: 24″wide X 36″ Long feeds down to  6″ Wide X 42″ long, 115v, 60 hz (Located in New York #231) Loading Included in Sales Price

Parts for Stokes & Manessty Tablet Presses – NO RESERVE – for B2’s, D3’s, DS3’s, Layerpress,Manesty MKI. Many parts in original boxes appear unused  (Located in New York #234) Loading Included in Sales Price

Change Parts for Elanco 8 – NO RESERVE – Size 3 (Located in New York #236) Loading Included in Sales Price

Change Parts for Elanco 8 – NO RESERVE – Size 3 (Located in New York #237) Loading Included in Sales Price

Change Parts for Elanco 8 – NO RESERVE – Size 4 (Located in New York #238) Loading Included in Sales Price

Change Parts for Elanco 8 – NO RESERVE – Size 4 (Located in New York #239) Loading Included in Sales Price

Bosch GKF 1200 or 1500 Partial Change Parts – NO RESERVE – Parts Include:  Dosing Discs: Size 2 (qty.3) 12.8, 13.4, 19.0, Size 3 (qty.4) 9.8, 15.0, 15.0, 15.0, Size 4 (qty.4) 10.0, 12.5, 14.35, 15.87, Partial Change Parts Size 0Qty.4 – Large Aligment Pins Qty.1 – Small Alignment Pin Size 1 Qty. 71 – Dosing Pins Size 2 Qty.6 – Magazines Qty.1 – Orientator Qty.4 – Fingers Qty.27 – Upper Segments Qty.21 – Lower Segments Qty. 3 – Large Alignment Pins Qty.1 – Small Alignment Pin Qty. 292 – Dosing Pins Size 3 1 Set missing Magazine & Large Alignment Pin. Qty.3 – Upper Segements Qty.1 – Lower Segment Qty.4 – Small Alignment Pins Qty.15 – Dosing Pins Size 4 Qty.2 – Magazines Qty.3 – Upper Segments Qty.78 – Dosing Pins (Located in New York#240) Loading Included in Sales Price

Bran and Luebbe Metering Pump- NO RESERVE – Model N-CS32 Driven by a 15Hp, 230/460 Volt, 60 Hz, 3515 RPM Motor.  As shown in photos  (Located in New York #241) Loading Included in Sales Price

Lab Pump (Located in New York #249) Loading Included in Sales Price

Masterflex Pump Model 77601-10 & Drive, Moodel 7592-40 (Located in New York #250) Loading Included in Sales Price

SWPL Vacuum Pump. Model 030V, Rated at 1500 Liters/Minute, driven by a 3 HP motor. (Located in New York (#254) Loading Included in Sales Price

Equipment Located in North Carolina

2008 Feldmeier Tube in Tube Pasteurization System, Model Tube in Tube 65 Gallon/Minute, S/N S 774 08, Product Contact Straight Tubes are AL6XN with Bright Annealed Finish, Non Product Contact Tubes are 316L SS, All Externals 304SS Stainless Steel Construction, Designed to Run 65 Gallons/Minute of Various Sauces – Barbecue, Honey, Jams, Jellies, Salsa, Bloody Mary Drink Mixer, Heat Exchanger Tubes mounted on SS Racks and Pitched for Drainage, Product 180 U-bends are to be Feldmeier Oversized and Free Draining Type and Constructed of 316L SS, Heats Product from 70F to 195F Using 300 Gallons/Minute of Hot Water at 230ºF, Hot Water Pressure Drop of 31 PSI, Product Pressure Drop of 120 PSI, Recommended CIP is 180 Gallons/Minute. Units Consists of 72 Double Tube Assemblies 2 1/2in x 1 1/2in x 32 feet 6 in Long Arranged 6 x 12(Located in North Carolina #70)

2003 Batch Blending Skid with Feldmeier 300 Gallon Liquifier, S/N E-905-03, Skid Mounted Batch Processing System – Last Used to Mix a Tomato Salsa Product Prio Sending to HTST Then to Filler, 2003 Feldmeier Single Wall Liquifer with 40HP Offset Motor, 2004 AGC Plate and Frame Heat Exchanger Model PRO31M, S/N 03332 with Hot Water Set, (2) 7.5HP Centrifugal Pumps, Allen Bradley VFD Drive, Micro Motion Mass Flow Meter, (5) Pneumatic Valves, Overall Skid Size is 14 feet long x 100 inches wide x 90 inches tall, Includes Ingredient Platform and Mezzanine, Excellent Condition (Located in North Carolina #72 )

I&H 8x30 Stainless Steel Can Warming or Cooling Tunnel, Plastic Intralox Bed measures 8 feet wide x 30 Feet Long, Includes Pumps, Tube and Shell Heat Exchanger, Control Panel, Air Knife Discharge, Last Running 12oz. Cans at 1100 CPM, Last Running in 2014(Located in North Carolina #69A)

10,000 Gallon Stainless Steel Silo, Stainless Steel Interior and Exterior, Side Manhole, Last used in a Beverage Plant, Sloped Bottom (Located in North Carolina #71)

Walker 8000 Gallon S/S Vertical Mixing Tank, Stainless, Dome Top/Dish Bottom, Side Mounted Agitator, Side Man way, Carbon Steel Legs, Lifting Eyes, CIP Spray ball, 3″ Inlet and Outlet, Center Discharge on Bottom, Last used in a Food Plant, Sloped bottom to drain(Located in North Carolina #73 )

Walker 8000 Gallon S/S Vertical Mixing Tank, Stainless, Dome Top/Dish Bottom, Side Mounted Agitator, Side Man way, Carbon Steel Legs, Lifting Eyes, CIP Spray ball, 3″ Inlet and Outlet, Center Discharge on Bottom, Last used in a Food Plant, Sloped bottom to drain(Located in North Carolina #74 )

Cream City 7800 Gallon S/S Horizontal Storage Tank, Front Manhole Access, Center Front Discharge, Mounted on Legs, Last used in Soda Blending Room to store product, In Operation up to October 2015 (Located in North Carolina #75 )

Cream City 7800 Gallon S/S Horizontal Storage Tank, Front Manhole Access, Center Front Discharge, Mounted on Legs, Last used in Soda Blending Room to store product, In Operation up to October (Located in North Carolina #76 )

Feldmeier 6,000 Gallon Vertical Single Wall Batch Mixing Tank, S/N N-313-00, Stainless Steel Construction, #4 Finish internal, CIP Sprayball, Dome Top, Dish Bottom, Center Discharge on Bottom, Several Inlets at Top, Vertical Tank with Top Mounted Agitator, Last Used as a Blend Tank in Large Juice Facility, Mounted on SS Legs, Top Manhole, Made in 2000, 123in Overall Diameter x 207in Overall Height(Located in North Carolina #77 )

Cherry-Burrell 5,000 Gallon Vertical Mixing Tanks Model CVL 5000, S/N E-013-91-1, Stainless Steel Construction, #4 Finish Inside, 16in x 20in Side Manway, 5HP Top Mounted Agitation, CIP Sprayball, Dome-Top / Dome-Bottom, 12 Gauge, Center Discharge on Bottom, Multiple Inlets at Top, Last used in Beverage Application(Located in North Carolina #78 )

Cherry-Burrell 5,000 Gallon Vertical Mixing Tanks, Model CVL 5000, S/N E-013-91-2, Stainless Steel Construction, #4 Finish Inside, 16in x 20in Side Manway, 5HP Top Mounted Agitation, CIP Sprayball, Dome-Top, Dome-Bottom, 12 Gauge, Center Discharge on Bottom(Located in North Carolina #79)

5,000 Gallon Jacket Glycol Tank (Located in North Carolina #80 )

SFI 3,000 Gallon Insulated  Storage Tank, S/N 4378-5, Insulated Fermentation Tank, Last used in Yogurt Plant, Multiple Inlets on Top of Tank, Cone Bottom with S/S Legs, Top Manway Opening of 18in, Projectile Well for RTD and Thermometer, #4 Finish, CIP Sprayball, 3in Chloride and Asbestos Free Fiberglass Insulation, 108in Diameter x 156in Height (Located in North Carolina #81 )

1,600 Gallon Vertical S/S Mixing Tank, Single Wall, Dome Top, Dish Bottom, S/S Legs, 3″ Center Bottom Outlet, 30″  x 16″ Top Manhole, Interior Baffles with Bridge Top Mounted Lightnin Agitator Model 47Q25V, 25 HP Motor, Several Blades on Agitator (Located in North Carolina #82 )

Girton 1,000 Gallon Jacketed Mixing Tank, Model 23M001-1, S/N 3M01, Last used in Bottled Water Plant, Flat Top with Hinge Lid, Sloped Bottom, Stainless Steel Legs, Top Agitation, 91in Diameter x 102in Height, CIP Sprayball (Located in North Carolina #83 )

Potter & Rayfield 1,000 Gallon Stainless Steel Vertical Mixing Tank, S/N 416, Single Wall Tank, Last used in Soft Drink Plant, Flat Top – Top Manhole, Sloped Bottom, Stainless Steel Legs, Side Agitation, 65in Diameter x 91in Height (Located in North Carolina #84 )

500 Gallon Stainless Steel Jacketed Processor, Dish Top, Dish Bottom, Top Agitation, Bottom Discharge, Top Manhole, Last Used in Food Plant,75in Diameter x 105in Tall (Located in North Carolina #85 )

Approx 500 Gallon Stainless Steel Mixing Kettle, SPX Lightin Mixer, Top Hinged Lids, Mounted on Legs(Located in North Carolina #86)

APV Crepaco S/S Heat Exchanger, Model R56-S, S/N 20557, Last Used in Blending Room to Warm Water, Great Condition(Located in North Carolina #87 )

600 Gallon CIP System, Single Wall Tank, Sumitt Centrifugal Pump Model 219MTO, Size 1.5×3-10 SS Interior with 40 HP motor, Heat exchanger, Control Panel and Associated Pipes and Fittings, Last Used as Part of CIP System- Tank Manufactured by CFR, Model 600 GAL TK, S/N 8327-001, Control Panel has Panelview 1000, Chart Recorder, Stainless Steel Skid Mounted(Located in North Carolina #88 )

Delkor Spotpak Top Load Case Packer, Model SP-RH-SL, S/N SP-2059, Robust Gantry Style Pick-and-Place Robot Assembles Spot-Pak Shippers at Production Rates up to 150 Primary Package Containers Per Minute, Designed for Safe and Reliable Performance in a Washdown Environment, Last Setup for Yogurt Type Tubs on to a Flat Rray, Loads Product from Top Using Suction Cups, All S/S Construction, Allen Bradley Micrologix PLC, Good Condition (Located in North Carolina #89 )

Lantech Pallet Wrapper, Model Q1000, S/N QA002207, Automatic Pallet Wrapper with 5 Foot Infeed and 5 Foot Discharge Conveyors at 18in Elevation, 460 Volts, 3PH, 60HZ, 80 PSI, Safety Caging, Wraps up to 45-60 Loads per hour, Max. Pallet Height – 80in, 20in Film, 200% Pre-Stretch, Max Pallet Weight 4000 Pounds (Located in North Carolina #90 )

Orion Pallet Wrapper Semi-Automatic Flex Series, Model LPD, S/N V1245, Semi-Automatic Pallet Wrapper, Clean Machine, Fully Operational, Last used in Consumer Goods Plant, Floor Level Unit, 120 Volts (Located in North Carolina #91 )

Lantech Pallet Wrapper, Model S1500, S/N S-0174, Automatic Pallet Wrapper with 5 Foot Infeed and 5 Foot Discharge Conveyors at 18″ Elevation, 230-460 Volts, 3PH, 60HZ, 80 PSI, Safety Caging, Wraps up to 45-60 Loads per hour, Max. Pallet Height – 80in, 20in Film, 200% Pre-Stretch, Max Pallet Weight 4000 Pounds (Located in North Carolina #92 )

Freedom Pallet Wrapper (Located in North Carolina #91A)

Hartness 825 Case Packer, Model 825, S/N 8-413, 480 Volts, 3 Phase, 60 Hertz, 45in Bottle Chain Elevation, Change Parts (Located in North Carolina #93)

Hartness 100 Case Packer, Model 100, Stainless Steel Construction, Grids for .5L in 24 Packs and 2L in 8 Packs, Dependable and Reliable unit, Will Pack into Plastic shells or Boxes (Located in North Carolina #94)

Zambelli Tray Packer with Shrink Wrapper and Heat Tunnel, Model LFT30-VCS, S/N 4276, Machine Forms Trays, Packs and Wraps Trays (Multi-Packer) with Clear or Printed Film, Also Runs Pads or Film Only Bundles, 8 Lane Wide Infeed Conveyor for Large Format Packages, Last Ran 12 Packs Tray or Pad Plus Film, Dual Lane 6-Pack Bundles Film Only, 24 Pack Tray + Film, 32 Pack Tray + Film, Multiple Configurations Available, Allen Bradley PLC Controls with Touchscreen, Nordson ProBlue Glue System, Will run PET Bottles or Cans (Located in North Carolina #95)

SWF Tray Former, Model 1T4K, S/N 6071, Nordson Glue System, Compact Design, Vacuum Assist for Trays, Quick Change Machine, Last used on Variety Pack secondary line, speeds up to 30 trays/minute, 7in min. to 34in max for length, 8 1/8in min. to 22in max for width, 1in min. to 10in max for height of erected trays, Very Good Condition (Located in North Carolina #96)

Wayne Automation Corps Case Erector, S/N 1870-3120, Fully Automatic Cases Erector with Extended Infeed Magazine for Blanks (Holds 450 Cases), Nordson ProBlue Glue System, Will run RSC or HSC Cases, Last Making 12 Pack Boxes but will Erect Assortment of Box Sizes, Adjustable – Quick and Easy Changeovers, Light Curtain for Safety, Speeds up to 35 Cases Per Minute, 480 Voltage, 3 Phase, 60 Hertz (Located in North Carolina #97)

All-Fill Inline Checkweigher, Model PW-12, S/N 980346, Last Running Cartons of Consumer Goods, Left to Right Direction of Travel, Stainless Steel Construction, 110 Volt – Single Phase Power, Touchscreen Operator Controls, Standard E-Start/Stop,Capable of speeds from 20 – 200 packages per minute. Can handle package weights up to 3628 grams with accuracies of +/- 1 gram. 10 pounds with dimensions up to 15in (long) x 10in (wide). Can handle up to 14in long x 8in wide packages. Equipped with 8in wide x 34in long infeed belt, 8in wide x 14in long belt load cell with lexan cover, 8in wide x 14in long belt air reject station, push button operator interface with LED display, 25 program storage and status light bar. Mounted on stainless steel frame with screw in leveling pads for a current infeed and discharge height of 36in (Located in North Carolina #98)

Zepf Technologies/Meyer Hawk Uncaser, Model HU-10, S/N 9085, Last Setup for 16oz. and 20oz. Beer Bottles up to 600 BPM, Setup for 480 Volts, 3 Phase, 60 Hertz, Stainless Steel Shrouding, Adjustable to Run 12 Packs and 24 Packs with Change Parts (Located in North Carolina #99)

48 Inch Rotary Stainless Steel Accumulation Turntable with Drive Motor (Located in North Carolina #100)

2009 Ingersoll Rand 1700 SCFM Air Dryer, Model D1700INA400, S/N 337156, Last running at Food Processing Plant supporting Air compressors, last operational 2016, 460 Volts, Refrigerant is R404, Very Good Condition(Located in North Carolina #101)

Video Jet Ink Jet Coder Excel, Model 273SE, S/N 062721040WD, Auto Flush(Located in North Carolina #102)

Video Jet Ink Jet Coder, Model 43S, S/N ZH061930012 On Stainless Steel Stand with Casters (Located in North Carolina #103)

Domino Laser Coder, Model S200 Plus, S/N 082224-0709(Located in North Carolina #104)

Waukesha Positive Displacement Pump, Model 130, S/N D072078SS, 2.5HP,  3in IN 2in OUT(Located in North Carolina #105)

Waukesha Positive Displacement Pump, Model 130u1, S/N: 2922095r2-3, 5HP, 3in IN 3in OUT, 230-460 Voltage, Rebuilt in 2014(Located in North Carolina #106)

Waukesha Positive Displacement Pump, Model 60, S/N: 164306, 3HP,  2in IN 2in OUT(Located in North Carolina #107)

Wright Flow Positive Displacement Pump, Model 0600TRA20, S/N 07L5553, 5HP, 2in IN 2in OUT(Located in North Carolina #108)

Fristam Centrifugal Pump, S/N 421710651, 5HP, 3in IN 2in OUT(Located in North Carolina #109)

Waukesha Positive Displacement Pump, Model 030, S/N  261074 00, 3HP,  2in IN 2in OUT(Located in North Carolina #111)

Waukesha Positive Displacement Pump, Model 060U1 0901-11, S/N 1000002702490, 7.5HP, 3in IN 3in OUT, Voltage: 330/575 (Located in North Carolina #112)

CNP Centrifugal Pump, Model YS9052, S/N 3500, 5-1/2 HP, 1in IN 2in OUT(Located in North Carolina #113)

Alfa Laval Positive Displacement Pump, Model SRU3 038 HS, S/N 420334B, 3HP, 3in IN 3in OUT, Mounted on S/S Base(Located in North Carolina #114)

Fristam Centrifugal Pump,S/N FPX742961802,15HP, 3in IN 2in OUT(Located in North Carolina #115)

Waukesha Positive Displacement Pump, Model 6U1, S/N 159043, 1HP, .5in IN .5in OUT, 330/575 Volts(Located in North Carolina #116)

2006 Wright SS Centrifugal Pump, S/N 061506008,10HP, 2″ IN 2-1/2″ OUT(Located in North Carolina #117)

CNP Centrifugal Pump, Model YS90S2, S/N 3455, 5-1/2 HP, 1in IN 2in OUT(Located in North Carolina #119)

Waukesha Centrifugal PURITI Pump, Model 216, S/N 231324 98, 5 HP, Missing Head(Located in North Carolina #120)

Penfield Liquid Treatment  System, Model Polishing Skid, S/N 93A710, with Aquafine UV 6 Blub Light, Model CSL-6R S/N JS94009 (Located in North Carolina #121)

Ozonia Ozone Generater, Model CFS-1A, S/N CH-CFS-1A262, On Stainless Steel Stand (Located in North Carolina #122)

Accu Mass Am 200 Flow Sensor Model: RFT9739E43UJ RFT S/N: 1713731 Sensor S/N: N-85-250 VAC(Located in North Carolina #123)

Filterite Water Polishers with Filters, Model 910717-000, S/N LG, Pressure 150 PSIG at 200 Degrees, Diameter 8in x Length 36in, 2.5in IN 2.5in OUT (Located in North Carolina #124)

Filterite Water Polishers with Filters, Model 910717-000, S/N LG, Pressure 150 PSIG at 200 Degrees, Diameter 8in x Length 36in, 2.5in IN 2.5in OUT(Located in North Carolina #125)

Filterite Water Polishers with Filters Model: 910717-000 S/N: LG Pressure 150 PSIG at 200 Degrees, Diameter 8in x Length 36in, 2.5in IN 2.5in OUT(Located in North Carolina #126)

Filterite Water Polishers with Filters Model: 910717-000 S/N: LG Pressure 150 PSIG at 200 Degrees, Diameter 8in x Length 36in, 2.5in IN 2.5in OUT(Located in North Carolina #127)

Polar Air Steel Air Compressor Tank, PSI 450, Part Number A12410(Located in North Carolina #129)

Pro Source Compressed Air Storage Tank, Model PA85-T52, Code Number 001E08Y 0777(Located in North Carolina #130)

US Motor 25HP for Angelus 120L Seamer, Model T811,1770RPM (Located in North Carolina #131)

ERVE 5HP, Model 3X1.5X5F, S/N A00142  (Located in North Carolina #132)

7.5 HP S/N Unibloc-pc 10532 1.5in IN 1.5in OUT, On A Stainless Steel Skid (Located in North Carolina #118)

Hanson Technology Ammonia Valve, Model HA4AS, S/N V11P, 2in/50mm (Located in North Carolina #133)

Hanson Technology Ammonia Valve, Model HA4AS, S/N V11M,1in/25mm (Located in North Carolina #134)

Hanson Technology Ammonia Valve, Model HA4AP, S/N 09DM, 1in/25mm (Located in North Carolina # 135)

Hanson Technology Ammonia Valve, Model HA4APS-71, S/N: 05GH, 3in/80mm (Located in North Carolina # 136)

Hanson Technology Ammonia Valve, Model HA4APS-71, S/N 07GH, 3in/80mm  (Located in North Carolina # 137)

Parker Solenoid Valve S4A, S/N 92011(Located in North Carolina #138)

Allen-Bradley A AC Motor Drive Variable Frequency for Tank Agitator, S/N 407270008 (Located in North Carolina #139)

Sorgel Three Phase Transformer, Number 32749-17212-036,15 KVA, High Voltage 480, Low Voltage 208/120, 60 Hz (Located in North Carolina #140)

Equipment Located in Tennessee 

New Sine Portable 2-HP Positive Displacement Pump, Model MR-135, S/N 111180205, Mounted on S/S Frame with Wheels, 3″ Tri-Clamp Inlet and Outlet, 6-1/2 – 39 Output RPM, Eurodrive 230 / 460 V (Located in Tennessee # 167)

Sine Positive Displacement Pump, Model MR150, S/N 126151106, 4″ Tri-Clamp Inlet and Outlet (Located in Tennessee #168)

Graco All S/S Air Operated Drum Unlaoding Pump, Model Buldog, S/N 949444, Air Operated, 10:1 Ratio, 1,000 PSI Working Pressure, Max Input Pressure 100 PSI, Complete with Air Regulators and Discharge Hose (Located in Tennessee # 169)

2013 Dimplex Thermal Solutions Chiller, Koolant Koolers, Model SVI-500-M, S/N 38527, S-Series, Self Contained 5-Ton Industrial Chiller, 60,000 BTU Cooling Capacity, Design Pressure 450 PSI High Side, 80 PSI Low Side, 3/60/460 V, Approx 35″ x 37″ x 68″ (Located in Tennessee # 170)

Single Tank Skid-Mounted S/S CIP System, 600 Gallon Dome-Top Tank, ACG Plate Heat Exchanger, Flowverter Panel, SCB 25 HP Centrifugal Supply Pump, Anderson 3″ Flowmeter, Hoffman HW, Condensate Unit with (2) Supply Pumps, S/S Control Panel with Allen Bradley Panel View Plus 1,000, Andersopn AV9900 Controller, PH Analyzer, Mounted on S/S Skid (Located in Tennessee #171)

Waukesha Cherry Burrell S/S Ingredient Feeder, Model IF230P, Min Throughput: 105 GPH, Max Throughput: 3,170 GPH, Max Ingredient Capacity 500 GPH, Min Ingredient Capacity: 9 GPH (Located in Tennessee #172)

Lanfranchi Bottle Unscrambler, Model L2.SR.14.18, S/N 13569.92803, Nominal Speed 18,000 BPH,3kw, 480/60, Assitant Voltage 24 V DC, Air Pressure 7 Bar (Located in Tennessee #175)

Rionde Bottle Storage Silo, Model CPL1, S/N 391, (30,000) 500 ML Bottle Capacity (Located in Tennessee # 176)

Sidel Bottle Filer with Zalkin Bottle Capper, Model SFS-120, S/N WRIB00103, 72,000 BPH (Located in Tennessee #177)

Krones Canmatic Cut and Stack Labeler, Model 960-32, S/N 073-R23, 460V, 3 Phase, 60 Hz, Rated Current 27 amps, Large Motor / Unit FLA 11.5 amps, ICW / ICU -14kA, Connection Diagram K-073R23-001 (Located in Tennessee #178)

Douglas Case Packer, S/N M-102024, 70 CPM, Wiring Diagram 102024-WD01 Through WD07, 480 V, 3 Phase, Large Motor 11.9 AMPS, 60 Hz, Full Load Current 40.15, Approx Dimensions: 50’ x 10’ (Located in Tennessee #179)

Douglas Case Packer, S/N M-102024, 70 CPM, Wiring Diagram 102024-WD01 Through WD07, 480 V, 3 Phase, Large Motor 11.9 AMPS, 60 Hz, Full Load Current 40.15, Approx Dimensions: 50’ x 10’ (Located in Tennessee #180)

Sentry Approx ___’ S/S Bottlign Conveyor, (Located in Tennessee #181)

Sentry Approx ___’S/S Bottle Accumulation Table (Located in Tennessee #182)

Kister Shrink Wrapper, Model 601-T-03, S/N 210-03, 70 CPM, Oven Temp 550 Degree Thermostat,460/3/60, FL AMP 100, AMP Rating 7.5, Short Circuit Capcity 25K, Drawing W5210EL (Located in Tennessee #183)

Kister Shrink Wrapper, Model 601-T-03, S/N 210-03, 70 CPM, Oven Temp 550 Degree Thermostat,460/3/60, FL AMP 100, AMP Rating 7.5, Short Circuit Capcity 25K, Drawing W5210EL (Located in Tennessee #184)

Ryson Spiral Conveyor, Type 1300-400-C3, Left Hand Unit, 4.5 Turns, Infeed 4’ Off Ground, Outfeed 15’ Off Ground (11’ Elevation Change), 5 HP Drive Motor, 6.8 AMPS, 460/3/60, Speed: 180 FPM, Prox Switch 110 VAC (Located in Tennessee # 185)

Ryson Spiral Conveyor, Type 1300-400-C3, Right Hand Unit, 4.5 Turns, Infeed 4’ Off Ground, Outfeed 15’ Off Ground (11’ Elevation Change), 5 HP Drive Motor, 6.8 AMPS, 460/3/60, Speed: 180 FPM, Prox Switch 110 VAC (Located in Tennessee # 186)

Equipment Located in Tennessee, Louisiana & Florida

Girton 3-Compartment Glycol Jacketed Flavor Tank, Equipped with Vertical Agitation, 2″ Tri-Clamp Outlet, One Compartment Leaks and Missing Agitator Motor (Located in Tennessee #66)

Alfa Laval MRPX 314 GV-74C Separator, S/N 3 703512, Pace Maker 30 HP Motor, Motor Model 9129835, Spare 30 HP Motor Included with Sale Price (Located in Louisiana #66A)

Miscellaneous Homogenizer and Anderson Tank Gauges (Located in Florida #66B)

Cherry Burrell Air-Valves, Tri- Clover Air-Valves and (1) Ball Check Valve (Located in Florida #66C)

(2) Tri-Clamp Sight Glass, 2” and 3” (Located in Florida #66D)

Cherry Burrell 15 HP Sanitary Centrifugal Pump, Model 2065, S/N 32343902, 1-1/2” Tri-Clamp x 2-1/2” Tri-Clamp, Starter Included, 3 Phase, 60 Cycle, 230/460 V (located in Florida #66E)***Loading and Freight Within US Included

Equipment Located in Ontario

2009 Krones PS Labeler, Model AutoCol, S/N K74858, Pressure Sensitive Labeler Built in 2009 and Used for 6 Months, 6 Platform,  Rotary,  PS Labeler, Dual Aggregate APS3 Heads, Large 377 mm Centers,  Condition is Excellent,  460 Volt, 3 Ph,   Allen Bradley Logix 5561 CPU,  Right to Left (Counter-Clockwise) Flow, No Skid (Lcoated in ONT, CAN Lot #61)

Equipment Located in South Carolina

3M case sealer, Model 77RKS, S/N 5621, Top and Bottom, Semi-Auto, Random Adjust Case Taper, Skidded (Located in South Carolina #25)

ABC Case Sealer, Model 30+47, S/N 2677, Top and ottom, Automatic Case Sealer with Nordson, No Skid (Located in South Carolina #26)

Arpac Shrink Bundler, Model 106-16, S/N 3442, Small Carton Accumulator/Stacker into Film Shrink Wrapper, No Skid (Located in South Carolina #27)

Arpac Shrink Bundler, Model 1058-24, S/N 1396, S/Sl, Last Running Round Ice Cream Containers, Clear Film, Skidded (Located in South Carolina #28)

Douglas Conveyor, 11′ x 9″ x 33″ Plastic Chain Height, Index Gate, Index Sensor, No Skid (Located in South Carolina #29)

Hytrol Conveyor, Power Roller with Gear Box Drive and Speed Control — 180″ x 15″, No Skid, (Located in South Carolina #30)

Hytrol Conveyor, Power Belt with Gear Box Drive and Speed Control  — 132″ x 14″, No Skid (Located in South Carolina #31)

Lantech Conveyor, 51″ Wide, Heavy Duty Pallet Conveyor, Three 5′ & one 6′ Sections, No Skid (Located in South Carolina #32)

Keenline Conveyor, 16′ x 7″ Wide SS “U” Shape on Casters, Wash-Down, No Skid (Located in South Carolina #33)

Delkor Tray Former, Model 751, S/N 728, Single Head Tray Former Gluer with Nordson, No Skid (Located in South Carolina #34)

Federal Filler, Model 36-9, S/N 1069S369LA467,  8,16,32 oz Parts, Screw Cap 33, 4 7/8 Pitch, No Cap Hopper Chute, Skidded (Located in South Carolina #35)

Filler Specialties Filler, Model GWFS248R, S/N 18695, Half Gal, Snap, No Bowl, Chute etc,1″  Valve, 7 7/8 Pitch, Skidded (Located in South Carolina #36)

Douglas Tray Packer, Model FTF, S/N M-4812, Last Set on a 12 Pack of Cans in a 2″ Deep Tray, Skidded (Located in South Carolina #37)

Hartness Tray Former, TF-50, S/N 16-051, Corrugated Tray Former with Nordson, No Skid (Located in South Carolina #38)

Hartness Case Sealer, Model CTS 30, S/N 17-205, Top Case Gluer with Norson, Skidded (Located in South Carolina #39)

Heat Seal Shrink Tunnel, Model T3422/10, GKA9627, Shrink Tunnel with 18″ x 8″ Opening, 60″ x 32″ x 58″, 33″ In/Out,  Skidded (Located in South Carolina #40)

Econo Corp Cartoner, Model Spartan, S/N 9352, End Load with Hot Melt Seal, Last on Ice Cream Products, Wash Down and Full Stainless, No Skid (Located in South Carolina #41)

Horix Rotary Filler, Model HBV-2849, S/N 87, Last on Energy Shot 4oz Bottles. 28ct 1/4″ Valves with 3 1/2″ Ptich, No Skid (Located in South Carolina #42)

Klik Lok Tray former, Model JR, S/N JR-641, Older, Basic tray Former for Self Locking Trays, No Skid (Located in South Carolina #43)

Elliott Case Sealer, Model 85AT, S/N 93-12-21, Fully Automatic Top and Bottom Case Taper with Index Gate, Skidded  (Located in South Carolina #44)

McDowell Case Erector, Model 101T RH S/N 3981092, Case Erector Taper with 2″ Heads and AB Controls, Skidded (Located in South Carolina Lot #45)

McDowell Case Erector Model 101T RH, S/N 3981091, Case Erector Taper, Missing AB, Encoder, Head and Pushers, Skidded (Located in South Carolina #46)

Mettler Check Weigher Model CM/EL, S/N 14706, Check Weigher, Skidded (Located in South Carolina #47)

MGS Tray Former Model CFG-250, S/N 4604, Dual Mandrel Tray Former for Corrugated or Fiber Board, Nordson, No Skid (Located in South Carolina #48)

Nigrelli Tray Former S/N CMTF-100, Model TF99-1838-3, Very high speed tray former with Nordson ProBlue 10 hot melt, skidded (Located in South Carolina #49)

Orion Stretch Wrapper Model M-67-7, S/N 3053600, Floor Mounted, Rotary Arm Pallet  Wrapper with Security Fence, No Skid (Located in South Carolina #50)

Pearson Case Sealer Model N401, S/N 9904019091, High Speed Top Case Sealer with Nordson Hot Melt, No Skid (Located in South Carolina #51)

Randles AE Tray Former, Model 16-26, S/N VF 3399, Tray former for Corrugated or Fiber Board, Self Locking Trays, No Skid (Located in South Carolina #52)

Randles, AE Tray Former Model 22-44, S/N VF-6013, Tray Former for Corrugated or Fiber Board, Self Locking Trays, No Skid (Located in South Carolina Lot #53)

ROE Case Lowerator/Elevator, Model Lowerator, S/N 5657-MGLS, Case Lowerator with Gripper Belts, Skidded (Located in South Carolina Lot #54)

Signode Case Sealer, Model RCS-425-1, Top and Bottom 2″ Case Taper, Semi Automatic, Random Adjust, Skidded (Located in South Carolina #55)

Southern Tray Former, Model TE700, S/N 5531Tray Former with Nordson, Beverage Tray. Needs Some Work, No Skid (Located in South Carolina #56)

Sprinter Tray Former, Model MP 11, S/N 32364, Tray Former for Self Locking Trays, Skidded (Located in South Carolina #57)

Filtec Laser Coder, Model Lasetec ID, S/N 22092 Digital Laser Coder with Fumex Extracter, Skidded (Located in South Carolina #58)

Domino Laser Coder, Model 121U1102 0000, S/N C2479, Digital Laser Coder, Skidded (Located in South Carolina #59)

Sollas Bundle Bander, Model B50/MPC, S/N 602-001, Single Head 2″ Bander, No Skid (Located in South Carolina #60)

Pace Bottle Unscrambler, Model CP4, S/N 827, 46″x54″ Hopper-Elevator, 46″ Bowl with 40″ Disk, Needs “Orange” Belts, Skidded (Located in South Carolina #62)

Hoffman Elec Enclosure, Model 61x60x12, Dual Door, AB SLC 5/04, AB PowerFlex 40 VFD, No Skid (Located in South Carolina #63)

Hoffman Elec Enclosure, Model 36x32x8, Single Door, AB SLC 5/04.  Never Used in Production, No Skid (Located in South Carolina #64)

Rexroth Servo Motors (2), Model Servo, Both mounted with Stober ServoFit Precision Gearheads (Located in South Carolina #65)

Equipment Located in Nevada

All S/S Sweco 48″ Vibratory Sifter Model g48s Includes (2) NEW Screens (Located in Nevada #151)

Rietz Model RS28K52066 25HP Twin Shaft Blender Approximately 50 cu/ft 8’x5’x5′ Includes all S/S Operators Platform (Located in Nevada #2)

Fitsmill Model D Comminuting Mill with 7.5 HP Motor(Located in Nevada #158)

Loma Superscan Metal Detector with Integral Loma 2500 Checkweigher S/N 27907(Located in Nevada #152)

Metler Toledo Checkweigher with Lynx readout and RJS Thermal Laser Printer 8′ Long S/S Belt Driven Conveyor with 90° turn and 9″ Interlox Belting (Located in Nevada #156)

AEW all S/S Construction Band Saw with 3HP Motor Model 400M S/N LHS332896 (Located in Nevada #1)

Koss Ultrasonic Feta Cheese Cutter, S/N: 55052, with (2) Heads, (3) S/S Harps, Conveyor, and Dukane 1000 Sonic Generator (Located in Nevada #157)

All S/S Band Saw with 3 HP Motor (NOTE: Missing panel, Located in Nevada #164)

28′ total motorized 640 Block Conveyor including 3 sections of conveyor and a lift station (Located in Nevada #160)

Bizerba 13″ S/S Deli Slicer(Located in Nevada #159)

Bizerba 13″ A330-FB@ S/S Deli Slicer with Outfead Conveyor and Integral Scale (Located in Nevada #163)

Mateer Piston Filler with 2 Bowls S/N 33-A-5310 (Located in Nevada #155)

Eastey Heat Shrink Tunnel model et2008 s/n 6942008TLPVC 6′ Length 20″ wide belt 8″ tall opening (Located in Nevada #154)

PFM Roll Fed Labeler S/N 084212(Located in Nevada #166)

Reimers Model R72 S/N 1210-70123 100 PSI 1.25 HP PACKAGE BOILER SYSTEM (Located in Nevada #165) 

Ingersoll Rand Model 3000E30 S/N 30T 761099 6cyl recipricating Air Compressor 25/20 HP(Located in Nevada #162) 

Approximately 80 ft of assorted 4″, 6″, & 8″ roller, link and belted conveyor (Located in Nevada) 

Phoenix Belt Driven Conveyor in (2) Sections 14″x63″ & 12″x102″ (Located in Nevada #161)